Multipipe 22-00003 User guide

WIRELESS RF
PROGRAMMABLE
THERMOSTAT
(SMART COMPATIBLE)
Model: 22-00003
INSTALLER MANUAL
Multipipe Ltd
Unit 12 Great Hayes Business Park
Lower Burnham Road
Stow Maries
Chelmsford, Essex, CM3 6SQ
Sales
T: 01245 227630
E: [email protected].uk
Technical
T: 01245 850799
E: [email protected].uk
www.multipipe.co.uk
Introduction
Power Up and button function
Pairing with the Wiring Center - oine
Device identication
Setting the schedule
Pairing with the Wiring Center - online
Setting date and time
Pairing with the TRV- oine
Pairing with the boiler receiver RX1/RX2
Product Compliance
Safety Information
22-00003 is a stylish and accurate programmable room thermostat. You can now simply adjust your home
temperature as desired in order to create a comfortable home environment.
When pairing the thermostats with theWiring Center you can assign a group to a programmable thermostat.
This will allow control of up to 11 group thermostats.There can be maximum 2 groups perWiring Center.
Tap Scan for equipment to add your
thermostat.
Make sure yourTRV is in pairing mode. Please check TRV manual for full process. Max 6TRVs!
Make sure your receiver is in pairing mode. Please check receiver manual for full process.
This product complies with the essential requirements and other relevant provisions of Directives 2014/53/EU
(RED) and 2011/65/EU. 2405-2480MHz; <14dBm
Use in accordance with the regulations. Indoor use only. Keep your device completely dry. Disconnect your
device before cleaning it with a dry cloth.
1 2 3
Button Fuction
Mode selection.
Long press to return home without saving.
Short press to return to previous screen.
Decrease or increase SetpointTemperature.
Increase or decrease Day, Clock.
OK key. Short press to conrm selection.
Long press to save and return home.
Long press to enter Program/Clock/Oset
5 sec
5 sec
5 sec
OR
OR
OR
5 sec
5 sec
5 sec
ufh us e
1
7
4
2
5
3
6
Note: You cannot add two thermostats to the same zone.
If you are trying to do this, the following error will be displayed.
1
4
7
2
5
3
6
Follow the same steps
to set up the date
Use right and left keys to select the day of the programs.
5/2 days - 12 schedules
7 days - 6 schedules
24 h - 42 schedules
3 Sec 3 Sec
12 3 4
3 Sec
1
4
7
2
5
89
3
6
3 Sec
1 2 3
1 2
3
5
6
4
7
Select the wiring centre number
with or (max 9). Conrm
your choice by .
Select the group number
with or .
Conrm your choice by .
Insert batteries to boot up
Select the zone number
with or .
Conrm your choice by .
Wait for theTRVs.You can connect
up to 6TRVs to one thermostat.
5 Sec
5 Sec
1
4
7
2
5
8
3
6
For pairing with RX2, set
the internal switch of the
receiver to RX2 and choose
at step 4. After
that, follow the same
procedure as described
above.

8
10
12
9
11
13
When pairing the thermostats with the Wiring Center you can assign a group to a programmable
thermostat. This will allow control of up to 11 group thermostats. There can be maximum 2 groups per
Wiring Center. Please follow the on screen instruction in order to complete the pairing process.
Please follow the on screen instruction in order to complete the pairing process. After that continue by
associating the TRV(s) to the thermostat(s) (mandatory). Max 6TRVs!
To identify your devices, tap the icon on the app screen. The LED (or screen) on the enquired device
will flash.
Pairing with the TRV - online
Pairing with the boiler receiver RX1/RX2 - online
Device identication
Setting the schedule
Factory Reset
Tap Scan for equipment to add your
thermostat.
1 2
3
5
4
Make sure the TRV is in pairing mode.
Make sure your receiver is in pairing mode. Please check receiver manual for full process.
6
9
8
7
10
1211
13
1 2 3
4
Note: The TRV LED will ash orange until the association
process is complete. Once this action has nished the LED
will go o.
Tap Scan for equipment to add your
thermostat.
1 2
3
5
4
5 Sec 5 Sec
For pairing with RX2, set
the internal switch of the
receiver to RX2 and choose
at step 4. After
that, follow the same
procedure as described
above.
6
9
7
10
8
11
12 13
Note: Once connected to the App, the time and date will update automatically. Select the desired
programming mode (5/2 days, 7 days or 24h) and create your own schedule.
3 Sec 3 Sec
1 2 3
4 5
1
3
5
2
4
6
Select the wiring centre number with or
(max 9). Conrm your choice by .
Select the group number with or .
Conrm your choice by .
Grouping (Oine only).