Motus Millennium Series User manual

EN-1
Millennium Series
PROFESSIONAL StOPwAtch
User manual
ENGLISH

EN-2
Thanks for choosing the professional stopwatch
Motus Millennium Series with Lap and Split times
measurement with 1/1000 second precision.
To get the most out of your device read this manual
carefully and keep it on hand for later reference.
CONTENTS
MODES.................................................................... 3
BUTTONS................................................................. 4
TIME........................................................................ 5
ALARM.................................................................... 5
STOPWATCH............................................................ 6
CHRONO DATA........................................................ 7
COUNTDOWN ......................................................... 8
PACER ..................................................................... 9
BATTERY REPLACEMENT........................................ 10
CARE AND MAINTENANCE.................................... 11
WARRANTY ........................................................... 12

EN-3
MODES
Time
- Hour, minutes, seconds, date, day, month, year
- 12/24 hour format
Daily alarm
Stopwatch
- Lap and split times measurement
- 1/1000 second precision
- Pause function
- Total timing: 9 hours, 59 minutes, 59 seconds, 99
decimals
Chrono data
Recall Lap and Split times of current session
Fastest and slowest lap, average time, total time
Countdown
- Programmable from 1 second to 10 hours
- 1/1000 second precision
- Repeats count up to 9999
- Acoustic signal
Pacer
- Adjustable from 10 to 320 signals per minute
- Timing and count of signals

EN-4
BUTTONS
S1 - SPLIT
- Mark Lap and Split times
- Reset stopwatch
- Browse chrono data
S2 - MODE
- Browse functions in sequence:
Time > Alarm (AL) > Stopwatch > Countdown (TR)
> Pacer (Pace)
S3 - ST/SP
- Start/pause/stop stopwatch
- Browse chrono data
S4 - SET/RECALL
- Recall data of current session
- Enter settings mode
- Backlight display
S1 S3
S2
S4

EN-5
TIME
Press MODE button and enter Time mode.
Setting
- Press SET/RECALL button. The year digit ashes.
- Press ST/SP to increase the value or SPLIT to decrease it.
- Press SET/RECALL to conrm and set month.
- Press ST/SP to increase the value or SPLIT to decrease it.
- Press SET/RECALL to conrm and set the next data.
Follow the procedure described above to set date,
12/24 hours format, hour and minutes.
Press MODE button to conrm and exit setting mode.
ALARM
Press MODE button and enter Alarm mode (AL).
Setting
- Press SET/RECALL to enter setting mode. The hour
digit ashes.
- Press ST/SP to increase the value or SPLIT to decrease it.
- Press SET/RECALL to conrm and set minutes.
- Press ST/SP to increase the value or SPLIT to decrease it.
- Press SET/RECALL to conrm.
- Press ST/SP or SPLIT to activate (ON) or deactivate
(OFF) the alarm.
- Press SET/RECALL to conrm and exit setting mode.
The alarm will beep for some seconds; press one of the
buttons to turn it off.

EN-6
STOPWATCH
Press MODE button and enter Stopwatch mode.
- Press ST/SP to start the stopwatch.
- Press SPLIT to mark Lap/Split time.
The lower line shows the total elapsed time.
The middle line shows Split time and upper line shows
Lap time.
The upper-left number indicates the total number of
times marked.
- Press ST/SP to pause the stopwatch and press again
to restart it.
- Press ST/SP and SPLIT to reset the stopwatch.

EN-7
CHRONO DATA
Data can be recalled and viewed during timing.
Press SET/RECALL to view data in sequence:
Lap/Split > fastest lap (FS) > slowest lap (SL) > average
time (AV) > stopwatch
From Lap/Split data, press ST/SP or SPLIT button to
browse stored times.
The upper-left number indicated the progressive
number of times.
The upper line indicates Lap time, the middle line
indicates Split time.
The display will show current timing in stopwatch
mode if no buttons are pressed for some seconds.
Chrono data are automatically deleted when the
stopwatch is reset.

EN-8
COUNTDOWN
Press MODE button and enter countdown mode (TR).
Setting
- Press SET/RECALL to enter setting mode. Hour digit
ashes.
- Press ST/SP to increase the value or SPLIT to decrease
it.
- Press SET/RECALL button to conrm and set
minutes.
Follow the procedure described above to set minutes
and seconds.
- Press SET/RECALL button to conrm and exit setting
mode.
Start
- Press ST/SP to start the countdown.
The upper line shows time set, the middle line shows
remaining time, the lower line shows the repeats
count.
- Press ST/SP to pause and restart the countdown.
The device beeps when countdown reaches zero.
Press ST/SP and SPLIT to reset the stopwatch.

EN-9
PACER
Press MODE button and enter Pacer mode (PACE).
Setting
- Press SET/RECALL to enter setting mode.
- The pace digit ashes (e.g. F-10).
- Press SPLIT or ST/SP to change the digit.
- Press MODE button to conrm.
Start
- Press ST/SP to start the pacer.
The upper line shows elapsed time.
The middle line shows repeats count (C-).
The lower line shows the pace set (F-).
- Press ST/SP button to pause and restart the pacer.
- Press ST/SP and SPLIT to stop and reset the count.

EN-10
BATTERY REPLACEMENT
- Unscrew battery hatch by rotating it anticlockwise
with the help of a coin.
- Remove the exhausted battery and replace it with a
new one.
- Do not remove the rubber ring from its place.
- Reposition the battery hatch and screw it on by
rotating clockwise.
- Battery type: CR2032 (3V).
- Use battery type as indicated on this manual and
supplied with the device.
- Do not remove the rubber ring from its place.
- Do not dispose of batteries in regular household
waste.
- Batteries have to be properly disposed of according to
current local regulations.