Motrex H100 User manual

User Manual
(Head Up Display)

Table of Contents
▣ Before use (HUD, OBD )
1. Components｜5
※ MOTREX HUD Main Body Buttons
2. HUD Installation｜7
3. MOTREX HUD APP Installation & HUD Connection｜10
4. WAZE APP Installation｜10
5. WAZE Navigation｜11
6. MOTREX HUD APP Settings｜12
1) Car information settings
2) OBD information correction
3) HUD Setting
7. Display ｜19
8. OBD Update ｜22
(If the firmware related to OBD is separately operated)
9. Firmware Update｜26
10. Product Specifications and other Information｜28
1) Product specifications
2) FCC regulations
■ 2

3 ■
Checklist Before Use - HUD
▶ MOTREX HUD is a navigation system that uses WAZE MAP.
▶ Both MOTREX HUD APP and WAZ APP need to be installed on the user's mobile phone.
▶ Once MOTREX HUD APP is open and the destination has been entered on WAZE,
the GPS navigation can start .
▶ As the information is delivered through the WAZE server, the estimated arrival time on
WAZE and HUD may not match.
▶ WAZE only works and the connection with HUD is maintained while MOTREX HUD APP
is on. (only inside the car)
▶ Navigation starts by opening MOTREX HUD APP and clicking the navigation button to
start WAZE MAP.
- For auto start navigation, navigation is automatically connected when HUD APP is launched.
▶ Display protection
- HUD display angle tilted by 45 degrees when the car is parked
·When the surrounding environment is bright or the temperature rises due to the strong sunlight, tilt the display angle
by 45 degrees to protect the display.
- When the temperature inside the car is high, the display brightness is dimmed.
·When the car is parked outdoor in the summer, the display may be dimmed when the HUD is launched.
- Do not manually adjust the display (TOLED) angle by force.
·Forcefully moving the display (TOLED) angle may break the product.
- 'Auto' brightness is recommended for the display (TOLED).
·When the display is used for a long time at a high brightness setting, the life of the display (TOLED) may
shorten.
▶ The power for MOTREX HUD H100 is supplied through OBD Ⅱ.
- If the car model is supported by OBD II, the car setting can be established in MOTREX HUD APP.
·Ask the seller or the installer for the types of car models supported.
· If you do not have a vehicle on the OBD II supported vehicle list, you can use it by entering the OBD II Standard information.
(It is limited to Hyundai and Kia vehicles.)
▶ MOTREX HUD APP may not work if the user's mobile phone in the battery saver mode.
- When the mobile phone display is off or when MOTREX HUD APP is running on the
background
Supported OS : iOS 10.0 or higher / Android 5.0 or higher

■ 4
Checklist Before Use - OBD
▶ For the OBD Ⅱ setting, the car must be fully started and MOTREX HUD APP must be
launched.
(Setting cannot be modified under ACC ON or KEY ON status.)
▶ Please reenter and save the car information after an OBD Ⅱ firmware or DB file update.
▶ Please check the information (year/fuel type/mileage) on the vehicle registration before
entering the car information on OBD Ⅱ.
(When using the car information (vehicle identification number) attached to the car, OBD
Ⅱ communication may not work properly.)
▶ Although the car model name is the same due to the manufacturer’s categorization by
model year, the cars actually supported may be different from the list of cars supported.
▶ There may be restrictions in functions depending on the car’s grade (trim) and
options.
▶ There may be restrictions in some functions (genuine trip setting) related to OBD Ⅱ
communication. In this case, the operation is only enabled under ACC ON status.
▶ OBD Ⅱ is not supported for a car with structural modification.
▶ For some hybrid cars and cars that use two types of fuel, the fuel efficiency information
may not match the actual measurement.
If necessary, please correct the fuel efficiency before use.
▶ For electric cars, the fuel efficiency option is disabled. Remaining gas is replaced with
the battery charge rate.
▶ Fuel efficiency and distance to empty may change according to the driving condition,
therefore, it may be different from the officially recognized value or the actual distance
traveled. If necessary, please correct the fuel efficiency before use.
▶ For some car models, the method of installation may be different.
▶ When more than 7 car DB has been registered on OBD Ⅱ, OBD Ⅱ will not work and
there will be no compensation. This does not apply if a same car is being registered
repeatedly.
▶ Vehicles not listed on the supported vehicle list (passenger standard, vehicles fitted with
standard OBD) should be used by setting the vehicle to OBD II Standard on other vehicles.
(It is limited to Hyundai and Kia vehicles.)
▶ When connecting an OBD II module using Y-CABLE, there may be errors in the function
and operation of the product.
▶ The OBD II module must be used with direct contact with the vehicle connector.

5 ■
User Manual
(Head Up Display)
1. Components
HUD（main body)
HUD main cable
User manual
Angle-Adjustable cradle
OBD ll module
Fixed cradle
Fixing clip

■ 6
※ MOTREX HUD Main Body Buttons
※ When the HUD auto-start is selected on MOTREX HUD APP
** It automatically turns on when starting up the car (ACC ON) and off when the engine turns off (ACC OFF).
※ When the HUD auto-start is not selected on MOTREX HUD APP
** The user can manually turn on/off with the power button.
※ The LCD (TOLED) may break when the angle is adjusted by force.
※ The standard for ACC ON may differ by car model.
Reset
- Press with a sharp object to reset
the HUD.
LCD(65K color AM TOLED)
- Use the HUD APP to adjust the angle.
Power (touch sensor)
- When the power button is pressed, the LCD (TOLED) opens
and turns on.
- When the power button is pressed when the power is on, the
LCD (TOLED) closes and the system is turned off.

7 ■
※ When the first OBD module is connected to the vehicle, the HUD will illuminate for 10 minutes.
Please set up the vehicle in the MOTREX HUD APP.
The HUD APP automatically switches off after 10 minutes without having to set up the vehicle, after
which the HUD must be switched on.
2. HUD Installation
Check where
the OBD
terminal is
1
Attach HUD to
the dashboard
5
Set the
HUD location
2
Organize
the cables
6
Embed the
HUD main cable
3
Connect the
OBD ll module
7
Connect the
HUD main cable
4
Connect the OBD ll
module with the
HUD main cable
8
1) Check where the OBD Ⅱ
terminal is.
(The location of the OBD terminal is
different by car.)
3) Embed the HUD main cable.
(Check the length of the main cable and then embed the HUD main cable.)
2) Decide where to install
the HUD.
(Decide the location and install. Order of
recommendation: 1, 2, 3)

■ 8
4) Connect the HUD main cable to the HUD.
(When connecting the HUD main cable, make sure the thicker part does not get inside the
place for the cables as shown in the image below.)
5) Attach the HUD on the dashboard.
(Install the HUD on the cradle and remove the 3M tape to attach the HUD on the dashboard.)
(Choose the cradle of your preference between the adjustable type and the fixed type.)
6) Use the clips to organize the line.
Adjustable Type Fixed Type
* Above images are provided for reference.

9 ■
7) Connect the OBD module to the OBD terminal.
8) Connect the OBD module with the HUD main cable.

■ 10
3. MOTREX HUD APP Installation and HUD
Connection
1) Open App Store (iOS) or Google Play Store (Android) on the
smartphone.
2) Search for “MOTREX HUD”.
3) Download and install MOTREX HUD APP from App Store (iOS) or
Google Play Store (Android).
4) Open MOTREX HUD APP.
5) Install MOTREX HUD APP and use Bluetooth to connect the
smartphone with HUD.
6) When the Bluetooth connection pop-up appears on the
smartphone display, select “Accept”.
(When Bluetooth has not been activated on the user’s
smartphone)
7) Select H100 on the HUD connection screen on the smartphone
to complete connection.
1) Open App Store (iOS) or Google Play Store (Android) on the
smartphone.
2) Search for “WAZE” in the search box.
3) Download and install WAZE APP from App Store (iOS) or Google
Play Store (Android).
4) Open WAZE.
※ Both MOTREX HUD APP and WAZE APP should be installed.
※ You can also install WAZE APP by selecting Navigation on the
main screen of MOTREX HUD APP.
4. WAZE APP Installation

11 ■
1) When the car starts, MOTREX HUD automatically turns on.
2) Open MOTREX HUD APP on the smartphone.
3) Press Navigation to start WAZE.
4) Type in the destination.
5) Search for the route and press Start Navigation to start the guide.
5. WAZE Navigation
※ The car information setting must be completed in MOTREX HUD APP to use
HUD.
※ Both MOTREX HUD APP and WAZE APP should be installed on the
smartphone.
※ When MOTREX HUD APP stops, HUD and the smartphone become
disconnected.
※ For navigation, both MOTREX HUD APP and WAZE APP need to be running,
and the destination must be set and navigation should be started on WAZE
APP for navigation.
※ Navigation starts after launching MOTREX HUD APP and then launching
WAZE MAP with the Navigation button.
(For auto start navigation, navigation is automatically connected when HUD
APP is launched.)
※ When the MOTREX APP icon appears on the top right of WAZE MAP,
navigation begins on HUD.

■ 12
6. MOTREX HUD APP Settings
HUD-related settings
Car information settings
See the software version, user manual,
and firmware updates.
When auto start is enabled,
WAVE Navigation starts
automatically when MOTREX
HUD turns on.
Start the WAZE Navigation
application.
MOTREX HUD
※ Before setting up the HUD, proceed to the vehicle information setting.
※ When the navigation auto-run is checked
- The WAZE APP runs automatically when you run the MOTRE HUD APP.
- If the MOTRES HUD APP is turned on but WAZE APP is shut down, the
mobile phone is disconnected from the HUD. When reconnected, WAZE APP
runs automatically.

