MyTrendyPhone 224164 User manual

Time Projection LED Alarm Clock with
FM Radio

1. Time
2. Radio memory
3. Alarm 1 on
4. Alarm 2 on
5. Sleep
1. Projector
2. Battery cover
3. MicroUSB port
4. USB port

1. Projector
2. Up/project
3. Alarm 1/2
4. Set button
5. Snooze/Dimmer
6. Radio/Sleep
7. Volume
8. Down
Startup:
Before the first use, please remove the plastic insulator tab from the battery
compartment, connect the AC/DC adapter to the power supply and the other end to the
microUSB port of the clock.
Note:
When the power is off, the LED clock won't work, the battery only retains the basic
settings.
Time setting:
1. Press and hold for 3 seconds the Set button, the hour digits flash, press Up/Down
button to set hour (long press Up/Down button will accelerate at high speed).
2. 1. Press the Set button, the minute digits flash, press the Up/Down button to set the
minute (long press Up/Down button will accelerate at high speed).
3. Press the Set button, the display screen shows 24H and flashes, press the Up/Down
button to select 12H or 24H time format.
4. Press the Set button, the display shows 09, and flashes, press the Up/Down button to
select the snooze time from 5 to 60 minutes.
5. Press the Set button, or without any operation within 20 seconds, it will exit the
current setting mode.

Alarm setting:
1. Press the Alarm (AL) button, the Alarm 1 LED and the hour digits will flash, press the
Up/Down button to set hour duration.
2. Press the Alarm (AL) button to set minutes, press the Up/Down button to set minute
duration
3. Press the Alarm (AL) button, LED displays OFF, press the Up/Down button to select
alarm mode ("rd"-wake-to-radio; "bu"-wake-to-buzzer, "OFF"-alarm off)
4. If you need a second alarm clock, please repeat steps 1 and 3
5. Press the Set button, or without any operation within 20 seconds, it will exit the alarm
setting mode.
When alarm 1 or 2 is sounding, the related Alarm 1 or Alarm 2 LED flashes, press the
Radio/Sleep or AL button to stop the alarm, and it will sound the following day. When
the alarm is sounding, press Snooze/Dimmer, the alarm will be snoozed (default snooze
time is 9 minutes).
FM Radio setting:
1. To turn on the radio press the Radio/Sleep button, the display shows On, then the
radio frequency readings in Mhz
2. Press the Up/Down button to turn the radio to the desired station
3. Press and hold the Up/Down button to scan for the next clear station
4. Press the Volume (VOL) button, the display shows L00, press the Up/Down button to
adjust the volume from L00 to L15
5. Press the Snooze/Dimmer button to turn off the radio
Sleep timer:
1. Press the Radio/Sleep twice to enter the sleep mode, then the sleep LED "SL" and
sleep time 05 (5 minutes) appear on the display
2. Press the Radio/Sleep to adjust the sleep timer from 5/10/15/30/45/60/75/90/Off
3. When the display screen changes back to show the time, press the Radio/Sleep
twice to show the sleep remaining time
4. The radio will play for the programmed sleep time and then turns off automatically
Projection setting:
1. In the clock mode, press the Up button to turn on the projection (bright), then press
again to adjust the brightness of the projection (bright - slightly bright - off)
2. When the projection is on, press and hold the UP button to revolve the projection
view. Long press the Project button to rotate the projection 180 degrees

Brightness control:
In the clock mode, press the Snooze/Dimmer button to adjust the brightness of the LED
display (Slightly bright (default), Bright, Off, Dim)
2. Press and hold for 2 seconds the Snooze/Dimmer button to select the on/off Auto
mode (AU)
Charging your device:
Connect the charging cable of your device to the USB port at the back of the clock, then
plug the other end to your device - the clock will charge your device.
Factory reset:
Open the battery cover and remove the battery, the clock is restored to the default
settings. Insert the battery, and set the functions.