Mytopia HPF 08 X-Lite User manual

HPF X-Lite Treadmill
User manual
WARNING! Read and understand all
safety warnings and instructions carefully
before using this machine. Failure to
follow the warnings and instructions may
result in electric shock, fire and/or serious
injury. Save this manual for future
reference.
ATTENTION! Products covered by this
manual will vary in appearance, assembly,
inclusions, description and packaging.
NOTE! This manual covers multiple
styles of product as well as options /
accessories that may not be suitable for
the machine you have purchased.

Product Manual - Treadmill
Index
Index.............................................................................................................................................................1
Safety...........................................................................................................................................................2
Product Diagram...........................................................................................................................................3
Assembly......................................................................................................................................................4
Before use....................................................................................................................................................5
Using your Treadmill.....................................................................................................................................6
Storage.........................................................................................................................................................7
Maintenance.................................................................................................................................................7
Troubleshooting............................................................................................................................................9
Specifications .............................................................................................................................................10
Appendix ....................................................................................................................................................11

Product Manual - Treadmill
170914105200
2
2
Safety
- Read all instructions before using the
treadmill.
- DANGER: To reduce the risk of electrical
shock, always unplug this product before
cleaning or attempting any maintenance
activity.
- WARNING: To reduce the risk of burns, fire,
electric shock, or injury, it is imperative to
connect each product to a properly
grounded electrical outlet.
- WARNING: Keep the area six feet (two
meters) by three feet (one meter) behind
the treadmill clear of any obstructions,
including walls, furniture, and other
equipment.
- WARNING: Be sure the emergency stop
lanyard is clipped to the user and in proper
position on the treadmill before beginning
any workout.
- To disconnect, turn power OFF at the
ON/OFF switch, then remove plug from
electrical outlet.
- Never operate product if it has a damaged
power cord or electrical plug, or if it has
been dropped, damaged, or even partially
immersed in water.
- Position this product so that the power cord
plug is accessible to the user. Keep the
power cord away from heated surfaces.
- Do not pull the equipment by the power cord
or use the cord as a handle. Do not run the
power cord on the floor under or along the
side of the treadmill.
- If the electrical supply cord is damaged, it
must be replaced by the manufacturer, an
authorised service agent, or a similarly
qualified person to avoid a hazard.
- Do not use this product in areas where
aerosol spray products are being used or
where oxygen is being administered. Such
substances create the danger of
combustion and explosion.
- Close supervision is necessary when used
near children, invalids or disabled persons.
- Do not use this product outdoors, near
swimming pools or in areas of high
humidity.
- Never operate product with the air
openings blocked. Keep air openings free
of lint, hair, or any obstructing material.
- Never insert objects into any opening in this
product. If an object should drop inside,
turn off the power, unplug the power cord
from the outlet, and carefully retrieve it.
- Never place liquids of any type directly on
the unit, except in an accessory tray or
holder. Containers with lids are
recommended.
- Do not use this product in bare feet. Always
wear shoes with rubber or high-traction
soles. Do not use shoes with heels, leather
soles, cleats or spikes. Make sure no
stones are embedded in the soles.
- Keep all loose clothing, shoe-laces, and
towels away from moving parts.
- Do not reach into, or underneath, the unit or
tip it on its side during operation.
- Handrails may be held to enhance stability
as needed, but are not for continuous use.
- Never mount or dismount the treadmill while
the running belt is moving.
- Use the handrails whenever additional
stability is required.
- In case of an emergency, such as tripping,
grasp the handrails, and place the feet on
the side platforms.
- Never walk or jog backwards on the
treadmill.
- Use this appliance only for its intended use
as described in this manual.
- Do not use attachments that have not been
recommended by the manufacturer.
- Do not expose yourself or others to danger.
- Do not permit others to use this machine
unless they have read this manual and are
trained in its operation.
- Always stop the motor and unplug the
treadmill before cleaning / clearing a
blockage or checking, maintenance or
working on the machine.

Product Manual - Treadmill
170914105200
3
3
Product Diagram
ATTENTION! Products covered by this manual will vary in appearance, assembly, inclusions,
description and packaging.

Product Manual - Treadmill
170914105200
4
4
Assembly
1. Unfold the treadmill and place the
arms into an upright position.
2. Connect the handle as shown
above lining up the 2 bolt holes on
each side, insert and secure all 4
Alan key bolts provided hand tight
plus half a turn.
3. Connect the computer control panel to the motor
by plugging it into the port just under the handle
bar.
4. Before use; move the locking nut (A) into its
storage bracket on the bottom of the treadmill as
shown. Replace the locking nut when storing or
moving the treadmill.
5. Always make sure the storage PIN (B) is in
place when folding the treadmill.

