N Brown Group Bali Egg Pod Chair User manual

No. People Assembly Time
15 Minutes
Assembly Instructions - Please keep for future reference Cat No. WT385
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the JDW customer helpline: 0871 231 2000
Bali Egg Pod Chair

Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• Check you have all the
components listed on the
next pages.
• Remove all ttings from the
plastic bags and seperate
them into their groups.
• Keep children and animals
away from the work area,
small parts could choke if
swallowed.
• Do not use if parts are
missing.
• Make sure you have
enough space to lay out
the parts before starting.
• Assemble the item as close
to its nal position (in the
same room) as possible.
• Assemble on a soft, level
surface to avoid damaging
the unit or your oor.
• Keep away from re.
• Do not leave child
unattended when they use
the chair.
• Please set up on dry at
ground.
• We do not recommend
the use of power drills/
drivers for inserting screws
as this could damage
the unit. Only use hand
screwdrivers.
Care and Maintenance
• From time to time check
that there are no loose
screws on this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
• Recommended: Sponge
Clean Only.
• Only use the accessories
or spare parts approved by
the manufacturer.
If you need help or have damaged or missing parts, call the JDW
customer helpline: 0871 231 2000
If you are unhappy with the product and wish to return it,
please follow the retailer’s returns procedure.

Components - Panels
Please check that you have all the components listed below before constructing your item.
Part No Description Qty
A Chair Frame 1
B Front Legs 2
C Rear Legs 2
D Screws 12
E Washers 12
F Allen Key 1
Assembly Instructions
A
C
E
B
D
F
• Lay part A on it’s side
and line up parts B and
C as shown.
• Insert part D into part
E and screw into the
base of part B.
• Tighten and secure
with part F.
• Repeat process for
part C.