Mosentek MD005 User manual

5.8GHz Compact Size Microwave Sensor Switch
MD005
5.8GHz Compact Size Microwave Sensor Switch
PEODUCT.:
MODEL NO.:
SPEC NO.:
R & D DEPARTMENT
APPROVEDCHECKEDWRITED BY
Back Side
Front
Enabling Technology Serving People
Model: MD005
Add：Block H 5F; Huamingchen Hi-Tech Industry Park; Genyu Road; Matian Street; Guangming District; Shenzhen PRC.
Email: [email protected] Tel: [phone]

Dimension (Unit: mm)
- 01
Ultra thin configuration for light fixture build in.
Compact size flat antenna (11*61mm W*L) for easy installation.
Flat antenna emiting design no sensing blind zone.
Back side terminal block for fast wiring
5 years warranty.
Features
12345
Antenna module
Daylight sensor
Installation hole
DIP switch
Input
Output
17
6.5
88.5
77
83
61
11.5
3
37.5
ø2.5
ø2.5
Add：Block H 5F; Huamingchen Hi-Tech Industry Park; Genyu Road; Matian Street; Guangming District; Shenzhen PRC.
Email: [email protected] Tel: [phone]
Enabling Technology Serving People
Model: MD005
Technical data
Operating voltage
Switching capacity
Stand-by power
Output
Microwave frequency
Microwave power
Sensitivity
Hold time
Daylight threshold
Mounting height
Detection range
Detection Angle
Operating temperature
IP rating
size (L*W*H）
Warranty
100-277VAC 50/60Hz
Max. 400W @220VAC
<0.5W
ON/OFF
5.8GHz±75MHz
<0.3mW
100%/50%
5s/1min/3min/10min
Disable/50Lux/25Lux/10Lux
Max.5m (Ceiling mounted); 1.5-1.8m (Wall Mounted）
Radius Max.4m (Ceiling mounted 3m); Max.10m (Wall Mounted 1.8m）
30°-150°
-35°C~70°C
IP20
88.5*37.5*13.5mm
5 years
Note
Input
Sensor
Parameters
Output
Default setting: Sensitivity 100%,Hold time 5s,Daylight threshold Disable.
Wiring diagram
LED Driver
N
L
L
N
LED+
LED-
Attention：The switch is designed for
connecting a single loading, it will affect the
liftime if connecting more than one loading.

Detection coverage
Sensitivity:100%100%
Settings
Disable
50Lux
DIP switch
Daylight threshold
4 5
25Lux
10Lux
5s
1min
DIP switch
Hold-time
2 3
3min
10min
100%
50%
DIP switch
Sensitivity
1
- 02
12345 ON
OFF
In this area,movement
will be detected and
able to trigger the
sensor. 100% detection
area is also known as
the strong sensitvity.
The period of light keeping
100% brightness after
moving objects leave the
detection area.
Definition of the ambient
brightness; only when the ambient
brightness is lower than the preset
specific lux amount, the sensor will
work; when it's preset as "disable",
the sensor will detects motion
regardless the ambient brightness.
Application
With sufficient daylight, even
when motion detected, light
remains OFF.
With insufficient daylight, when
motion detected, light ON.
After people leave the detection
area, light remains 100%
brightness within hold time.
After the last detection and
the preset hold time elapsed,
light OFF.
Automatically ON/OFF function：
1. The daylight threshold is set to "10Lux/25Lux/50Lux”
Add：Block H 5F; Huamingchen Hi-Tech Industry Park; Genyu Road; Matian Street; Guangming District; Shenzhen PRC.
Email: [email protected] Tel: [phone]
Enabling Technology Serving People
Model: MD005
Left
Front Queen
Right
1
1
1 2
2
2 3
3
3 4
4
4 5
5
5 6
6
1
2
3
4
5
6
6
左Wall
Square
右
11 22 33 44 55 8 989 77 66
1
2
3
4
5
6
7
8
9
后 Back
Sensor mounting direction
Front
Right
Left
Queen

- 03
Corridor Staircase Parking
Applications
Wiring must be strictly in accordance with the wiring diagram to avoid short circuit.
The detected surface cannot be shielded by metal objects.
Microwave sensor can be installed in any lamp except the one with full metal shell.
Should be kept away from the driver to avoid interference generation and lamp flashing.
Shall not be installed next to large operating machines such as ventilator/ceiling fan to avoid false triggering caused by machine vibration.
Suitable for indoor installation to avoid false triggering due to external factors such as rain, wind or tree swing.
Installation precautions
When motion is detected, the
sensor will switch on the light to
100% brighteness.
After people leave the detection
area, light remains 100%
brightness within hold time.
After the last detection and
the present hold time elapsed,
light OFF.
2. The daylight threshold is set to "Disable". Light on when detect movement, After people leave, Light off after Hold-time.
Add：Block H 5F; Huamingchen Hi-Tech Industry Park; Genyu Road; Matian Street; Guangming District; Shenzhen PRC.
Email: [email protected] Tel: [phone]
Enabling Technology Serving People
Model: MD005

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party
responsible for compliance. such modifications could void the user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm
between the radiator and your body, and fully supported by the operating and installation