Product Manual - Treadmill
170914105200
5
5
Before use
HOW TO POSITION AND STABILIZE THE TREADMILL
Following all safety instructions, move the treadmill to the location in which it will be used. Allow a
distance of 12 inches (30cm) between the treadmill and any objects on either side. Allow a distance of
two meters from the rear of the treadmill to any object or surface.
After placing the unit where it will be used, check its stability. If there is even a slight rocking motion or
the unit is not stable, adjust the treadmill until the rocking motion ceases and its legs are resting firmly
on the floor.
NOTE: It is extremely important that the treadmills stability be correctly adjusted for proper operation.
An unbalanced unit may cause running belt misalignment.
POWER SWITCH
Located on the front side at the base of the treadmill, the ON/OFF switch has two positions:
"I" (one) for ON and "0" (zero) for OFF.
CENTERING THE BELT
After installing and levelling the treadmill, check the belt to ensure that it is tracking properly. First, plug
the power cord into an appropriate outlet then, turn the treadmill ON.
Have one person stand on the platforms on either side of the treadmill frame. Do not stand on the belt
at this time. Press the power on button, and increase the speed to 6 kilometres per hour (KPH), using
the SPEED UP button (+).
- If the running belt moves to the right while it is running, have a second person using an “Alan key”turn
the left tension bolt (1) a quarter-turn clockwise, and then turn the right tension bolt (2) a quarter-turn
counter-clockwise. This action sets the running belt tracking back to centre of the roller.
- If the running belt moves to the left, turn the left tension bolt (1) a quarter-turn counter-clockwise and
then turn the right tension bolt (2) a quarter-turn clockwise to start the running belt tracking back to
centre of roller.
- If the running belt is running straight but is lose adjust both the left and right tension bolts (3).
- Repeat these adjustments until running belt appears to be centred. Allow the belt to continue running
for several minutes to be sure that the tracking is stabilised.
NOTE: Do not exceed one full turn of the adjusting screws in either direction. If, after one full turn, the
belt does not track properly, contact Customer Service.
WARNING: Make sure that there is 1.9 metres of clearance behind the treadmill.
WARNING: Insure that the power cord does not contact the running belt or get pinched between the
frames, lift arms or the wheels; failure to follow this warning may result in serious injury.

Product Manual - Treadmill
170914105200
6
6
Using your Treadmill
Navigating the control panel
1. Plug in the power, the treadmill will automatically be in standby mode.
2. Press the MODE button to toggle through the options;
a. Scan; Scan mode cycles through the below options automatically.
b. Speed; Speed the treadmill is currently set on.
c. Time; Current time spend on program.
d. Dist.(Distance); Shows how many Km’s you have travelled.
e. Cal; Shows an estimate of how many calories you have burnt.
Manual program mode
1. Select speed
2. Using the speed buttons (+) and (–) options select a speed for your workout.
Pre-set program mode
To begin a pre-programed workout the treadmill must have the power button switch in on “ON”position and
be in standby mode.
1. Press the mode button once.
2. Press the speed buttons (+) and (–) options to toggle thought the menu and select a workout
program (P1-P3).
3. Press the mode key again.
4. Select a time (minutes) using the speed buttons (+) and (–) options.
5. Press the Start button (“On”/ “Off”) on the control panel.
NOTE! All programed workouts include a warm up and cool down which is included in any time you select.
P1 –Program 1; Low intensity workout.
P2 –Program 2; Medium intensity workout.
P3 –Program 3; High intensity workout.

Product Manual - Treadmill
170914105200
7
7
Storage
Maintenance
NOTE: Safety of the equipment can be maintained only if the equipment is examined regularly for
damage or wear. Keep the equipment out of use until defective parts are repaired or replaced. Pay
special attention to parts that are subject to wear, as outlined below.
The following preventive maintenance tips will keep the Treadmill operating at peak performance:
- Clean the display console and all exterior surfaces regularly with mild soap and water or a mild
household cleaner. Use only a soft cotton cloth. Apply cleaner to the cotton cloth and before cleaning.
- DO NOT use ammonia or acid based cleaners. DO NOT use abrasive cleaners.
- DO NOT use paper towels, DO NOT apply cleaners directly to equipment surfaces.
- Check operation of the emergency stop system once a week.
- Check the operation of the stop button once a week.
- Inspect and vacuum the area directly surrounding and under the unit regularly.
- Vacuum around the running belt regularly to keep debris from accumulating.
- Inspect exterior parts regularly for wear, particularly the running belt, deck and line cord.
- Check to make sure the unit is properly levelled.
- Check the position (centring) of the running belt.
NOTE: When cleaning the exterior of the unit, a non-abrasive cleaner and soft cotton cloth are strongly
recommended. At no time should cleaner be applied directly to any part of the equipment; use non-
abrasive cleaner on a soft cloth and then wipe the unit.

