Movo BPS3026 Operation instructions

BPS3026
LED Mirror Cabinet

Accessorize includes:
Typ
1
2
3
4
Number
4PCS
4PCS
2PCS
1PC
NameDraw
Thank you for purchasing this product. If you have any questions, please contact our customer service
department. We are always willing to help you.
Important Notices:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Fixtures provided are usually used for solid walls
If mount it on a tile, please use a ceramic drill and insert a wall plug
under the tile
Wall Types:
1.
2.
Mental screws
Mirror cabinet (with wire)
Door handles
Rubber plug screws
Tools needed:
Please make sure all parts are included. When taking all parts out, please put them on a soft surface
to prevent scratches.
As this product is made of stainless steel, the edges and corners are sharp, please protect yourself
from scratching during installation.
When working at height, please choose a safe platform to operate.
Please make sure there are no hidden cables or pipes before drilling.
Wear a pair of safety goggles when drilling.
Be careful when using power tools near water.
The product is manufactured according to Class I and the circuit needs to be grounded (see
wiring diagram).
The main power supply must be turned off before electrical installation.
If the power supply only needs two wires, it can be adjusted to an ungrounded circuit.
This product is only for indoor use.
Electrical components should not be in touch with the moisture.

Determine installation location
Please mark the hole location on the wall according to the hole spacing on the back of the wall cabinet.
Then, drilling the hole according to the mark location and install the glue plug screw into the holes. Please
install at least 3 screws or more to make sure the wall cabinet is stable.
Installation Steps:
1.
Install the cabinet
Align the back hole of the wall cabinet with the glue plug screw on the wall, then turn the metal
screw into the glue plug screw.
Note: When mounting to the wall, the wire
can not be pressed between the cabinet
and the wall, otherwise the wire installa-
tion will be affected.
2.
A
B B
BB
C
A
C
1
7
4PCS
1PC
24PCS
51PC
61PC
81PC
91PC
1
1
1
1

Install Plug
Please buy a suitable plug to connect the wire, one of which is ground wire. if you don't need it,
you can leave it alone, but please pay attention to the safety of using idle lines.
3.
Test
After the installation is completed, please test whether the LED light can be normally used. If not, please
check whether the plug wire is successfully installed. Lights up with short press means installation is
successful. If there is any problem, please contact the customer service.
4.
LIVE
Live-brown
Neutral-blue
EARTH
NEUTRAL
32PCS
Live supply-Red or brown Earth
supply-Green/yellow Neutral
supply-Black or blue
Earth Green & yellow