Multimo SPAZIO A 202 User manual

Assembly Instructions
VIDEO
link
+-
45 min.
Technical Service
100 min.
End User
A 202- SPAZIO

Page 1 Page 2
MNG - 01
18 / piece
KP - 01 ( 224 ) mm
1 / piece
VKP - 01 (22) mm
2 / piece
DD - 01 ( R10 )
2 / piece
VD - 01(6X70) mm
2 / piece
DSE - 02
2 / piece
VD - 03 ( 3,5x18 ) mm
6 / piece
Accessories List
MNX 02
18 / piece
TTC 01
4 / piece
SC-61
2 / piece
KVL 01
52/ piece
MKZ - 02
1 / piece 1000N
R L
OT-054
2 / piece
TAP - 01
18 / piece
AL - 01 (4MM)
1 / piece
AL - 02 (5MM)
1 / piece
AVT - 01
10 / piece
H 01
3 / piece
VD - 02 (3,5x25) mm
16 / piece
Pie c e T h ic k n e s s L e n g t h W id t h Pie c e T h ic k H e i g h t M o s t
A11, 18 79,45 17, 40 1 30 2018 442
B10, 71 77, 01 16, 54 1 18 1956 420
C10, 71 77, 01 5, 31 1 18 1956 135
D21, 18 63, 15 17, 32 2 30 1604 440
E40, 31 63, 07 19, 33 4 8 1602 491
F10, 71 75, 98 56, 89 1 18 1930 1445
H10, 71 62, 44 4, 72 1 18 1586 120
H-R / H-L 20, 71 62, 44 4, 72 2 18 1586 120
J60, 71 25, 59 4, 65 6 18 650 118
Tra ck T it le
(inch)
(m m )
IM - 01 (6x30) mm
4 / piece
CT - 01 ( 6x40 ) mm
2 / piece
VTB - 02 (4,2x16) mm
8 / piece 1 / piece
KMT-01 KKS - 01
2 / piece
A
B
C
D-R
D-L
E
E
E
E
F
H-L
H
H-R
J
J
J
J J
J
KBP - 01
2 / piece
KLF 02 (fabric cover)
1 / piece
KOR 02
1 / piece
YSB - 02 ( 4x20 ) mm
4 / piece

Page 1 Page 2
MNG - 01
18 / piece
KP - 01 ( 224 ) mm
1 / piece
VKP - 01 (22) mm
2 / piece
DD - 01 ( R10 )
2 / piece
VD - 01(6X70) mm
2 / piece
DSE - 02
2 / piece
VD - 03 ( 3,5x18 ) mm
6 / piece
Accessories List
MNX 02
18 / piece
TTC 01
4 / piece
SC-61
2 / piece
KVL 01
52/ piece
MKZ - 02
1 / piece 1000N
R L
OT-054
2 / piece
TAP - 01
18 / piece
AL - 01 (4MM)
1 / piece
AL - 02 (5MM)
1 / piece
AVT - 01
10 / piece
H 01
3 / piece
VD - 02 (3,5x25) mm
16 / piece
Pie c e T h ic k n e s s L e n g t h W i d t h Pie c e T h i ck H e i g h t M o s t
A11, 18 79, 45 17, 40 1 30 2018 442
B10, 71 77, 01 16, 54 1 18 1956 420
C10, 71 77, 01 5, 31 1 18 1956 135
D21, 18 63, 15 17, 32 2 30 1604 440
E40, 31 63, 07 19, 33 4 8 1602 491
F10, 71 75, 98 56, 89 1 18 1930 1445
H10, 71 62, 44 4, 72 1 18 1586 120
H-R / H-L 20, 71 62, 44 4, 72 2 18 1586 120
J60, 71 25, 59 4, 65 6 18 650 118
Tra ck T it le
(inch)
(m m )
IM - 01 (6x30) mm
4 / piece
CT - 01 ( 6x40 ) mm
2 / piece
VTB - 02 (4,2x16) mm
8 / piece 1 / piece
KMT-01 KKS - 01
2 / piece
A
B
C
D-R
D-L
E
E
E
E
F
H-L
H
H-R
J
J
J
J J
J
KBP - 01
2 / piece
KLF 02 (fabric cover)
1 / piece
KOR 02
1 / piece
YSB - 02 ( 4x20 ) mm
4 / piece

