MyCableMart ZT-T-606B User manual

HDMI to AV+Stereo Converter
HD VIDEO CONVERTER
User Manual
Model ZT-T-606B
HDMI to Composite Video + Stereo Converter
Bring High-Definition to life!
Thank you for purchasing our product. To ensure safety and many years
of trouble-free operation of this product, please read the manual
carefully before using.

HDMI to AV+Stereo Converter
1.0 INTRODUCTION
HDMI to CVBS signal converter will convert digital HDM video and audio
signals to composite video signal and the L/R stereo audio signals, while
support DVI system sideline signals. Help users convert the high quality of the
HDMI video signal into normal CVBS signal (standard-definition 480i, 576i,).So
that can play on TV, VHS VCR, DVD recorders, etc. Support NTSC and PAL
two TV format. Note that an HDMI signal typically provides 1080 lines of
resolution – and a resulting composite video signal is much less 320 lines.
Display of a converted HDMI signal on a larger TV using this converter will
result in a “less sharp” image due to this resolution reduction.
2.0 FEATURES
1. Hardware conversion, plug and play without any software driver;
2. Support the HDCP protocol, support for HDMI 1.4b;
3. Support NTSC and PAL two standard TV formats;
4. One HDMI input, one AV output:
Inputs: HDMI x 1
Outputs: CVBS x1; L / R x1;3.5mm Stereo x1
5. HDMI input: 480i/p, 576i/p, 720p, 1080i/p,1920x1200;
6. Compatible with DVI mode 800x600,1024x768,1280x720,1280x1024
1920x1080/@60hz
7. CVBS output: 480I, 576I
8. Audio output: L/R channels;3.5mm earphone;
9. Dimensions：73mm(W)x60.5mm(D)x 22.5mm(H)
3.0 PACKAGING ACCESSORIES:
When first unpacking your extender please check to see if the following items
are included:
1.HDMI to AV Converter----------------------------1 Pc
2.User manual----------------------------------------1 Pc
3.Power supply---------------------------------------1 Pc

HDMI to AV+Stereo Converter
4.0 PANEL DESCRIPTION
Please study the panel drawings below and become familiar with the signal
input(s), output(s) and power requirements.
DC 5V ----------------------------------------------------------DC 5V Input
PWR---------------------------------------------------------Power indicator
PAL/NTSC -------PAL and NTSC standard format selector switch
HDMI -------------------------------------------------------------HDMI Input
A/V -----------------------------------------------------------------AV Output
Audio------------------------------------------------------earphone Output
5.0 APPLICATION AREAS
A. Home Use: set-top boxes, XBOX360, PS3, high-definition players.
B. Industrial sector: high-definition camera, video cameras
6.0 CONNECT AND OPERATE
Before installation, please make sure all devices you wish to connect have
been turned off.
1. Connect the HDMI input from source device to this converter.(Input cables
are optional)
2. For operation in the USA, set the video selection slide switch to NTSC.
(PAL is the European standard)
3. Connect the AV and Stereo audio output of this product to the display
device.
4. Insert the DC side of 5V power supply into this product and then connect the
AC side of the power supply into the wall outlet.
5. Power on all connected devices, choose the input of the display device
to its AV channel.
6. The image does not need to be adjusted; the converter will position it
automatically. The user may adjust the horizontal position under some extreme

HDMI to AV+Stereo Converter
condition.
Attention: Always Insert / Extract cable gently.
7.0 FAILURE CHECK:
No signal output:
A. If LED power indicator is not light, check whether the input access to the
mains power supply (AC110 ~ 220V).If external power supply LED does
not light, check whether the electronic exchange. Or external power supply
bad.
B. LED light, check the HDMI output device are set to the HDMI OUT, HDMI
cable for damage, AV display devices, whether or not cut to the AV
(CVBS)channel.
No color:
A. Check the AV cable damage or not.
B. NTSC-PAL formats with no corresponding NTSC or PAL TV
8.0 INSTALLATION AND PRECAUTIONS
To avoid electric shock, product damage and to protect your safety, please
note the following:
1. Please slowly plug or unplug signal cables and do repeatedly plug and
unplug
2. The equipment should not be placed under direct sun-light, damp
environments, or unventilated areas.
3. Liquid items should not be placed on the equipment.
4. Do not install the equipment near heat sources such as fire, power, or other
amplifiers that produce heat.
5. Do not insert the metal or other objects to the equipment in addition to
connecting cables to ports.
6. Always disposed of electronic devices following local disposal regulations.