Multimo A 214 PARETE LETTO T User manual

Assembly Instructions
70min.
180min.
Technical Service
End User
+-
A 214 PARETE LETTO T

OT-054
2/ piece
Page 1 Page 2
DD - 01 ( R12 )
3 / piece
VD - 01(6X70) mm
3 / piece
DSE - 01 (40x90x32) mm
3 / piece
MNG - 01
42 / piece
IM - 01 (6x30) mm
4 / piece
CT - 01 ( 6x40 ) mm
6 / piece
VTB - 01 (4,8x16) mm
12 / piece
VDA - 01 ( 6,5x50 ) mm
6 / piece
VD - 03 ( 3,5x18 ) mm
8 / piece
VD - 02 (3,5x25) mm
24 / piece
AF - 01
4 / piece
BO - 01
2 / piece
PL - 01 (6x19x2) mm
4 / piece
AL - 01
4
AL - 02
5
PM - 01
16 / piece
Accessories List
42 / piece
MNX 02
H 01
3 / piece
4 / piece
STP - 01
KOR 01
1 / piece
KLF 01 (fabric cover)
1 / piece
MKZ - 02
2 / piece 350N
R L
TAP - 01
42 / piece
SC - 32
2 / piece
KLT 01
1 / piece
SN - 01 ( M6 )
4 / piece
CT - 02 ( 6x30 ) mm
2 / piece
PL - 02 (8x22x2) mm
3 / piece
TTC 01
4 / piece
SG - 01
2 / piece
KP - 01 ( 224 ) mm
1 / piece
VKP - 01 (22) mm
2 / piece
KVL 01
64 / piece
Piece T hickness Length Width Piece T hick Height Most
A1,18 89,76 17,32 230 2280 440
B1,18 77,01 16,54 130 1956 420
C0,71 77,01 16,54 118 1956 420
D0,71 77,01 16,54 118 1956 420
E0,71 40,47 13,15 318 1028 334
F0,71 77,01 5,31 118 1956 135
G0,71 46,69 4,72 318 1186 120
H0,71 25,59 4,65 418 650 118
K0,71 11,81 12,99 418 300 330
L0,71 32,28 7,68 218 820 195
M0,71 7,87 7,87 418 200 200
N0,71 75,98 40,94 118 1930 1040
P0,71 38,82 38,78 118 986 985
R0,71 38,82 38,78 118 986 985
S0,31 89,41 19,37 482271 492
T0,71 75,75 17,72 118 1924 450
Track Title (inch) (mm)
BU - 01
2 / piece

OT-054
2/ piece
Page 1 Page 2
DD - 01 ( R12 )
3 / piece
VD - 01(6X70) mm
3 / piece
DSE - 01 (40x90x32) mm
3 / piece
MNG - 01
42 / piece
IM - 01 (6x30) mm
4 / piece
CT - 01 ( 6x40 ) mm
6 / piece
VTB - 01 (4,8x16) mm
12 / piece
VDA - 01 ( 6,5x50 ) mm
6 / piece
VD - 03 ( 3,5x18 ) mm
8 / piece
VD - 02 (3,5x25) mm
24 / piece
AF - 01
4 / piece
BO - 01
2 / piece
PL - 01 (6x19x2) mm
4 / piece
AL - 01
4
AL - 02
5
PM - 01
16 / piece
Accessories List
42 / piece
MNX 02
H 01
3 / piece
4 / piece
STP - 01
KOR 01
1 / piece
KLF 01 (fabric cover)
1 / piece
MKZ - 02
2 / piece 350N
R L
TAP - 01
42 / piece
SC - 32
2 / piece
KLT 01
1 / piece
SN - 01 ( M6 )
4 / piece
CT - 02 ( 6x30 ) mm
2 / piece
PL - 02 (8x22x2) mm
3 / piece
TTC 01
4 / piece
SG - 01
2 / piece
KP - 01 ( 224 ) mm
1 / piece
VKP - 01 (22) mm
2 / piece
KVL 01
64 / piece
Piece T hickness Length Width Piece T hick Height Most
A1,18 89,76 17,32 230 2280 440
B1,18 77,01 16,54 130 1956 420
C0,71 77,01 16,54 118 1956 420
D0,71 77,01 16,54 118 1956 420
E0,71 40,47 13,15 318 1028 334
F0,71 77,01 5,31 118 1956 135
G0,71 46,69 4,72 318 1186 120
H0,71 25,59 4,65 418 650 118
K0,71 11,81 12,99 418 300 330
L0,71 32,28 7,68 218 820 195
M0,71 7,87 7,87 418 200 200
N0,71 75,98 40,94 118 1930 1040
P0,71 38,82 38,78 118 986 985
R0,71 38,82 38,78 118 986 985
S0,31 89,41 19,37 482271 492
T0,71 75,75 17,72 118 1924 450
Track Title (inch) (mm)
BU - 01
2 / piece

