Mount Plus 1095-31 User manual

1095-31 Wall Mount INSTALLATION INSTRUCTION
1. Technical Parameter
Max VESA:200×200; Maximum load: 44lbs.
2. Parts List
Please check the parts in the package in comparison with the following list,make sure all of
the parts are in the package. Never use defective parts, never replace part with different specification.
3. Installation and operation instructions
Note: please read the instructions carefully before installation!
STEP6
Step 4:
Install the monitor/TV to the front plate
with suitable screws selected from the
parts bag.
Step 3:
Install the adapter.
Step 1:
a.Use the wall plate as a
template to draw three holes.
b.Drill holes of dia 8mm and
60mm depth in the wall.
Step 5：
Install the wall plate.Screw the other
two self-tap screws into the holes.
Move the wall plate to keep it level
and tighten the self-tap screws.
Step 6:
Loosen the screws to adjust the angle
of monitor/TV 15° up and down,then
screw the screws firmly.
STEP2
B
A
B
WALL
3mm
ab
Step 2:
a.Wedge three plastic anchors
into the holes.
b. Screw one self-tap screw into
the middle plastic anchor,and
keep the screw away from wall
3mm.
STEP5
-15°
+15°
180°
WALL TV
TV
180°
180°
STEP4
STEP3
E/F
D
G
H
CA
STEP1
WALL WALL
ab
(A)M6x60 Self-tap Screw (3) (B)8x40 Plastic Anchor (3) (C)M6×15 washer (2)
(E)M6x14 screws(4) (F)M8x20 screws(4)
(D)5mm Plastic Sleeve (4)
(G)M6x12 screws(8) (H)M6 nut(8) (I) Level (1)
I

Full Motion TV Wall Mount
1095-31 Wall Mount