Murphy PowerView PV780B User manual

00-02-1019
2018-03-02
Section 78
PowerView®
Model PV780B
Installation Manual

In order to consistently bring you the highest quality, full-featured products, we reserve the right to change our
specifications and designs at any time. The latest version of this manual can be found at enovationcontrols.com.
Please read the following information before installing.
BEFORE BEGINNING INSTALLATION OF THIS MURPHY
PRODUCT:
Read and follow all installation instructions.
Please contact Enovation Controls immediately if you have any
questions.

Table of Contents
Hardware Installation.................................................................................................................5
Inspecting Package Contents.......................................................................................5
Dash-Mounted Installation............................................................................................5
Wiring Information .....................................................................................................................9
Pin Out Specifications ..................................................................................................9
Configuration Information ......................................................................................................11
Wiring Schematics – Black Connector .......................................................................13
Wiring Schematics – Gray Connector ........................................................................14
Specifications ...........................................................................................................................15
Dimensions ...............................................................................................................................16

THIS PAGE INTENTIONALLY LEFT BLANK

Section 78 00-02-1019
2018-03-02 - 5-
Hardware Installation
The following instructions will guide you through installing the PowerView display.
Inspecting Package Contents
Before attempting to install the product, it is recommended that you ensure all parts are
accounted for and inspect each item for damage (which sometimes occurs during shipping).
The items included in the box are:
PV780B unit
Installation kit – P/N 78-00-0638 includes:
•Four each machine screws and flat washers
•Four Nylock nuts
•Installation manual web reference insert
Dash-Mounted Installation
Tools needed.
•Drill with 5/32 in. size bit
•Jigsaw
•Wrench or socket 6-32 Nylock nuts (provided) to studs
Preparing the Dash
Determine the location of the PV708B in the dash. Use the Installation Template (included at
the end of the manual) as a guideline to cut a hole in the dash to the specified dimensions.
Drill holes where indicated on the template for the mounting screws.
NOTE: When using the paper template from the manual, if you downloaded this
document from the Enovation Controls website, be aware that the pdf file may
not automatically print to scale. When submitting the file for print, you will need
to select None for Page Scaling. Check the accuracy of the printed template by
verifying the measurements labeled on the template are correct.
If this manual was supplied with your product, the template will be correct.

Section 78 00-02-1019
2018-03-02 - 6-
Mounting the Unit
1. Place the back side of the display through the opening in the dash.
2. Use the four screws to line up the unit with the drilled holes.
3. Push the unit through the opening and screws through the drilled holes until the back of
the case is flush.
4. Use the Nylock nuts provided to tighten unit to the dash. Use the appropriate wrench or
socket to tighten. Torque lock nuts to 8-10 inch-pounds.
Flush Mounting the Dash
1. Cut the dash to allow for the display without bezel. Carefully follow the measurements
of the included dash cut-out to ensure enough of the dash is available to properly
secure the display. Torque the 6-32 Nylock nuts to 5 inch-pounds.
2. Place the display behind dash and line up the four mounting holes on the display with
the holes in dash.
3. Install four bolts and tighten nuts.
Mounting Options
A = Elevated Mount with Bezel
(78051574) / Ram Mount
B = Rear Mount
C = Flush Mount
Support Bracket
A special bracket supports the PV780 display with RAM mount C size components.

Section 78 00-02-1019
2018-03-02 - 7-
PV780 Bracket for RAM Mount Option
Part Number Description Order Details
78001053 Bracket and Screw Kit for PV780B Display
(RAM mount not included)
Call your regional sales
office or account manager.
RAM™ Mounts
The following mount accessories may be used with our Bracket and Screw
Kit “78001053”.
RAM Mount Options for PV780B
Part Number Description Order Details
RAM-101U-B (2) 1.5 in. Balls with 2.25 in. Arm
Order on website:
http://tinyurl.com/mdo3yru
RAM-101U (2) 1.5 in. Balls with 4.5 in. Arm
RAM-101U-D (2) 1.5 in. Balls with 9 in. Arm
RAM-202U 1.5 in. Ball
RAM-201U 4.5 in. Arm
RAM-201U-D 9 in. Arm
RAM-103U-B 1.5 in. Ball with 2.25 in. Arm
RAM-103U 1.5 in. Ball with 4.5 in. Arm

Section 78 00-02-1019
2018-03-02 - 8-
Bracket Mounting Assembly
Mounting with Kit # 78001295
Available Accessories for the PV780B
The following PV780B accessories are available through Enovation Controls:
Part Number Description Order Details
78090098 Programming Kit, PV780
Accessories
78051181 Cover, PV780
78001053 Bracket Kit (screws included)
78001055 Harness, Gray Connector, USB
78001056 Harness, Gray Connector, Flying Leads
78001057 Harness, Black Connector, Flying Leads
78001017 Harness, Black Connector, Development
78001018 Harness, Gray Connector, Development
78090069 Harness, PV750 Conversion, Power/CAN
Service78051180 Bezel, PV780
78001295 Kit, Mounting Bracket, PV780

