MstrWood Triangle User manual

Triangle User Instruction
What’s included:
Parts:
Tools and fixing:
880 mm
850 mm
710 mm
770 mm
NOTE: Ensure dowels
are poshed home in their
recesses before tightening
screws ‒ a gentle tap with
a small rubber mallet or the heel
of your hand should help.
For assembly, it is
recommended to use a
screwdriver or an electric
screwdriver.
NOTE: All our products can
be used outdoors only in dry
weather!
RECOMMENDATIONS:
● The climbing triangle
should be assembled
by a competent adult.
● Regular checks should
be carried out before and
during use to ensure safe
use the triangle.
● Watch your children
during games! Always be
vigilant during games!
We highly recommend using the triangle complete with a ramp or an arch.
It will provide maximum stability of the triangle.
Do contact us if you are unsure of the assambly instructions.
Triangle
fixing plates
Long leg pair
Short leg pair
Rungs
2х
2х
2х
13х
1. Lay the triangle fixing plates on the legs as shown in the pictures.
All the holes should line up and match.
2. Lay out the rungs according to the colors in the order you like.
Start assembly from the top rung.
3. Insert screws (6 pcs / 7 x 70) into the matching holes
of the triangle fixing plates, 3 pcs on each plate.
4. Firmly press the rung and tighten the screws. Leave about 1 cm open.
The most important thing: don’t twist parts completely!
The design should not be tightly fixed.
5. Firmly press other rungs to the legs and assembly the triangle
with other screws (20 pcs / 7 x 50).
Attention! We use natural materials only! Сlamping force must be
taken into account wood screw. Excessive force ightening the screw
will cause deformation wood surface.
6. When all the screws are in, place the triangle on a flat base and press
on it from above. The triangle will take the correct position. All details
will fall into place.
7. Tighten the screws fully, starting at the top rung and working down
to the base evenly on both sides.
8. The triangle is assembled.
Screws
(7 х 70)
6х
Screws
(7 х 50)
20х
Allen key
1хCAUTION
CONTAINS SMALL PARTS
Adult supervision required
MstrWood
The quality of the triangle
depends on the assembly
sequence.

Arch + Ramp User Instruction MstrWood
NOTE: All our products can
be used outdoors only
in dry weather!
RECOMMENDATIONS:
● The climbing set of arch
and ramp should be
assembled by
a competent adult.
● Regular checks should
be carried out before
and during use
to ensure safe use
the set.
● Watch your children
during games! Always
be vigilant during
games!
1. Lay the one arc and rungs according to the colors in the order
you like. Start assembly from the one of the top rung.
2. Insert screws (9 pcs / 7 x 70) into the matching holes of the arc.
3. Firmly press the rung and tighten the screws.
The most important thing: don’t twist parts completely!
The design should not be tightly fixed.
4. Firmly press other arc to the rungs and assembly the arch
with other screws (9 pcs / 7 x 70).
Attention! We use natural materials only! Сlamping force
must be taken into account wood screw.
Excessive force ightening the screw will cause deformation
wood surface.
5. When all the screws are in, place the arch on a flat base
and press on it from above. The arch will take the correct position.
All details will fall into place.
7. Tighten the screws fully, starting at the one of the top rung
and working to the base evenly on both arcs.
6. The arch is assembled.
What’s included:
Parts: Tools and fixing:
A Ramp with rocks or ladders does not need assembly
Screws
(7 х 70)
18х
Allen key
1х
2х Arcs
9х Rungs
CAUTION
CONTAINS SMALL PARTS
Adult supervision required
NOTE: Ensure dowels
are poshed home in their
recesses before tightening
screws ‒ a gentle tap with
a small rubber mallet or the heel
of your hand should help.
For assembly, it is
recommended to use a
screwdriver or an electric
screwdriver.