Page 3 Page 4
MNG - 01
STEP 2
210°
210°
C
D-R
B C
B
MNG - 01 x 4
VIDEO
link
MNG - 01 x 2
VIDEO
link
STEP 1
A
MNX - 02
KVL 01
B
KVL-01 x 8
MNX-02 x 7
MNX-02 x 3
C
KVL-01 x 4
MNX-02 x 4
D-L / D-R
MNX-02 x 2
KVL-01 x 2
KVL-01 x 4
H
MNG - 01
STEP 3

Page 3 Page 4
MNG - 01
STEP 2
210°
210°
C
D-R
B C
B
MNG - 01 x 4
VIDEO
link
MNG - 01 x 2
VIDEO
link
STEP 1
A
MNX - 02
KVL 01
B
KVL-01 x 8
MNX-02 x 7
MNX-02 x 3
C
KVL-01 x 4
MNX-02 x 4
D-L / D-R
MNX-02 x 2
KVL-01 x 2
KVL-01 x 4
H
MNG - 01
STEP 3

Page 5 Page 6
STEP 4
MNG - 01
STEP 5
STEP 6
STEP 7
MNG - 01
210°
210°
210°
D-L
H
H-R
H-L
A
VIDEO
link
VIDEO
link
MNG - 01 x 2
MNG - 01 x 3
MNG - 01 x 4
E
E
EE
H 01
MNG - 01

Page 5 Page 6
STEP 4
MNG - 01
STEP 5
STEP 6
STEP 7
MNG - 01
210°
210°
210°
D-L
H
H-R
H-L
A
VIDEO
link
VIDEO
link
MNG - 01 x 2
MNG - 01 x 3
MNG - 01 x 4
E
E
EE
H 01
MNG - 01

Page 7 Page 8
J
J
STEP 9
STEP 8
VIDEO
link
VIDEO
link
KVL 01
KVL - 01 x 4
J
J
J
J
J
J
J
J
J
OT - 054
CT - 01
AL - 01
VD - 02 X 5
AVT - 01X 5
VD - 02 x 6
VD - 02 X 5
AVT - 01X 5
STEP 10
MKZ - 02 (L/R)
IM - 01
AL - 02
CAUTION
DO NOT UNLOCK BEFORE INSTALL

Page 7 Page 8
J
J
STEP 9
STEP 8
VIDEO
link
VIDEO
link
KVL 01
KVL - 01 x 4
J
J
J
J
J
J
J
J
J
OT - 054
CT - 01
AL - 01
VD - 02 X 5
AVT - 01X 5
VD - 02 x 6
VD - 02 X 5
AVT - 01X 5
STEP 10
MKZ - 02 (L/R)
IM - 01
AL - 02
CAUTION
DO NOT UNLOCK BEFORE INSTALL

Page 9 Page 10
VIDEO
link
Ø 10 mm / 0,254 inch
VD - 01
STEP 11
DSE - 02
TAP - 01
DD - 01
VD - 03
ATTENTION!!!
Must be secured to the wall made of brick, concrete or similarly strong material.
Mounting to wooden or metal studs is also acceptable.
Do not mount directly to sheetrock or paper-mache type walls not supported by studs.
WALLS MADE OF DRYWALL WITH WOODEN OR METAL STUDS
FİRST LOCATE THE STUDS BY USİNG ''STUD
FİNDER'' İN THE WALL AND DRİLL İT
ACCORDİNG TO THE HEİGHT MEASURMENTS
GİVEN ON THE SİDE.
UPPER HOLES SHOULD BE DRİLLED
FOR ATTACHİNG BED AT NEXT STEP.
SUPPLY DRYWALL FASTENERS APPROPPRIATE
TO YOUR WALL TYPE. WE RECOMMEND
USING STEEL TOGGLE BOLT ANCHOR THAT
SHOWN BELOW
NOT INCLUDED
Ø 10 mm / 0,254 inc
STEP 11-1
VD - 03
DSE - 02 x 2
VD - 01
DSE - 02
DD - 01
DSE - 02 x 2
TAP - 01

Page 9 Page 10
VIDEO
link
Ø 10 mm / 0,254 inch
VD - 01
STEP 11
DSE - 02
TAP - 01
DD - 01
VD - 03
ATTENTION!!!
Must be secured to the wall made of brick, concrete or similarly strong material.
Mounting to wooden or metal studs is also acceptable.
Do not mount directly to sheetrock or paper-mache type walls not supported by studs.
WALLS MADE OF DRYWALL WITH WOODEN OR METAL STUDS
FİRST LOCATE THE STUDS BY USİNG ''STUD
FİNDER'' İN THE WALL AND DRİLL İT
ACCORDİNG TO THE HEİGHT MEASURMENTS
GİVEN ON THE SİDE.
UPPER HOLES SHOULD BE DRİLLED
FOR ATTACHİNG BED AT NEXT STEP.
SUPPLY DRYWALL FASTENERS APPROPPRIATE
TO YOUR WALL TYPE. WE RECOMMEND
USING STEEL TOGGLE BOLT ANCHOR THAT
SHOWN BELOW
NOT INCLUDED
Ø 10 mm / 0,254 inc
STEP 11-1
VD - 03
DSE - 02 x 2
VD - 01
DSE - 02
DD - 01
DSE - 02 x 2
TAP - 01