Section 78 00-02-1019
2018-03-02 - 9-
Wiring Information
Pin Out Specifications
Black Connector
1 Digital Input 1
2 Analog Input 3
3 Analog Input 2
4 Analog Input 1
5 CAN1 Low
6 CAN1 High
7 Battery
8 Ground
9 Analog Input 3 Ground
10 Analog Input 2 Ground
11 Analog Input 1 Ground
12 Digital Input 3
13 Digital Input 2
14 Frequency Output 1
15 Ignition Input
16 No Connect
17 No Connect
18 CAN2 Low
19 CAN2 High
20 Digital Input 4
21 Digital Input 5
22 Digital Output
23 Frequency Output 2

Section 78 00-02-1019
2018-03-02 - 10 -
Gray Connector
1 Video Input 1
2 Video Input 2
3 Video Input 3
4 RS-485 High
5 RS-485 Low
6 No Connect
7 No Connect
8 No Connect
9 Video Input 1
Ground
10 Video Input 2
Ground
11 Video Input 3
Ground
12 No Connect
13 Frequency Input
14 Frequency Return
15 No Connect
16 USB D-
17 USB D+
18 USB 5V
19 USB Ground
20 USB Shield
21 No Connect
22 No Connect
23 No Connect

Section 78 00-02-1019
2018-03-02 - 11 -
Ethernet (M12) Connector
1 Ethernet TX+
2 Ethernet RX+
3 Ethernet TX-
4 Ethernet RX-
5 Ethernet Ground
NOTE: Ethernet connectivity is optional.
Configuration Information
Follow these steps to download a custom configuration to the PV780B display:
Step Action
1 Ensure that PowerVision is open on your computer.
2 Connect the PV780B to the computer with the programming harness using either
the USB pigtail or the USB on-the-go found on the gray connector.
NOTE: If PowerVision does not detect the display, go to the
Adapter Properties. Select IPV4 properties, then change the IP
address to 192.168.0.1 and the Subnet mask to 255.255.255.0.
3 Create your custom configuration file within PowerVision.
4 Deploy the configuration file to the PV780B.
M-12, 5-pos, A-coded,
Plastic Knurl Connector Only

Section 78 00-02-1019
2018-03-02 - 12 -
Follow these steps to download a custom configuration using a USB drive:
Step Action
1 Create your custom configuration file within PowerVision.
2 Save the file to a USB drive.
3 Connect the USB drive to the USB port on the pigtail or on the USB on-the-go
connector provided with the programming kit.
4
Turn off the PV780B and turn it back on while holding down the bottom right key.
Continue to hold the button a few more seconds, then release once the screen
has entered into the bootloader.
5 Use the corresponding keys to the up/down arrows to find the desired file. Use
the corresponding right arrow key to select and continue. The right arrow turns
green; press again to confirm.
6 When the installation is complete, a check mark is displayed in the middle of the
screen. The PV780B will power cycle and boot to the new configuration.

Section 78 00-02-1019
2018-03-02 - 13 -
Wiring Schematics – Black Connector
WARNING: Failure to install the unit per the specified wiring diagrams may cause
damage to the unit. DO NOT connect power to the video ground. Warranty is void for
damage caused by incorrect wiring.

Section 78 00-02-1019
2018-03-02 - 14 -
Wiring Schematics – Gray Connector
WARNING: Failure to install the unit per the specified wiring diagrams may cause
damage to the unit. DO NOT connect power to the video ground. Warranty is void
for damage caused by incorrect wiring.

Section 78 00-02-1019
2018-03-02 - 15 -
Specifications
Computing
Main Processor: Renesas R-Car M2, 32-Bit Arm Cortex A15 Processor @ 1.5 GHz
Operating Sys: QNX®Real-time Operating System
Storage: 8GB Flash memory for Operating System, Application and Configuration
Ram: 512 Mb DDR3-SDRAM
Graphics: Renesas graphics processor
Displays
Type: 7” (178 mm), LVDS TFT LCD with LED backlight, 24-Bit color
Resolution: WVGA, 800 x 480 pixels
Contrast Ratio: 600:1 (typical)
Brightness: 1000 cd/m2
Surface: Anti-glare, hard coating
Touch Panel: Projected capacitive (PCAP) with Glove touch
Keypad: 10 tactile configurable soft keys with white LED backlight
Hardware
Real-time Clock: With battery backup
Connectors: (2) Ampseal 23 pin
(1) M12, 5-pin
(1) USB pigtail
Video Inputs: (3) NTSC/PAL (Single channel viewable)
Communication
CAN: (2) CAN 2.0B according to ISO-11898-2, J1939 and proprietary messaging
Serial: (1) RS-485 serial (Modbus: Master/Slave)
USB: (2) USB 2.0 Full Speed Host
Ethernet: (1) Ethernet 10/100 Base-T (Optional: 78700628 Only)
Wi-Fi: 802.11 b/g radio (Optional: 78700628 Only)
Bluetooth: Fully Integrated Bluetooth 2.1, Class 1 (Optional: 78700628 Only)

Section 78 00-02-1019
2018-03-02 - 16 -
Electrical
Operating Volts: 6-36 VDC, Reverse polarity protected
Outputs:
(1) 500 mA Switched Low-side
(1) Frequency Output (2Hz – 3KHz)
Inputs:
(3) Analog 0-5 VDC, 4-20mA, Resistive, 10-bit resolution
(5) Discrete digital, active high
(1) Frequency In (2Hz – 10KHz) 5V pk-pk min, 49V pk-pk max
Dimensions
Measurements shown in inches (mm)

- THIS PAGE INTENTIONALLY LEFT BLANK -