
Warning: Because mounting surface materials can vary widely, it is imperative that you make sure mounting surface is strong enough to handle mounted product and equipment.
Safety
WARNING
DO NOT place hands on or near support bars.
Pinch points are created during lifting and
lowering the worksurface. Failure to follow these
instructions may result in serious personal injury.
Caution:
In order to avoid the potential of
the pinch cable it is important to
follow the instructions of the
cable wiring.
In this manual. If you do not
follow these instructions, may
cause damage to equipment or
personal injury.
Caution:
Keep the display and notebook
computer base fully reflects the
working table space. Make the
base of any part or stand
Hanging edge may cause
property damage or personal
injury.
Caution:
Leave enough slack in cable
to allow for full range of
vertical motion . Failure to
heed this warning may
result in property damage
and or personal injury.
Caution:
Raise worksurface slowly.
Raising worksurface too fast
may create an unstable situation
resulting in property damage
and or personal injury.
Warning: impact hazard! Moving
parts can be squeezed and cut.
Lift up the desk and lift the product to
its top position.
Need two people to lift this product
away from desk.
Do not tip the product side or upside
down. The product must always
remain upright.
Please pay attention to these warn-
ings, may lead to unexpected move-
ments of the lifting mechanism may
result in serious personal injury and
prope
Warning: impact hazard! On
the working surface under tension,
moving parts can be squeezed and
cut.
To improve the vertical adjustment
of the working table top the removal
equipment.
Not paying attention to this warning
can lead to serious personal injury
and property damage!
AB
123
3
A
A
B
Caution:
Leave enough slack in cable to allow for full range of
vertical motion . Failure to
heed this warning may result in property damage and or
personal injury.
Ø12