Multistore EXC-750 User manual

Assembly InstructIons
WHITE #0027280 LIgHT Oak #2683510 Dark COCO #2683548
2000H x 750W x 450D
HAngIng
rAILS
2
PACK
1
eXeCutIve rAnge
eXC-750

ASSEMBLY INSTRUCTION FOR EXC-750
TOP of UNIT
When aaching unit to wall put safety bracket in
middle of unit with 5/8 pan screw then 25mm pan
head screw into wall. For plasterboard without a
stud it is recommended to use a plug with screw
(not provided).
PARTS IDENTIFICATION LIST
2 x TOP GABLES
2 x BOTTOM GABLES
2 x BACKING BOARDS FOLD LINE
3 x FIXED SHELF
1 x BOTTOM KICK
NO MODEL DESCRIPTION QTY
1CONFIRMAT SCREWS 20
2 CAPS 20
3DOWELS 4
4BACKING NAILS 75
5RAIL FLANGES 4
NO MODEL DESCRIPTION QTY
65/8 PANHEAD WALL SCREWS 1
725mm PANHEAD UNIT SCREWS 1
8“L” SAFETY BRACKET 1
9 HANGING RAIL 710 x 30 2
2000mm H x 750mm W x 450mm D
1035mm x 445m x 16mm
966mm x 445m x 16mm
718mm x 445mm x 16mm
718mm x 61 x 16mm
975mm x 744 x 3 962mm x 744 x 3
BOTTOM
TOP
FOLD LINE

RAIL SUPPORT
BRACKETS DOWELS FIXED SHELF KICK
TAKE YOUR GABLES AND LAY THEM
OUT FLAT, YOU SHOULD HAVE 2 X TOP
& 2 X BOTTOM GABLES. USING A
LITTLE WOOD GLUE (NOT SUPPLIED) IN
YOUR PRE-DRILLED HOLES, INSERT
YOUR WOOD DOWELS INTO 2 OF THE
HOLES AND PUSH YOUR TOP INTO
YOUR BOTTOM GABLE.
NEXT STEP: MAKE SURE YOUR EDGED FRONTS ARE FACING
DOWN TO THE FLOOR.
ALIGN YOUR SHELVES AND KICK TO THE LEFT-HAND GABLE,
SCREW THEM INTO PLACE ATTACH YOUR RIGHT-HAND DO THE
SAME.
FOLD OUT BOTH TOP AND BOTTOM BACKS, PROCEED TO NAIL
THEM INTO POSITION MAKING SURE YOU ARE SQUARE.
THE TOP BACK IS LONGER SO IT CAN BE NAILED ALONG
WITH THE BOTTOM ONTO THE FIXED SHELF.
YOU WILL NEED 2 X 5/8 x 6 WOOD
SCREWS FOR THE NEXT STEP.
TAP INTO POSITION YOUR FLANGES
INTO THE HOLES PROVIDED IF YOU
WISH YOU CAN SCREW IN 1 SCREW
INTO THE MIDDLE OF THE FLANGE
AND SLIDE YOUR HANGING RAIL.

multistore.com.au
Multistore Industries (Aust) Pty Ltd
9 Nevilles Street, Underwood QLD 4119 P:[phone] [email protected]
For easy assembly instructions, please refer to video on our website: www.multistore.com.au
Versatile Storage Units
for any room