Murphy PowerView PV780 User manual

00-02-0859
2016-06-30
Section 78
PowerView®
Model PV780
Operations Manual

In order to consistently bring you the highest quality, full-featured products, we reserve the right to change our
specifications and designs at any time. The latest version of this manual can be found at www.fwmurphy.com.
Please read the following information before installing.
BEFORE BEGINNING INSTALLATION OF THIS MURPHY
PRODUCT:
Read and follow all installation instructions.
Please contact Enovation Controls immediately if you have any
questions.

Table of Contents
PV780 Features and Operations ..............................................................................................1
Setting Up your PV780 Display for the First Time.................................................................2
Product Features........................................................................................................................4
Power Up .....................................................................................................................4
Main Menu ...................................................................................................................4
Gauge Display..............................................................................................................5
Fault Code Pop-ups .....................................................................................................7
User Settings................................................................................................................8
Utilities........................................................................................................................11
Software Updates.....................................................................................................................13
Upload a New Configuration File to the Display.........................................................13

THIS PAGE INTENTIONALLY LEFT BLANK

Section 78 00-02-0859
2016-06-30 -1-
PV780 Features and Operations
Flat Screen Display
A color screen displays gauges, soft key commands, and fault messages, as well as menu
options for setup and configuration.
Soft Key Commands
Columns of vertical commands may be located to the left and/or right of the display. They will
change according to the options available for the screen being displayed.
Function Keys
The function keys correspond to the soft key commands and allow selections to be made
accordingly.
MENU Key
Pressing the MENU key at any time displays the list of menu options.
ENTER Key
Pressing the ENTER key will select the option displayed much like the ENTER key on a
keyboard. The ENTER key also brings up the soft keys. Press once to display the left and
right arrows. Press twice to display all the soft keys. Press three times to hide all the soft
keys.

Section 78 00-02-0859
2016-06-30 -2-
Setting Up your PV780 Display for the First Time
The guidelines presented below are intended for setting up the PV780 display for the first time.
Once the configuration is set up, there is no need to revisit or change any of the settings.
NOTE: If you require assistance during the set up process, contact Enovation
Controls customer support at the office nearest to you (see page 16).
1. At the main menu, press the soft key to the left of Utilities
2. The Utilities sub-menu is displayed.

Section 78 00-02-0859
2016-06-30 -3-
3. From the Utilities sub-menu, select System Settings. The following screen is displayed
.
4. With the cursor highlighting the J1939 source addresses, use the left side soft keys to
scroll through the ports and the right side soft keys to change the address. Press the
Save key to save selected changes or the Restore Defaults key to return to the default
settings. The field options consist of the following:

Section 78 00-02-0859
2016-06-30 -4-
Product Features
Power Up
The PowerView display is most frequently installed with power connected to the ignition.
When the ignition is turned on, the PowerView display powers up and the engine health
statistics can be viewed via preset gauges.
To see more gauge screens, press the Enter key.
Main Menu
The main menu is activated at any time by pressing the Menu key on the display.
The following features are accessed through the main menu:
•Gauge Display – provides a series of screens that display engine and auxiliary
information in a variety of formats.
•Engine Diagnostics – displays a list of engine fault codes and descriptions.

Section 78 00-02-0859
2016-06-30 -5-
•User Settings – allows you to customize the display options for ambient light and
brightness, set US or metric units, language, specify the Home screen and screen setup
status.
•Utilities – allows configuration of the plug address. Also displays software version
information at the top of the page.
Gauge Display
The Gauge Display screen consists of several predefined layouts that contain combinations of
analog gauges, straight bar gauges, or digital (text) readouts. These screens are displayed
upon startup.
To scroll through the various gauge screens, press the Prev and Next soft keys. This can be
repeated until all screens have been viewed. The currently displayed screen will stay active
until another key is pressed.
Soft Key Commands
When a Gauge Display screen is active, pressing the Enter key will display soft key
commands, as shown below. Continuing to press Enter will toggle through any additional soft
keys, and will eventually remove the soft key commands from the screen.
Soft Key commands provide quick navigation and access to the following features:
•Home
•Day/Night
•Prev
•Next

Section 78 00-02-0859
2016-06-30 -6-
Home - This one-touch navigation feature allows a pre-defined Home screen to be accessed
from the available Gauge Display screens. Once selected, the Home screen will be displayed
anytime the Home key is pressed.
NOTE: For instructions on how to setup the Home screen, refer to the User
Settings section of this manual.
Day/Night - Allows you to toggle the display screen between Day View and Night View.
NOTE: This feature can also be changed in the User Settings, see this section
of this manual.
Day View Night View
Video – When enabled, displays either full screen video or partial video within a window on the
gauge display.
NOTE: For instructions on how to enable full or partial screen video, refer to the
User Settings section of this manual.
Full Screen Video
Example Partial Screen Video
(Video Screen displayed is from custom configuration)
Previous and Next keys allow you to scroll through and display the various gauge screens.
NOTE: For instructions on how to turn screens ON or OFF, refer to the User
Settings section of this manual.

Section 78 00-02-0859
2016-06-30 -7-
Fault Code Pop-ups
A fault condition will trigger a popup dialog box on the screen describing the nature of the fault.
Corresponding red or amber fault lights on the corners of the unit are also activated to indicate
the severity of the fault. The following screen is an example of warning fault code popup.
How to Hide/Show Faults
To hide the fault code popup being displayed on the screen, press the soft key on the right
next to the Hide icon. The popup will disappear, however the Warning or Stop icon will remain
on the screen to indicate there is still a fault. Pressing Hide does not clear the fault; it only
hides the popup message.
When a fault code has been hidden, a Recall icon will remain on the right side. When this soft
key is pressed, the fault code will again be displayed. When a popup message has been
activated, a pop-up message will be displayed until the alarm is acknowledged by pressing the
Hide key.
Scrolling Through Multiple Messages
The title-bar of the fault code popup may indicate multiple messages, as in Diagnostic
Message 1 of 3. Press the Prev and Next keys to scroll through the different messages.

