Mounting Solutions SRD-600/12U User manual

Assembly Guide
SRD-600/U12
www.mnmounting.com
[email protected]om
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
Assembly Guide for Wide Rack Tower
SRD-600/12U

Assembly Guide
SRD-600/U12
www.mnmounting.com
[email protected]om
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
Assembly components:
1
Frame top SRD-600 - 1 pcs
2
3
5
4
Rack Pillar SRD-600 U12 - 4 pcs
Side panel U12 - 2 pcs
Frame bottom SRD-600 - 1 pcs
6
Cable channel U12 - 2 pcs
Vertical prole U12 - 4 pcs
7
8
9
10
Glass door U12 - 1 pcs
Blind door U12 - 1 pcs
Leg M10x30 - 4 pcs
Screw M6x16 DIN 912 - 16 pcs
1
2
3
4
5
6
7
8
9
11
Shelf - 2 pcs
10
11
Hex key 5 mm - 1 pcs
1
2

Assembly Guide
SRD-600/U12
www.mnmounting.com
[email protected]om
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
1. Start the assembly by installing
legs (
11
) into bottom frame (
2
).
Assembly Instructions:
1
2
3
3. Install the top frame (
1
) onto
pillars (
3
), without xing them with
screws.
1.1. Optional!!! Install a Wheels Set 50
instead of legs.
1.1
2. Install pillars (
3
) in the frame (
2
),
without xing them with screws.

Assembly Guide
SRD-600/U12
www.mnmounting.com
[email protected]om
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
5. Install Vertical proles (
7
) from
the inside frames.
5
4
4. Tighten the screws (
10
) of all
pillars (
3
).
7. Install the Shelfs (
9
).
67
6. Install Cable channels (
8
) from
the inside frames.

Assembly Guide
SRD-600/U12
www.mnmounting.com
[email protected]om
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
8. Install the doors (
5
and
6
). 9. Install the side panels (
4
).
SAFETY INSTRUCTIONS
1. Entrust mounting equipment only to experienced professionals and strictly follow the
providedv safety instructions. Improperly installed equipment may result in property damage,
personal injury and/or liability for the installing contractor.
2. Only use appropriate fastening hardware.
3. Always make sure to securely use and lock all mounting bolts. Loose bolts may become
unscrewed over time due to vibration which will then create a safety hazard.
8 9