Page 3 Page 4
STEP 1
MNX - 02
KVL 01
A-L/A-R
B
C
F
A-L
G H
A-R
B
C
D
E
E
E
F
G
G
H
H
H
K
K
K
K
L
L
M
M
M
M
N
P
R
T
S
S S
S

Page 3 Page 4
STEP 1
MNX - 02
KVL 01
A-L/A-R
B
C
F
A-L
G H
A-R
B
C
D
E
E
E
F
G
G
H
H
H
K
K
K
K
L
L
M
M
M
M
N
P
R
T
S
S S
S

Page 5 Page 6
STEP 3
D (BACK FACE)
C
F
210°
MNX - 02
KVL 01
STEP 2
STEP 5
MNG - 01
D (FRONT FACE)
x4
A-R
CF
210°
x2
G
210°
x3
STEP 4
x8
x12 G
G
MNG - 01

Page 5 Page 6
STEP 3
D (BACK FACE)
C
F
210°
MNX - 02
KVL 01
STEP 2
STEP 5
MNG - 01
D (FRONT FACE)
x4
A-R
CF
210°
x2
G
210°
x3
STEP 4
x8
x12 G
G
MNG - 01

Page 7 Page 8
E
E
E
VD - 02
STEP 8
STEP 9
A-L
MNG - 01
D
x5
STEP 6
STEP 7
210°
210°
x6
MNG - 01
x6
x 24
B
210°
x2
S
S
S S
H 01

Page 7 Page 8
E
E
E
VD - 02
STEP 8
STEP 9
A-L
MNG - 01
D
x5
STEP 6
STEP 7
210°
210°
x6
MNG - 01
x6
x 24
B
210°
x2
S
S
S S
H 01

Page 9 Page 10
PM - 01
STEP 10
AF - 01
BO - 01
VD - 03
OT-054
CT - 01
AL - 01
x16
STEP 11
AL - 01
CT - 02 BU - 01
IM - 01
AL - 02
CAUTION
DO NOT UNLOCK BEFORE INSTALL
MKZ - 02 (L/R)

Page 9 Page 10
PM - 01
STEP 10
AF - 01
BO - 01
VD - 03
OT-054
CT - 01
AL - 01
x16
STEP 11
AL - 01
CT - 02 BU - 01
IM - 01
AL - 02
CAUTION
DO NOT UNLOCK BEFORE INSTALL
MKZ - 02 (L/R)

Page 11 Page 12
STEP 13
45-50
STEP 12 Ø 10 mm / 0,254 inch
DD - 01
VD - 01
DSE - 01
VTB - 01
PL - 02
TAP - 01

Page 11 Page 12
STEP 13
45-50
STEP 12 Ø 10 mm / 0,254 inch
DD - 01
VD - 01
DSE - 01
VTB - 01
PL - 02
TAP - 01

Page 13 Page 14
SN - 01
PL - 01
CT - 01
AL - 01
SG - 01
AL - 02
STEP 14
AL - 02
STEP 15
TKOR 01

Page 13 Page 14
SN - 01
PL - 01
CT - 01
AL - 01
SG - 01
AL - 02
STEP 14
AL - 02
STEP 15
TKOR 01

Page 15 Page 16
STEP 17
STEP 18
MNG - 01
VDA - 01
AL - 02
M
L
R
210°
x4
x6
STEP 16
KLF 01 (fabric cover)
CAUTION !
BE SURE THE HEADBOARD
IS IN CLOSED POSITION
WHEN BED BOX IS CLOSED
M
M
L
M
M
L
M
TTC 01

