Listed by
Underwriters
Laboratories
JGS650SEF
GE®30" Slide-In Gas Range
Dimensions and Installation Information (in inches)
For answers to your Monogram® or GE®
appliance questions, visit our website at
geappliances.com or call GE Answer Center®
service, 800.626.2000.
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Specification Revised 7/13 330238
*ADA qualified based
on Uniform Federal
Accessibility Standards
Note: Door handle protrudes 3" from door face. Cabinets and
drawers on adjacent 45° and 90° walls should be placed to
avoid interference with the handle.
Note: Cabinets installed adjacent to slide-in ranges must
have an adhesion spec of at least 194° temperature rating.
Installation Information: Before installing, consult
installation instructions packed with product for
current dimensional data.
Minimum to
cabinets on
either side
of the range.
Minimum
clearance
to left wall
Minimum Minimum
clearance to
right wall
Maximum
depth for
cabinets above
countertops
Front edge of
the range side
panel forward
from cabinet
To cabinets below cooktop
and at the range back
To cabinets
below
cooktop and
at the range
back
18"
6"
30"
30"
13"
3"
36"
0"
0"
GAS PIPE AND ELECTRICAL
OUTLET LOCATIONS
SINGLE OVEN SLIDE-IN GAS RANGE
Recommended area for 120V
outlet on rear wall and area for
through-the-wall conection of
pipe stub and shut-off valve.
Recommended area
for through-the-floor
connection of pipe stub
and shut-off valve.
4 1/2"
4"
2"
8"
5"
3"
14 1/2"
9"
30"
24"
floor to counter
35" to 36 1/2"
3 1/4"
47 5/8"
29 3/8"
w/ handle
26 7/8"
w/o handle
30"
cooktop edge to edge
31 1/4"
Minimum to
cabinets on
either side
of the range.
Minimum
clearance
to left wall
Minimum Minimum
clearance to
right wall
Maximum
depth for
cabinets above
countertops
Front edge of
the range side
panel forward
from cabinet
To cabinets below cooktop
and at the range back
To cabinets
below
cooktop and
at the range
back
18"
6"
30"
30"
13"
3"
36"
0"
0"
GAS PIPE AND ELECTRICAL
OUTLET LOCATIONS
SINGLE OVEN SLIDE-IN GAS RANGE
Recommended area for 120V
outlet on rear wall and area for
through-the-wall conection of
pipe stub and shut-off valve.
Recommended area
for through-the-floor
connection of pipe stub
and shut-off valve.
4 1/2"
4"
2"
8"
5"
3"
14 1/2"
9"
30"
24"
floor to counter
35" to 36 1/2"
3 1/4"
47 5/8"
29 3/8"
w/ handle
26 7/8"
w/o handle
30"
cooktop edge to edge
31 1/4"
Minimum to
cabinets on
either side
of the range.
Minimum
clearance
to left wall
Minimum Minimum
clearance to
right wall
Maximum
depth for
cabinets above
countertops
Front edge of
the range side
panel forward
from cabinet
To cabinets below cooktop
and at the range back
To cabinets
below
cooktop and
at the range
back
18"
6"
30"
30"
13"
3"
36"
0"
0"
GAS PIPE AND ELECTRICAL
OUTLET LOCATIONS
SINGLE OVEN SLIDE-IN GAS RANGE
Recommended area for 120V
outlet on rear wall and area for
through-the-wall conection of
pipe stub and shut-off valve.
Recommended area
for through-the-floor
connection of pipe stub
and shut-off valve.
4 1/2"
4"
2"
8"
5"
3"
14 1/2"
9"
30"
24"
floor to counter
35" to 36 1/2"
3 1/4"
47 5/8"
29 3/8"
w/ handle
26 7/8"
w/o handle
30"
cooktop edge to edge
31 1/4"
