MTD Bolens 11A-414A065 Guide

Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Lea el manual de operación anexo sobre ensamblaje e inicio.
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578) 778-11649
11A-414
1
2
Use cable tie to
secure cable to
lower handle.
4
3
Starter
Rope
Refer to Operator’s Manual for instructions on attaching the grass catcher.
© 2008
Star Knobs
Blade Control Handle
A
B
(A) Lift handle
to extended
position.
(B) Tighten star
knobs.
(A) Hold blade
control handle
against upper
handle.
(B)(C) Slowly
pull starter rope
from engine and
slip starter rope
into rope guide.
(D) Tighten
rope guide wing
knob.
Place ends of lower
handle onto handle
brackets. Insert
carriage bolts and
tighten with wing nuts.
A
C
D
B

Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Lea el manual de operación anexo sobre ensamblaje e inicio.
Need Help?
Call 1-888-TO-HELP-U
Lea el manual de operación anexo sobre ensamblaje e inicio.
Fill tank with
gas up to within
1/2-inch of top
of tank. Do not
overll.
Fill engine with
entire contents of
oil bottle supplied.
Do not overll.
5
6
Push primer
ve times.
7
Gas Cap
Oil Fill
Primer
Depress blade control handle and hold.
8
Pull starter rope with quick, full arm stroke. If engine
does not start after ve pulls, repeat steps 7 through 9.
9