13 ■
※ Visit the MOTREX website to check which car models are supported by OBDⅡ.
※ Please set the vehicle to OBD II Standard for use if it is not in the vehicle settings.
(It is limited to Hyundai and Kia vehicles.)
Enter the car i
nformation and
click SET
Select DB file
(Select the first file)
1) Car information settings
Select Car info
Settings
Select
CAR SETTING

■ 14
Click “Yes”
on the pop-up
to upload
OBD car setting
completed
Uploading
OBD file
Vehicle information
update is complete

15 ■
After OBDⅡ setting, the adjustment value can be modified
if the speed, fuel consumption shown on the dashboard
while driving are significantly different.
If you do not have a vehicle on the OBD II supported
vehicle list, you can use it by entering the OBD II
Standard information.
※ Make sure to press the Apply button after changing the setting.
2) OBD information correction
Select Car info Settings

■ 16
3) HUD settings
The display angle may be adjusted
from 50 to 100 degrees (by 10 degree unit).
When brightness is set to Auto, the display brightness is adjusted automatically
with the illumination sensor.
Between -10% and +10%, additional adjustment can be made to the current brightness level.
When Auto is not selected, the user can manually adjust the brightness from 0% to 100%.
*Setting the brightness to 100% always instead of selecting
the auto brightness control may shorten the life of the display.
Select HUD Settings

17 ■
Set the background image for booting.
When set to Auto, it changes according
to the date on the phone.
Select the fuel display information to display.
When selected, the fuel information is shown on the display.
According to the OBDⅡ information given, the fuel
information such as remaining fuel, possible distance to
drive, and coolant temperature are displayed.
* Remaining fuel and possible distance to drive are not supported
for some car models.
Select whether to auto start HUD.
When selected, HUD automatically turns on when the car starts.
* For HUD setting and navigation information, launch HUD
APP and enter the destination for navigation.
Select the unit of distance to be shown on HUD
Set the driving information to display.
When selected, selected driving information
are shown on the display.
According to the OBDⅡ information given, the driving
distance, driving time, and DPF information (for diesel
car) are displayed.

■ 18
HUD setting Default
Display angle 90 degree
Brightness Auto / Brightness “0”
Background image Auto
Unit of distance km/meter
HUD auto start Use
Fuel display Possible distance to drive
Driving information Driving
Battery charge rate Use
Average fuel efficiency Don’t use
Set whether to show the battery charge rate on the display.
When checked, the battery charge rate shows on the display.
* Battery voltage is displayed for non-IBS cars.
An arbitrary number is shown on the display i
nstead of the user information.
Set whether to use average fuel efficiency.
Shows the device connected to HUD.
Reset to factory default.

19 ■
7. Display
[With destination setting]
1. Navigation - Distance to the primary point
2. Remaining distance
5. Driving distance/driving time time
/DPF status
6. Gas (warning): Possible distance
to drive or remaining gas Coolant
temperature: -40 to 150
7. IBS car: Charge rate
non-IBS car: Battery voltage
9. Average fuel efficiency
8. Car speed
3. Estimated arrival time
4. Bluetooth connection
※ Driving distance, driving time and average fuel efficiency is for one trip. They are reset when
the engine is turned off and then restarted.
※ The average fuel efficiency after ignition is shown in km/L and appears over 1km is travelled
after ignition.
※ BAR icon appears when the distance remaining to the destination is less than 200m..
※ Information on display may vary depending on the car model.

■ 20
Display Description Default
1
Direction and distance to the primary point when the destination
has been set
* BAR icon appears when the distance remaining to the destination
is less than 200m.
2Remaining distance to the destination when the destination has
been set
3Estimated arrival time when the destination has been set
4Generated when HUD and MOTREX HUD APP are connected
5
Driving distance: Driving distance from 1 trip after ignition
Driving distance
Driving time: Time from 1 trip after ignition
DPF: Shows capturing or combusting (only for diesel cars)
*When combusting, it is helpful not to turn off the engine.
6
Gas icon: Shows fuel status
Gray: Enough
Yellow: Not enough
Flickering yellow: Almost empty
Gray (--): Remaining fuel/possible distance to drive not supported
* Possible distance to drive for electric cars is shown as ”--“.
* Remaining fuel for electric cars is shown as the remaining battery
in %.
Gas icon/Dis-
tance to empty
Coolant icon: Coolant temperature (-40 to 150)
* Not supported for electric cars; displayed as “--”
7
Battery charge rate or battery voltage
* Shown in yellow if the battery rate or voltage is low.
IBS car: Charge rate / Non-IBS car: Battery voltage
8Car speed
9
Average fuel efficiency
- When traveling less than 1km after ignition, it is shown as “--
km/L”
* Displayed as “--” for electric cars (not supported)
※ Change the usage option and values in MOTREX HUD APP.