Mount-It! MI-2291 User manual

LCD/LED/Plasma
Wall Mount Manual

Product Overview:
Key Features:
2
The articulating arm mount features a at prole of 3.4" from the wall to the back of your
display and a full extension of 19.1" from the wall as well as +/-15 degrees of tilt. The mount is
constructed with 23.3LBS of 100% High Grade Steel providing a sturdy and reliable mount.
The mount's solid wall plate allows for quick and easy installation and will support a wide
variety of stud applications up to 24" apart. The mount will t the majority of LCD, LED and
Plasma Displays up to 65”. Most LCD and Plasma displays 65” and smaller conforms to the
VESA Standards. However, this mount will support most odd sized hole patterns that do not
conform to the VESA Standards.
Covers Hole Patterns 26.9" Horizontal by 15.75" Vertical and Up to VESA 600x400mm
Extends to 19.1" and Collapses To Less Than 3.4" From The Wall
15° Up & Down Tilt
Built-in Bubble Level
Double Stud Installation
Installation Hardware Included

3
Part
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
Description
8x50mm Lag Bolts
S10x50mm Concrete Anchors
8mm Washer
8x15mm Plastic Spacer
M8 Plastic Spacers
6x13 Plastic Spacer
M5/M6/M8mm Lock Washer
M5/M6/M8 Washer
M4 12mm Screw
M4 25mm Screw
M5 12mm Screw
M5 25mm Screw
M6 12mm Screw
M6 25mm Screw
M8 12mm Screw
M8 25mm Screw
M6 Allen Wrench
Mount
Left Arm, Right Arm
Quantity
6
6
6
4
4
4
4/4/4
4/4/4
4
4
4
4
4
4
4
4
1
1
2
A B CD E FGH
IJK L M N OPQRS

Up To 26.9" Horizontal by 15.75"
Vertical or VESA 600x400mm
*Hole Pattern Coverage/Supported VESA Patterns:
Unit Weight:
Unit Materials:
Tilt Range:
Total Rotation:
Arm Extension/Collapsed:
Wall Plate Dimensions:
TV Plate Dimensions:
TV Arm Bracket Height:
Net: 23.3LBS Gross: 25.7LBS
Arms, Wall Plate and TV Plate:
100% High Grade Steel
±15°
130°
Fully Extended: 19.1"
Fully Collapsed: 3.4"
25.6x8.7"
28.7x8.3"
16.4"
4
29.9"X9.1"X3.7"
Shipping Dimensions:
Cable Management Opening: Two Square holes 3.9"X6.9"

Installaon instrucon:
Secon 1: Wood Stud Installaon:
2x4 Stud Wall
(16-24" Spacing)
Outlet located
next to stud
5
Note: Please read all installation instructions carefully before installation.
For standard wood stud installation please start at Section 1: Wood Stud Installation.
For Concrete/Mortar installations please refer to Section 2: Concrete/Masonry Installation.
1. Locating a Stud: First you will need to locate the stud in the wall you wish to mount your TV
to. If you know how to locate your stud please continue to Step 2. If you do not know how to
locate your stud please continue.
Finding a Wooden Stud in Your Home: One quick way to nd a wall stud is to nd a power
outlet on the wall. Wall outlets are normally located next to a stud. The easiest way to conrm
the location of a stud is with an electronic stud nder, which you can purchase at any
hardware store.
Once you nd an initial stud, other wall studs are
typically located in the wall every 16”. Please note in
some homes they are constructed with studs every
24". Additionally, many walls have “non-standard”
studs located next to doors, windows and replaces.
To get the best support for your mount, it is important
that you put the mounting screws for your wall plate
into the center of the wall stud. If it is difcult to
determine the exact center of the stud with your stud
nder, you can get the exact location of the stud
using a thin nail and hammer. With the hammer, pound the thin nail into the wall in the area of
the stud. If the nail is to the side of the stud it will go through the drywall and easily into the
empty space in the wall. If the nail is on the stud, once it goes through the drywall, it will not go
into the wall easily as it is hitting the wood of the stud. Keep repeating this process in the area
of the stud until you can tell exactly where the stud starts and ends. The middle of these two
points is the center of the stud.
2. Mark and Pre-Drill Installation Points: Once
you have located your studs, Mark the hole
locations where you intend to drill, assure that
they are level with one another. Use a 5mm drill bit
to pre-drill four holes to a depth of 2”. If you do not
have a metric drill bit a 3/16” drill bit will work as
well.