Page 15 Page 16
STEP 17
STEP 18
MNG - 01
VDA - 01
AL - 02
M
L
R
210°
x4
x6
STEP 16
KLF 01 (fabric cover)
CAUTION !
BE SURE THE HEADBOARD
IS IN CLOSED POSITION
WHEN BED BOX IS CLOSED
M
M
L
M
M
L
M
TTC 01

Page 15 Page 16
STEP 19
P
R
x2
ATTENTION / HOW TO / READ ME / OWNER'S GUIDE
1. Mounting of furniture must be to walls made of brick, concrete or similar strong
material. Wood or metal stud mounting is also acceptable. Paper-mache and sheet rock like
walls are not suitable. Do not mount furniture to paper-mache or sheet rock like material as
improper mounting may cause injury to person(s) and damage to property.
2. For safety and product longevity you must periodically inspect the mounting and
mechanical connections for integrity and tightness. Confirm hardware remains properly
affixed and connections snug.
3. Wall Bed mattress thickness may not exceed 8 inch. Take care to remove pillows and
excess blankets before closing. Doing so keeps mechanism free of obstruction and
unnecessary stress.
4. Do not lean or rest heavy objects on side or top of furniture. This may cause balance issues
and compromise the integrity of your mounting connections.
5. Please use the furniture's beds, desks and shelving as intended. Not designed to be sat,
stood, leaned, jumped (etc) on. Improper use may cause personal injury and damage to
property.
6. With seasonal humidity change you must inspect interior and exterior of furniture.
7. Single, Twin, Twin XL beds accommodate the weight of one person. Improperly sleeping
more than one person risks injury to person and damage to property.
8. Before any un-mounting or disassembly please contact Multimo for technical support and
instruction. Failure to properly detach risks injury to person and damage to property.
9. For Bunk Beds:
a. Always use provided ladder when accessing top bunk.
b. Be slow, careful and aware of surroundings when opening top bunk.
c. Do not horseplay. Beds are to be slept on only.
d. Some have legs that fully extend when open- be aware of where the leg is and will be.
P/R
wheels are fixed
on (P1x2/R2x2)

Page 15 Page 16
STEP 19
P
R
x2
ATTENTION / HOW TO / READ ME / OWNER'S GUIDE
1. Mounting of furniture must be to walls made of brick, concrete or similar strong
material. Wood or metal stud mounting is also acceptable. Paper-mache and sheet rock like
walls are not suitable. Do not mount furniture to paper-mache or sheet rock like material as
improper mounting may cause injury to person(s) and damage to property.
2. For safety and product longevity you must periodically inspect the mounting and
mechanical connections for integrity and tightness. Confirm hardware remains properly
affixed and connections snug.
3. Wall Bed mattress thickness may not exceed 8 inch. Take care to remove pillows and
excess blankets before closing. Doing so keeps mechanism free of obstruction and
unnecessary stress.
4. Do not lean or rest heavy objects on side or top of furniture. This may cause balance issues
and compromise the integrity of your mounting connections.
5. Please use the furniture's beds, desks and shelving as intended. Not designed to be sat,
stood, leaned, jumped (etc) on. Improper use may cause personal injury and damage to
property.
6. With seasonal humidity change you must inspect interior and exterior of furniture.
7. Single, Twin, Twin XL beds accommodate the weight of one person. Improperly sleeping
more than one person risks injury to person and damage to property.
8. Before any un-mounting or disassembly please contact Multimo for technical support and
instruction. Failure to properly detach risks injury to person and damage to property.
9. For Bunk Beds:
a. Always use provided ladder when accessing top bunk.
b. Be slow, careful and aware of surroundings when opening top bunk.
c. Do not horseplay. Beds are to be slept on only.
d. Some have legs that fully extend when open- be aware of where the leg is and will be.
P/R
wheels are fixed
on (P1x2/R2x2)

www.multimobeds.com