N Brown Group Keywest Set User manual

No. People Assembly Time
Assembly Instructions - Please keep for future reference Cat No.
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the JDW customer helpline: 0871 231 2000
WT371
Keywest Set
30 - 60
Minutes

Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• Check you have all the
components and tools
listed on the next pages.
• Remove all ttings from the
plastic bags and seperate
them into their groups.
• Keep children and animals
away from the work area,
small parts could choke if
swallowed.
• Make sure you have
enough space to lay out
the parts before starting.
• Do not stand or put weight
on the product, this could
cause damage.
• Assemble the item as close
to its nal position (in the
same room) as possible.
• Assemble on a soft, level
surface to avoid damaging
the unit or your oor.
• We do not recommend the
use of power
drills/drivers
for inserting
screws as this
could damage
the unit. Only use hand
screwdrivers.
Care and Maintenance
• To clean wipe with a damp
cloth, do not use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
If you need help or have damaged or missing parts, call the JDW
customer helpline: 0871 231 2000
If you are unhappy with the product and wish to return it,
please follow the retailer’s returns procedure.

Exploded View - Chair
Exploded View - Co󰀨ee Table

Components - Panels (for each Chair)
Please check that you have all the components listed below before constructing your item.
Part No Description Qty
A Back Support 1
B Seat 1
C Back Cushion 2
D Seat Cushion 7
Components - Fixings
Please check that you have all the components listed below before constructing your item.
Tools Required
In the Box
E Long Screw 2
F Short Screw 2
G Washer 4
H Allen Key 1
Allan Key
Table
(No assembly required)
Canopy
(No assembly required)
Chair
(assembly required)

Assembly Instructions - Chair
Step 1
• Lay part A upside
down and line up
part B as shown.
• Line up part F and
part G and place
into the hole.
• Tighten and
secure with part H.
• Line up part E and
part G and place
into the hole.
• Tighten and
secure with part H.
• Repeat with other
sections circled.
Step 2
• Place parts C and
D in place, as
shown
C
D

Operating Instructions - Table
Step 1
• Lift table top out
from the base.
• Rotate the Table
top 90 degrees.
• Line up the locks
on the table top
with the locks on
the inside of the
base.
Step 2
• Pull the latch
upwards to lock
the table top in
place.
• Repeat for each
corner of the
table.
900
1
2

Step 3
• To disasemble
the table reverse
steps 1 and 2
CARE AND CLEANING:
1. TO CLEAN,WIPE WITH DAMP CLOTH.DO NOT USE BLEACH,ACID SOLVENTS OR ABRASIVE CLEANERS
OR FRAME PARTS.
2. DURING VARYING WEATHER CONDITIONS AND WINTER PERIOD,WE STRONGLY RECOMMEND THAT
IT CAN BE.STORED IN A DRY AREA
WITH A SUITABLE COVER BEFORE STORAGE,PLS INSURE IT IS CLEAN AND DRY.
3. IN THE EVENT OF BARE METAL SHOWING DUE TO SCRATCH,IT IS PREFERRED TO TREAT WITH A
RUST REPELLING VARNISH OR SIMILAR.
4. PERIODICALLY CHECK AND ENSURE THAT ALL THE SCREWS ARE COMPLETELY TIGHTEN.
5. A MATCHING FURNITURE COVER IS STRONGLY RECOMMENDED TO EXTEND THE USAGE LIFE-SPAN.
900

Manchester
M60 6ES