Section 78 00-02-0859
2016-06-30 -8-
User Settings
User Settings provides options to specify viewing preferences for the PV750 Display. Pressing
Up and Down navigates through the options. To change an option, press the corresponding
soft key next to the desired soft key command.
Ambient Light
Night and Day options are provided for ambient lighting. The screens below illustrate these
options. When the ambient lighting settings are changed in User Settings, the power-on
default is changed.
Day View Night View
NOTE: The ambient lighting option is also accessible through soft key
commands on the gauge display screens. When selected, the Day/Night soft key
toggles the display to the opposite mode.

Section 78 00-02-0859
2016-06-30 -9-
Brightness
You can set the brightness control by using the soft keys to change the settings in +1% and
+5% increments until the desired brightness is achieved.
NOTE: Brightness level will change with ambient light setting. Two
brightness levels are saved; one for day and one for night.
Units
Select how units are displayed by using the soft keys to select from the following:
•USA Standard
•Metric Bar
•Metric kPa
•British Standard

Section 78 00-02-0859
2016-06-30 -10-
Language
This option allows you to select the language that will be displayed on the PowerView.
Available languages include English, French, Spanish, German, Italian, and Chinese.
Languages are selected from the soft keys. Press More to view additional languages.
Save
Once all changes have been made, press Save. The following confirmation screen is
displayed.
Restore Defaults
Restore Defaults sets the display to the original factory settings. During troubleshooting, this
can be used as a last resort to completely reset the display to a known state.
To restore the default user settings, press Restore Defaults. Confirm the action on the next
page.

Section 78 00-02-0859
2016-06-30 -11-
Utilities
Utilities allow you to reset external gauges and configure communication settings. It is typically
only accessed when the unit is first installed in order to configure the unit. The following sub-
menu is displayed when Utilities is selected.
System Settings
The System Settings screen displays the current software version loaded on the PV750
display. You can set individual settings for the available options and Save, or choose to select
Restore Defaults for the factory settings.
The yellow Up and Down keys on the left allow you to move the cursor through J1939 Source
Addresses fields. While the cursor is highlighting a field, the gray Up and Down keys scroll
through available options. Once all the options have been selected, press Save.

Section 78 00-02-0859
2016-06-30 -12-
Service Reminders
This option allows you to reset the 5 built-in service reminders:
•Change Engine Oil – Default interval 50.0 Hrs.
•Chang Air Filters – Default interval 75.0 Hrs.
•Change Hydraulic Oil – Default interval 100.0 Hrs.
•Service Engine – Default interval 125.0 Hrs.
•Service Machine – Default interval 150.0 Hrs.

Section 78 00-02-0859
2016-06-30 -13-
Software Updates
Upload a New Configuration File to the Display
1. This display accepts a USB Drive and SD card to upload a new configuration file.
Choose one or the other.
a. Obtain a FAT32 formatted USB thumb drive or a SDSC (SD) card.
b. Copy the update file from your computer to a USB drive or SD card.
NOTE: We recommend the update file is the only file on the root directory
of the USB drive or the SD card.

Section 78 00-02-0859
2016-06-30 -14-
CAUTION: Avoid damaging the Display. If you lose power to the
display or connection to the USB or SD drive during the download,
the display will be damaged and must be sent back to the factory.
2. Power-off the Display. (Unplug the power connector from the back side of the display.)
3. Choose step 4 or 5 then continue to step 6.
USB Drive Option
4. Install the USB drive:
a. Insert the Programming Cable into the gray connector on the back side of the
display.
b. Insert the USB drive containing the update file into the USB connector end on the
Programming Cable
SD Card Option
5. Install the SD card:
a. Remove and retain the cover screws (T20) from the back of the unit and remove
the cover.
b. Align the SD card containing the update file in the mounting slot and lightly push
it in until you feel it lock in place.

Section 78 00-02-0859
2016-06-30 -15-
6. With the USB drive or the SD card installed, press and hold the enter key (bottom right)
on the display for a few seconds as you Power-on the display. The system will boot up
in configuration mode.
Using USB drive
Using SD card
7. If you are using a SD card, press the soft key next to the green SD Card icon to select
it. The update file name on the SD card will display.
NOTE: If the SD card is not correctly inserted, an icon showing no SD
card is displayed. Power-off and reinsert the SD card.
NOTE: If you do not see the update file, use the up and down arrows to
view files available. (This is only necessary if other files are also on the
USB or SD drive root directory, which is not recommended.)
8. Press the soft key next to the right arrow to select the file in view. Press again to
confirm. The Progress Bar Screen displays the current download by percent.

Section 78 00-02-0859
2016-06-30 -16-
9. Allow the display to automatically reboot when you see the Check Mark Screen
momentarily.
10. You have successfully uploaded the new update file when you see the Murphy screen
momentarily display.
11.Power-Off the display and remove the components:
a. If applicable, remove the Programming Cable and the USB thumb drive.
b. If applicable, remove the SD card, ensure the seal is in the grove, install the
cover and secure it with the screws previously removed. Do not over tighten.
c. If applicable, reconnect any other components you may have removed.
d. Power-on the display when ready for use.