MX Douche Bidet Kit User manual

Douche Bidet Kit
1
YEAR
G
U
A
R
A
N
T
E
E
R
E
P
L
A
C
E
M
E
N
T
R
655TW 0315GF

Before you Start
These instructions contain all the necessary installation information for your MX Douche Bidet Kit.
Please read these instructions carefully and check all the components for any sign of damage
before starting your installation.
The installation must be carried out by a suitably competent person.
Conveniently situated service valves to the inlet supply must be tted as an independent method of
isolating the unit for maintenance or servicing.
Please note that you may require 13mm copper pipe and fittings to install the unit.
(NOT SUPPLIED)
Once the supply pipe work has been tted ush through to remove any debris form entering
the valve and spray head.
Operating Pressures (Bar)
Min Max
Basin Taps 0.2 5.0
Maximum static water pressure for this unit is10 bar.
Technical Help
Technical Service Line: 0845 505 2211 / 01684 293311 Open Mon–Fri 9am–5pm

Tools and Materials Required (not supplied)
Power Drill Adjustable Spanner
Suitable Drill Bits Pencil Safety Eyewear
HB
Safety Notes
Caution: Prior to drilling walls, check that there are no hidden electrical cables or water pipes. When using power
tools do not forget to use safety eyewear and clothing. Unplug power tools when not being used.

A Handset x 1
B
B Hose x 1
C Valve with built in
bracket x 1
A
C
Parts Supplied - Douche Bidet Kit

A Handset x 1
B Hose x 1
C Valve with built in
bracket x 1
Having established the position of the valve so that the controls can be comfortably reached
whilst in use.
The supply pipe work can be plumbed from the inlet pipe to the toilet or any other suitable supply. The pipe
work can be exposed or concealed and must nish with a suitable 1/2” BSP female tting (Not supplied)
Note: Easily accessible service valve should be tted for maintenance.
After ushing pipe work t valve to 1/2” BSP female tting. (g.1) For concealed option insure shroud is
tted to thread.
Installation – Douche Bidet Kit
1
2
3
4
Note! Other tools and materials may be needed depending on the specic site requirements.
1

23
Connecting the hose and spray head. Connect the hexagon nut to the outlet of the valve
making sure the sealing washer is in place. (g.2) Screw remaining cone nut to the thread of
the spray head again making sure the sealing washer is tted. (g.3)
5
6
Installation – Douche Bidet Kit
Commissioning of Unit. a) Turn on water and check for leak. b) Check inlet connection.
c) Turn on valve and check hose connections. d) Turn on spray head check water spray.
Note: Always turn of valve when not in use.

Product supplied by the MX Group and/or its subsidiaries
Technical Service Line: 0845 505 2211 / 01684 293311 Open Mon–Fri 9am–5pm
Marleton Cross Limited Trading as The MX Group
Alpha Close, Delta Drive,Tewkesbury Industrial Estate,Tewkesbury, Glos. GL20 8JF.
www.mx-group.com email: [e-mail]
655TW_03_15_GF