Motorola ASTRO APX 4000XH Series Reference guide

English
m
ASTRO®APX™ 4000XH Series
Digital Portable Radios
Quick Reference Card
RF Energy Exposure and Product Safety
Guide for Portable Two-Way Radios
ATTENTION!
This radio is restricted to Occupational use only. Before using
the radio, read the RF Energy Exposure and Product Safety
Guide for Portable Two-Way Radios which contains important
operating instructions for safe usage and RF energy awareness
and control for Compliance with applicable standards and
Regulations.
Radio Controls
Radio On/Off
Select Zone and Channel
Receiving and Transmitting
Sending an Emergency Alarm
* Default timer of Emergency button press to
activate Emergency is 50 milliseconds. This
timer is programmable, see Emergency
Operation in the user guide for details.
To exit emergency at any time, press and hold
the Emergency button.
Battery
Accessory
Connector
Microphone
Antenna
On/Off/Volume
Control Knob
•On – Rotate the On/Off/Volume Control
Knob clockwise until you hear a click.
•Off – Rotate the On/Off/ Volume Control
Knob counterclockwise until you hear a click.
1Rotate the preprogrammed 16-Position
Select Knob to the desired channel.
1Select zone/channel.
Data Feature
Button
Side Button
1
Side Button 2
__________
PTT Button
Microphone
Top Lightbar
Indicator
Top Side
(Select)
Button
_________
Main
Speaker
Main Display
Top (Orange)
Button
___________
LED
Keypad
Menu Select
Buttons
4-Way
Navigation
Button
Home
16–Position
Select Knob
Bluetooth
Pairing
Location
Indicator
2Listen for a transmission.
OR
Press and hold Volume Set button.
OR
Press Monitor button and listen for activity.
3Adjust volume, if necessary.
4Press the PTT button to transmit; release to
receive.
1Press and hold the Emergency button*.
2The display shows Emergency and the
current zone/channel. Radio sounds a short,
medium-pitched tone, and the LED blinks red
momentarily.
3When acknowledgment is received, you hear
four beeps; alarm ends; and radio exits
emergency.
*PMLN7345B*
PMLN7345B
Learning Experience Portal (LXP) Manual do Usuário e documentação relacionada disponíveis em: https://learning.motorolasolutions.com/ (Para
maiores informações sobre medidas da Taxa de Absorção Específica (SAR) e conformidade, consulte o Manual do Usuário através do endereço
eletrônico acima) Consulte também o site da Anatel para informações adicionais: www.anatel.gov.br
PMLN7345.fm Page 3 Tuesday, August 27, 2019 4:44 PM

English
Sending an Emergency Call
To exit emergency at any time, press and hold
the Emergency button.
Sending a Silent Emergency Call
To exit emergency at any time, press and hold
the Emergency button.
Display Status Icons
1Press the Emergency button.
2Press and hold the PTT button. Speak clearly
into the microphone.
3Release the PTT button to end call.
4Press and hold Emergency button to exit
emergency.
1Press the Emergency button.
2The display does not change; the LED does
not light up, and there is no tone.
3Silent emergency continues until you:
Press and hold the Emergency button to exit
emergency state.
OR
Press and release the PTT button to exit the
Silent Emergency Alarm mode and enter
regular dispatch or Emergency Call mode.
Receiving a call or data.
Transmitting a call or data.
u
t
Blinks when the battery is low.
The more stripes, the stronger the
signal strength for the current site
(trunking only).
Direct radio to radio communication or
connected through a repeater.
On = Direct
Off = Repeater
This channel is being monitored.
L= Radio is set at Low power.
H= Radio is set at High power.
Scanning a scan list.
Blinking dot = Detects activity on the
Priority-One Channel
during scan.
Steady dot = Detects activity on the
Priority-Two Channel
during scan.
The vote scan feature is enabled.
8
v
O
M
HOR .
i
j
k
On = User is currently associated with
the radio.
Off = User is currently not associated
with the radio.
Blinking = Device registration or user
registration with the server failed due
to an invalid username or pin.
Data activity is present.
On = Secure operation.
Off = Clear operation.
Blinking = Receiving an encrypted
voice call.
Bluetooth is ready.
Bluetooth is connected to the device.
On = GPS enabled, and location signal
available.
Off = GPS disabled.
Blinking = GPS enabled, but location
signal unavailable.
n
o
m
b
a
G
Menu Navigation
<or >to Menu Entry.
{, |, or }directly below
Menu Entry to select.
Hto exit.
Uor Dto scroll through sub-list.
{, |, or }directly below
Menu Entry to select.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and
are used under license. All other trademarks are the property of their respective owners. © 2015 and 2019 by Motorola Solutions, Inc. All Rights Reserved.
1303 East Algonquin Road, Schaumburg, Illinois 60196, U.S.A.
PMLN7345.fm Page 4 Tuesday, August 27, 2019 4:44 PM