Product Manual - Treadmill
170914105200
8
8

Product Manual - Treadmill
170914105200
9
9
Troubleshooting
Malfunction.
Probable Cause
Solution
No Power.
On/Off Switch.
Turn the switch to the ON position.
Insufficient power source.
Plug treadmill into a 15 amp circuit.
Reset house circuit breaker.
Damaged power cord.
Have a licensed electrician replace the cord.
Power cord improperly seated in socket
Inspect power connection at wall outlet for
damage. Have a professional check the
power outlet.
Running Belt slips off
centre.
Uneven floor surface.
Position the treadmill on a level surface.
Check running belt & re-tension as required.
See section on "HOW TO POSITION AND
STABILIZE THE TREADMILL"
Maximum speed is
reduced.
User is pushing the running belt. This
occurs when the runner is running faster
than the running belt will travel, with the
result of the running belt being pushed
with the runner's feet.
Instruct users not to push the running belt in
either direction.
User is stalling the running belt. This will
occur with heavier users at lower running
belt speeds. The running belt will "stall" if
the user is traveling slower than the
running belt speed.
Running belt/deck malfunction. The deck
laminate is worn through or the
underside of the running belt is glazed
over (hard / glossy)
Replace belt and deck.
Insufficient power source.
Plug treadmill into a standard 240V 50Hz
household power outlet.
Rubbing sound from
underneath machine.
Foreign objects may be stuck underneath
the machine.
Inspect underneath running belt and
machine. Remove and debris or objects that
may cause interference with the treadmill.
Insufficient power source.
Plug machine into a standard 240V 50Hz
household power outlet.
Display does not
illuminate when
machine is powered
on.
Loose connection.
Check all electrical connections for proper
attachment.
Unit resets randomly
or pauses
Insufficient power source.
Plug treadmill into a standard 15amp 240V
household power outlet.
Damaged ground prong on power cord.
Have a licensed electrician replace the cord.
Emergency stop magnet not engaged.
Re-engage the emergency stop magnet.
Towel or other item may be making
contact with stop switch while user is
running.
Move all possible obstructions off the
display console and handlebar.

Product Manual - Treadmill
170914105200
10
10
Specifications
HPF-TREADMILL-08
Rated Power: 600W (.08HP)
Motor: 500W
Weight Capacity: 120kg
LCD display: Speed / Dist./Time/Cal./Scan
Speed: 1.0KM/H~6.0KM/H
Run-belt width: 32cm
Run-belt length: 100cm
Safeguard System: Emergency Stop Key

Product Manual - Treadmill
170914105200
11
11
Appendix
© Copyright 2012 - Mills International Trading Pty Ltd.

Some experts believe the incorrect or prolonged use of almost any
product could causeserious injury or death. For information that
may reduce your risk of serious injury or death consult thepoints
below and additionally, the information available at
www.datastreamserver.com/safety
- Consult all documentation, packaging and
product labelling be fore use. Note that some
products feature online documentation which
should be printed and kept with the product.
- Check product for loose / broken / damaged /
missing parts, wear or leaks (if applicable) be fore
each use. Never use a product with loose / broken
/ damaged / missing parts, wear or leaks (if
applicable).
- Products must be inspected and serviced (if
applicable) by a qualified specialist every 6
months assuming average residential use by a
person of average weight and strength, ab ove
average technical aptitud e, on a property
matching average metropolitan specification.
Intended use outside these guidelines could
indicate the product is not suitable for intended
use or may require more regular inspection or
servicing.
- Ensure all possible users of the p roduct have
completed an industry recognised training course
before being given access to the product.
- The product has been supplied by a general merchandise
retailer that may not be familiar with your specific applic ation or
your description of the application. Be sure to attain third party
approval for your application from a qualified specialist before use
regardless of prior assurances by the retailer or its representatives.
- This product is not intended for use where fail-safe operation is
required. As with any product (take an au tomobile, aircraft,
computer or ball point pen for example) there is always a small
chance of a technical issue that needs to be repaired or may
require replacement of the product or a part. If the possibility of
such failure and the associated time it takes to rectify could in any
situation inconvenience the user, business or employee or could
financially affect the user, business or employee then the product
is not suitable for your requirements. This p roduct is not for use
where incorrect operation or a failure of any kind, including but
not limited to a condition requiring product return, replacement,
service by a technician or replacement of parts could cause a
financial loss, loss of employee time or an in convenience
requiring compensation.
- If this item has been purchased in error considering the points
above simply contact the retailer directly for details of their
returns policies if required.