Page 11 Page 12
STEP 13
VKP - 01 X 2
KP - 01
SC-61
VIDEO
link
STEP 12
VIDEO
link
45-50
LET THE STOPPER LOCK MOVE DOWN !!!
VTB - 02 X 4
KMT - 01
KMT - 01
KKS - 01 X 2

Page 11 Page 12
STEP 13
VKP - 01 X 2
KP - 01
SC-61
VIDEO
link
STEP 12
VIDEO
link
45-50
LET THE STOPPER LOCK MOVE DOWN !!!
VTB - 02 X 4
KMT - 01
KMT - 01
KKS - 01 X 2

Page 13 Page 14
STEP 14
VIDEO
link
ATTENTION / HOW TO / READ ME / OWNER'S GUIDE
1. Wall beds must be securely attached to the wall. Hardware for mounting to
concrete, brick or similar strong material is included.
2. When mounting to drywall, wall beds must be attached to wooden or metal
studs in 2 or 3 points. Do not mount wall beds directly to drywall or paper-
mache type wall without properly attaching it to studs. Please choose
appropriate fasteners for the type of wall the bed will be mounted on.
Drywall mounting hardware is not included.
3. For safety and product longevity you must periodically inspect the integrity
and tightness of the mounting and mechanical connections. Confirm
hardware remains properly affixed and connections are snug.
4. Do not lean or rest heavy objects on sides or top of furniture. This may cause
balance issues and compromise the integrity of your mounting connections.
5. Please use wall beds and integrated shelves, desks and sofas as intended.
Do not jump and/or exceed supported weight limits. Do not sit or lean on
integrated shelves and desks. Improper use may cause personal injury and
damage to property.
6. With seasonal humidity change please inspect the interior and exterior of the
furniture for deformation and/or discoloration.
7. Before any un-mounting or disassembly please contact Multimo Beds for
technical support and instructions. Failure to properly detach may result in
personal injury and damage to property.
KBP - 01
KOR 02
KBP - 01
KBP - 01
YSB - 02 X 2
KOR 02
KLF 02
(fabric cover)
CAUTION !
MAKE SURE THAT HEADBOARDS
AND GUARDRAILS ARE FOLDED
BEFORE CLOSING THE BED
TTC 01 X 2
TTC 01 X 2

Page 13 Page 14
STEP 14
VIDEO
link
ATTENTION / HOW TO / READ ME / OWNER'S GUIDE
1. Wall beds must be securely attached to the wall. Hardware for mounting to
concrete, brick or similar strong material is included.
2. When mounting to drywall, wall beds must be attached to wooden or metal
studs in 2 or 3 points. Do not mount wall beds directly to drywall or paper-
mache type wall without properly attaching it to studs. Please choose
appropriate fasteners for the type of wall the bed will be mounted on.
Drywall mounting hardware is not included.
3. For safety and product longevity you must periodically inspect the integrity
and tightness of the mounting and mechanical connections. Confirm
hardware remains properly affixed and connections are snug.
4. Do not lean or rest heavy objects on sides or top of furniture. This may cause
balance issues and compromise the integrity of your mounting connections.
5. Please use wall beds and integrated shelves, desks and sofas as intended.
Do not jump and/or exceed supported weight limits. Do not sit or lean on
integrated shelves and desks. Improper use may cause personal injury and
damage to property.
6. With seasonal humidity change please inspect the interior and exterior of the
furniture for deformation and/or discoloration.
7. Before any un-mounting or disassembly please contact Multimo Beds for
technical support and instructions. Failure to properly detach may result in
personal injury and damage to property.
KBP - 01
KOR 02
KBP - 01
KBP - 01
YSB - 02 X 2
KOR 02
KLF 02
(fabric cover)
CAUTION !
MAKE SURE THAT HEADBOARDS
AND GUARDRAILS ARE FOLDED
BEFORE CLOSING THE BED
TTC 01 X 2
TTC 01 X 2

www.multmobeds.com