D-Link Technical Support – How to install the DCS-930L. Page 2of 16
1. Connect the included Ethernet cable to the network cable connector located on the top panel at the rear
of the DCS-930L and attach the other end to your network, the network will u ually be a LAN port on your
Router.
En ure to attach the external power upply to the DCS-930L a well.
2. In ert the In tallation CD-ROM into your computer' optical drive and tart the autorun program. You can
al o brow e the content of your computer' optical drive and double click on the "autorun.exe" file a well.
If you have downloaded the Setup Utility from the D-Link Support Knowledge Ba e, and have extracted the
archive (*.zip file), you can al o double click on the "autorun.exe" file a well.
NOTE: For any prompts that require permission to run, it is best to 'Allow', 'OK' and or 'Accept' the files to
run and or be installed
3. Click the Start button to begin the etup:
