HUANUO HNCM5 User manual

Thank you for choosing this Huanuo product! At Huanuo we
strive to provide you with the best quality products and
services in the industry. Please share your experience of our
product with others at www.huanuoav.com/reviews if you
are satisfied. Should you have any issues, please don't
hesitate to contact us.
Technical Support:
1-800-556-0533 Mon-Fri 10am - 5pm (PST) (USA) (CAN)
Other Info:
[email protected] (US/CA/DE/UK/FR/IT/ES/AU)
Website:
www.huanuoav.com
Model:HNCM5
1
Monitor Stand
Instruction Manual

Supplied Parts and Hardware
X1
MAX:100
mm/4 in.
MAX:100
mm/4 in.
100 mm ≈ 4 in.
75 mm ≈ 3 in.
01 X1 02 X1 03
X1
04 X1
05
IMPORTANT SAFTY INSTRUCTIONS
Check the VESA Pattern of Monitor Before the Installation
Please carefully read all instructions before attempting installation. If you do
not understand the instructions or have any concerns or questions, please
contact our customer service at [email protected]
CAUTION: Avoid potential personal injuries and property damage!
Do not use this product for any purpose that is not explicitly specified in this
manual. Do not exceed weight capacity. We are not liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
Minimum VESA pattern:75mm/3 in.(W)x75mm/3 in.(H)
If your TV VESA is greater than 100x100 mm/4x4 in. or less than
VESA 75x75mm/3x3in., this mount is NOT compatible.
If this mount is NOT compatible, please contact customer service at
[email protected] to find a compatible mount.
Monitor Plate
Support Pillar Cable Clip Knob Grommet Plate
X1
06 X1 07
Monitor Connector Base
Tools Required [Not Included]
Drill(Optional)

Note: If there isn’t a hole on your desk, you
can use a 0.47 in.-1.18 in.(12 mm-30mm)
drill to drill a hole. The drill is NOT included.
Secure the Support Pillar [04] to the Base [03]
Step 1
(A) X3 (B) X1
M4x12mm
M-A X4
M4x16mm
M-B X4
M5x12mm
M-C X4
M5x16mm
M-D X4
D5
M-E X4 M-F X4
(C) X1
5/32 in.(4mm)
(D) X1
15/64 in.(6mm)
03
04
A
C
06
07
Bolt Bolt Allen Key Allen Key
Bolt Bolt Bolt Bolt Washer Spacer
Option A
Option B
Secure the support pillar [04] to the base [03] using bolts [A] and
Allen key [C]
Secure the support pillar [04] with base [03] to desktop using
grommet plate [07] and knob [06]
Dφ 3/8（10mm）

Step 2-1
Step 2-2
Secure Cable Clip [05] and Monitor Connector [02] in
Sequence to the Support Pillar [04]
Step 2
02
04
05
D
02
04
Slide the cable clip [05] and monitor connector [02] in sequence to
the support pillar [04].
Tighten monitor connector [02] to the support pillar [04] using
Allen key [D]

Attach the Monitor Plate to the Monitor
Step 4
Select Monitor Bolts
Step 3
M5M4
Only one bolt size fits your monitor.
Bolt length:Verify adequate thread engagement with bolts or bolts/spacers
combination.We recommend thread engagement by at least 5 turns.
-Too short will not hold the monitor.
-Too long will damage the monitor.
M-A/M-C
M-E
01
FLAT BACK MONITOR
(UNIVERSAL MONITOR PLATE)

Hang Monitor to the Stand and Secure with Bolt [B].
Step 5
M-B/M-D
M-E
M-F
ROUND BACK MONITOR
(UNIVERSAL MONITOR PLATE)
B
01
01
02
(If Needed)

Fix Tilt Angle of the Monitor
Step 6
Manage Cables
Step 7
D

360°
Store Allen Keys into the Cable Clip
Step 8
Features
D 15/64 in.(6mm)
C 5/32 in.(4mm)
180°
Tilt