Muscle Rack UR301260PB5P-SV User manual

MODELS:
UR301260PB5P-SV
UR361872PB5P-SV
UR481872PB5P-SV
UR482472PB5P-SV
(D) Wood Shelf
(A) Post
(B) Brace
5-SHELF Boltless Steel Shelving
with parcleboard shelves
Should you have any comments, damage, missing parts, or problems with assembly of this unit contact us:
Chat: www.edsal.com/chat or www.edsal.com/contact
Email: [e-mail]
Phone: [phone]
To obtain replacement parts please provide: Model Number, Part Number & Description,
Location Purchased, and Date Purchased
Edsal Manufacturing Co. LLC
Chicago, IL 60609
US Patents & Patents Pending
Rev: C063020
(C) Beam
(E) Post Joint
PARTS LIST
Qty Model UR301260PB5P-SV
(30w x 12d x 60h) Model UR361872PB5P-SV (36w x 18d x 72h) Model UR481872PB5P-SV (48w x 18d x 72h) Model UR482472PB5P-SV (48w x 24d x 72h)
Descripon
Part Number Part Number Part Number Part Number
(A) Post 8URPS30-SV URPS36-SV URPS36-SV URPS36-SV
(B) Brace 10 URBR12-SV URBR18-SV URBR18-SV URBR24-SV
(C) Beam 10 URBM30-SV URBM36-SV URBM48-SV URBM48-SV
(D) Wood Shelf 5RPB31230 RPB31836 RPB31848 RPB32448
(E) Post Joint 4MPC0409-SV MPC0409-SV MPC0409-SV MPC0409-SV
(F) Post Cap 8RL-PC-B1.4 RL-PC-B1.4 RL-PC-B1.4 RL-PC-B1.4
IMPORTANT SAFETY INFORMATION
Read through this enre manual for important guidelines and instrucons prior to assembly. Failure to follow these guidelines and
instrucons can result in property damage or serious personal injuries.
This unit should be placed on a level surface. Failure to do so can result in poor product performance or create a possible safety haz-
ard. DO NOT CLIMB, STAND or USE THIS UNIT AS A LADDER. TO PREVENT TIPPING, ALWAYS SECURE TO A WALL WITH SUITABLE FAS-
TENERS, NOT INCLUDED. DO NOT USE THIS UNIT TO STORE AQUARIUMS. CAUTION: CONTAINS SMALL PARTS, KEEP CHILDREN AWAY
DURING INSTALLATION. USE TWO OR MORE PEOPLE TO ASSEMBLE AND MOVE THE UNIT TO AVOID INJURY. Do not use this unit for
anything other than the manufacturer’s intended purpose. Use care when working with metal parts, wear gloves for protecon. Pe-
riodically inspect the unit to ensure brace/beam rivets are properly seated into post slots. Keep this manual for future reference.
Do not exceed the maximum weight capacity of 800 lbs (363 kg) for each shelf, not to exceed 4,000 lbs (1,814 kg) for the enre
shelving unit. Evenly distribute weight loads across enre shelf surface. Always store larger, heavier items on the boom levels and
small lighter items on the upper levels.
Assembly is done with the rivets of the beams and braces ng into the slots of the post. A rubber mallet may be used on the
beams and braces to seat the rivets properly. A hammer can also be used, providing one uses a cloth or a block of wood between
the hammer head and the parts to prevent damage. Tap gently and be sure the rivets are straight and fully engaged.
GENERAL INSTRUCTIONS
PARTS
(F) Post Cap

Wood Shelf
Beams
Braces
Wood Shelf
Figure F
Assemble four (4) posts to the four boom post assemblies by using
four (4) of the post joints. Place the post joint into the top of the
boom post assembly and tap down to properly seat. Next place a
post into the top of the post joint and tap down to properly seat (see
gure G). Connue by adding the third level using two (2) beams and
two (2) braces just above the post joints. Again tap lightly to seat the
rivets. Add a wood shelf to the level (see gure H).
Step
3
Connue by adding the fourth and h level to the unit using
two (2) beams and two (2) braces per level. Tap lightly to
properly seat the rivets and add the nal wood shelves to the
unit. Place (4) post caps onto each post (see gure I). Do a nal
inspecon to make sure all rivets are securely seated into the
narrow ends of the post slots. The assembly is now complete.
Figure G
Top
Post
Inside
View
Bottom
Post
Post
Joint
Outside
View
Figure I
Add a wood shelf to the level previously built (see gure E),
then connue working by adding the second level using two (2)
beams and two (2) braces in the post slots of your desired
locaon (see gure F). Again, place the rivets of the beams
and braces into the post slots with the shelf ledge facing up
and tap lightly to seat the rivets. Add a wood shelf to the
second level.
Figure H
Third Level
Note: Posts are
directional.
The narrow
end of slots
must point
down.
Step
4
Step
2
Step
1
ASSEMBLY INSTRUCTIONS
Fourth
Level
Fifth
Level
Post
Cap
Begin by placing four (4) post caps to the boom of four (4) posts
see gure A). Next, assemble two (2) post with one (1) brace. Skip-
ping one slot from the boom of the post (see gure B), place the
rivets into post with the narrow end of the slots poinng down,
and with the shelf ledge of the brace facing up (see gure C). Tap
lightly on the top edge of the brace to seat rivets. Repeat with two
(2) post and one (1) brace. Next assemble the two (2) post units
with two (2) beams, skipping one slot from the boom of the post
(see gure D). Place the rivets into post with the narrow end of the
slots poinng down, and with the shelf ledge of the brace facing
up (see gure C). Tap lightly on the top edge of the beam to seat
rivets.
Figure D
Beams
Brace
Posts
Figure B
Figure A
Post
Post cap
Figure E
Posts are
direconal.
The narrow
end of the
slots must
point down.
Brace/Beam
Rivets
Figure C
Tap down
lightly to seat
the rivets