Moticon Insole3 User manual

Moticon SCIENCE
Effective August 1, 2019
PRELIMINARY
Instruction Manual
SCIENCE

Content
Warning Symbols and Labeling
02
03
Overview04
Intended Use05
Operation Modes06
Connectivity08
Software Setup09
Safety Instructions10
Sensor Insole Setup12
Handling Instructions15
Environment17
Reprocessing16
Product Compliance18
System Functions07
Data Acquisition Procedure13
Imprint19
Moticon SCIENCE Instruction Manual 03.00.00

The following signs and symbols are used in this instruction manual, the SCIENCE Sensor Insole
labeling, and the packaging labeling:
Warning Symbols & Labeling
Safety critical warning
Safety critical warning, prohibited action
Safety critical warning, mandatory action
Indicates that the insctructions for use must be consulted
Keep away from children
Do not dispose of in your household waste (EU WEEE Directive 2012/19/EU)
Device serial number
Temperature range for operation / storage
Humidity range for operation / storage
Handle package with care
On the sensor insoles, the labeling is located in the mid area of the lower surface. On the packaging,
handling instructions are given on the outer surface of the packaging.
03
Moticon SCIENCE Instruction Manual 03.00.00

The Moticon SCIENCE Sensor Insole is a versatile tool for sensing human foot dynamics.
The sensor insole is fully integrated and highly flexible. It incoporates all technological components to
execute standalone measurements. No external devices are required for data acquisition.
The following table depicts the basic specifications. For more information, refer to the detailed
product specifications on www.moticon.de/support.
Sensors
Power Supply
Wireless
16 pressure 3 acceleration 3 angular rate per side
Bluetooth Low Energy
PD2032 coin cell battery, rechargeable
Sizes 9 double sizes EU 32/33 - 48/49 US 1/2 - 12½/13½
Data Storage On-board memory & live transmission to smartphone
Model
Insole3
Overview
04
Moticon SCIENCE Instruction Manual 03.00.00

In the following, the terms "sensor insole" and "product" refers to an individual left / right
Moticon SCIENCE Sensor Insole, as well as to a pair of sensor insoles.
Intended Use
Intended Use
Measurements may be incorrect when the product is used outside of the defined
intended use.
Professional use only.
Always keep the product and the coin cell batteries away from children to prevent
swallowing.
The sensor insole is inteded to be used inside a shoe for measuring the plantar pressure
distribution at the sole of foot, and the acceleration in three aces and rotation of the foot
in three axes.
This product is not a medical product. It is the responsibility of the user to interpret the
measurement data obtained from the product, and no diagnosis or treatment decision may
be carried out soley on the basis of the data obtained from the sensor insole.
Contraindications
The following conditions are absolute contraindiciations for using the product:
- open wounds of the foot, irritated or otherwise unhealthy foot skin
- orthopedic or other reasons depending on the health status of the wearer, which do not
allow for waring the sensor insole
- severe gait impairments where the sensor insole might increase the risk of fall
- inability of the wearer to wear closed shoes for wearing the sensor insoles
When applying the sensor insole to a wearer for more than one day , the user applying the
product to the wearer must ensure that the wearer will not encounter negative orthopedic
long-term effects from wearing the product, and must instruct the wearer to report discomfort
and pain due to wearing the device, and to stop wearing the sensor insole in such case.
05
Moticon SCIENCE Instruction Manual 03.00.00