6
3. Attaching The Mount to Your Wall:
Once the four holes are pre-drilled, afx the
wall plate to the wall with all four lag bolts and
washers into the wall. The included plastic
anchors DO NOT need to be used for wood
stud installation.
Note on locating hardware to mount arms
to your display: If your display does not
come with the mounting screws in the back of
the display, check the original desk stand as in
some cases the same screws to hold the desk
stand are used also to mount your display. If
neither of these options work, the hardware
pack incl u de d w i th y o ur m o u nt c o nt a in s
several of the most common sized screws for
mounting your arm brackets to your display.
4. Installing Arm Brackets Onto The Back
of Yo ur D is pl ay : O nc e y o u l oc at e t h e
app ro pri a te sc r ews, a ttac h the t wo arm
brackets to the back of the display. To attach
the arms use the proper bolt and lock washer
for each of the four mounting holes. In the
event your display has recessed holes or a
curved back, your hardware pack includes
plastic spacers to ll the gaps. These plastic
s p a c e r s a r e n o t n e c e s s a r y f o r m o s t
installations.
5. Attaching Your Display to The Wall Plate: After
installing the wall plate and testing to ensure that it is
attached securely and attaching the arms to the back of
the display, it is time to attach your display to the wall. This
step may require two people, attach the hook to the top lip
of the wall plate. Once the hooks are securely set onto the
wall plate you can now let the bottom of the display rotate
back and it will simply hang on the mount.
6. Securing Your Display: The all mount utilizes a set
screw attached to the bottom of each one of the arm
brackets. To secure the arm bracket to the TV plate, locate
the set screw on the bottom of the arm then tighten in a
clockwise motion until tight. This screw ensures that your
display will not lift off of the mount.
Part A
Part C
TV
Tilt Knob
Safety Screw
D/E/FH
G
I/J/K/L/M/N/O/P

B
7
Revision date: 07/09/2016
7. Adjusting Your Tilt: To adjust the tilt position on your display you will need to loosen the
knob on the side of each one of the arm brackets, set the desired tilt and then tighten the arms
back up. You can loosen the screws slightly so that it will still hold while you adjust your tilt,
once you have set the desired angle of tilt you can then fully tighten the knobs.
Section 2: Concrete and Masonry Installation:
1. Mark Instal l a ti o n P oi n t s: O n c e y ou ha v e
selected the location you want the mount to be,
mark the exact location where the anchors and lag
bolts will be installed. Next, pre-drill the holes using
a masonry 10mm drill bit to a depth of 2” then insert
the supplied anchors. If you do not have a metric
drill bit a 3/8" drill bit will work.
Drilling Into Concrete: When drilling into concrete
or masonry, you have to use a special masonry drill
bit which you can purchase at your local hardware
store, using a standard drill bit will not penetrate the
concrete and it will just dull your drill bit. It is not
recommended to drill and mount into concrete block
or mortar joints. If mounting into concrete or
masonry we recommend using all of the supplied
plastic anchors and lag bolts for maximum support.
The supplied plastic anchors are rated for use up to
165LBS, but if you prefer you can go to your local
hardware store and purchase metal concrete
anchors.
2. Attaching The Mount to Your Wall:
Once the holes are pre-drilled and all plastic
anchors are inserted, affix the wall plate with the
four supplied lag bolts into the wall.
At this point you can proceed back to Step 4 in the wood stud
installation section to complete your Concrete/Masonry installation.
ATTENTION:
This mount must be installed using the supplied hardware with all lag bolts screwed into your
stud. If you are mounting into concrete or mortar, all four anchors and screws must be used for
maximum support.