Morris 74200 User manual

Questions, problems, missing parts? Before returning to the store,
call Morris Products Customer Service
8:30am – 5:00pm, EST, Monday – Friday
1-888-777-6678
WWW.MORRISPRODUCTS.COM
www.morrisproducts.com
USE AND CARE GUIDE
RAYZR LED FLOOD LIGHT
THANK YOU!
We appreciate the trust and confidence you have placed in MORRIS Products
through the purchase of the RAYZR FLOOD LIGHT. We strive to continually create
quality products designed to enhance your life. Visit us online to see our full line of
electrical products available for your needs.
Thank you for choosing MORRIS Products.

Table of Contents:
Safety Information

LIMITED WARRANTY
The manufacturer warrants this products to be free from defects in materials and workmanship for a period of two
(2) years from the date of purchase. This warranty applies only to the original consumer purchaser and only to
products used in normal use and service. If this product is found to be defective, the manufacturer's only obligation,
and your exclusive remedy, is the repair or replacement of the product at the manufacturer's discretion, provided
that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect, or
mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or
used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a
failure of the product as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation, or any
other failure not relating to faulty material workmanship. The manufacturer specifically disclaims any liability and
shall not be liable for any consequential or incidental loss or damage, including labor/expense costs involved in the
replacement or repair of said product.
Warranty
Pre-Installation
Planning Installation
Read all instructions completely before you begin installation
Tools Required
Phillips
screwdriver
Hardware Required
__AA __BB
NOTE: Hardware not shown to actual size

Pre-Installation (continued)
Planning Installation

1) Using a screw driver or drill, secure the
flood light bracket to a solid surface using
screws provided.
2) Loosen screws 1A and 1B to adjust
fixture angle. Tighten to secure.
Installation without mounting clips Installation with mounting clips
Installation - Surface Mounting
Installation without mounting clips
1) Place mounting clips over bracket
holes.
2) Using a screw driver or drill, secure
mounting clips over the bracket
holes into a solid surface using the
screws provided.
a) Note: It is not necessary to
use the mounting clips
though they may help
increase mounting strength.
3) Loosen screws 1A and 1B to adjust
fixture angle. Tighten to secure.
Installation with mounting clips
Screw 1A
Screw 1B
Screw 1A
Screw 1B