NACO 170A User manual

USER’S MANUAL
NACO170D/ATFT-LCD MONITOR
ALL IN ONE DISPLAY.INC.
www.aodlcd.com

•Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
◎Reorient or relocate the receiving antenna.
◎Increase the separation between the equipment and receiver.
◎Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
◎Consult the dealer or an experienced radio/TV technician for
help.
Modifications not expressly approved by the manufacturer
could void the user's authority to operated the equipment
under FCC rules.

TABLE OF CONTENTS
0. Connection To the Monitor
1. Installation
2. Features
3. Plug and Play Function
4. Safety Precautions
5. Contents Of the Retail Package
6. OSD (On-Screen-Menu)
7. OSD Controls
7.1 Color
7.2 Picture
7.3 Function
7.4 OSD Menu
7.5 Miscellaneous
8. Troubleshooting
9. Specifications
10. Video Mode

0. Connection To the Monitor
D-SUB
1. Installation
•Connect the signal(VGA) cable to the VGA port of computer. Tighten the
two thumbscrews by turning clockwise.
•NACO 170D will provide DVI cable for the customer in retail package.
•You can adjust the connection for your PC environment.
•Plug the DC cord of the AC adapter to the power connector and the plug
the end of AC adapter to and electrical outlet socket(110V/220V)
•Connect DC cord of adapter (12V DC) to the monitor..
2. Features
•NACO 170D/A is 17”SXGA LCD monitor and support up to 75Hz.
•You can adjust brightness, contrast, horizontal & vertical positions by OSD
menus and use auto adjust function for instant adjustment.
•High-qualified LCD Controller inside
•Compact space saving design and power saving mode
•100% compatible with Windows PC environment without the installation of
driver CD or software program.
NACO170A
D-SUB
NACO 170D
DVIDC 12V
DC 12V

3. Plug and Play Function
NACO 170D/A can be installed and connected automatically to any computer
systems without driver CD or software programs. Monitor will recognize the
optimized value of video mode by DDC(Display Data Channel) method that
makes the graphic card of computer to communicate with the monitor. NACO
170D/A supports VESA DDC 1/2B.
We strongly recommend that you carefully read this User’s Manual before operating your LCD
monitor. FOLLOW INSTRUCTIONS in this manual.
Please read and comprehend all using directives before use this machine.
Power
—Use the type of power indicated on the marking label.
●Adapter
—Only use an adapter designed of the LCD monitor.
Plugs
—Do not remove any of the prongs of the monitor's three-pronged power plug.
—Disconnect the power plug from the AC outlet if you will not use it for an indefinite period of time.
●Power and extension cords
—Use the proper power cord with ground conductor
—Do not overload wall outlets or power cords. Ensure that the total of all units plugged into the wall
outlet does not exceed 7 amperes.
—Do not allow anything to rest on the power cord. Do not locate this product where persons will
walk on the cord.
Care and maintenance
●Slots and openings in the cabinet are provided for ventilation. Do not block or cover these openings.
Do not push objects of any kind into cabinet slots or openings. The screen surface is easily scratched.
Do not use paper towels to clean the display. Avoid touching it with your fingers, pens, or pencils.
Turn off the AC adapter and the monitor over long periods when not in use.
4. Safety Precautions

5. Contents Of the Retail Package
Monitor
User’s Maunal AC/DC Adaptor Power Cord VGA Cable
DVI Cable(Only for NACO 170D )

Buttons Function Status Hot key
Power Turns the power ON or Off ON/OFF
LED
Selects OSD Menu
UP Launches OSD Menu
or Add values
Indicate working Status
Launches OSD Menu or
down values Moves to OSD Menu
Moves to OSD Menu
6. OSD (On-Screen-Menu)
PowerMenu Enter
ENTER
ON / OFF OSD menu
Adjust Brightness
Adjust Contrast
Down Up
DOWN
AUTO ADJUST
MENU
Green(ON) /Red (Stand-By)
Flashing(OFF)

7. OSD Controls
7.1 Color
7.2 PICTURE
COLOR
Contrast
Brightness
Gamma Correct
Color Temp
Color Adjust
Exit
1280 x 1024 60Hz
MENU àSelect COLOR àUP / DOWN KEY
1) Adjust Contrast
3) Adjust Color
4) Adjust Color Temp
5) Adjust R.G.B value
2) Adjust Brightness
PICTURE
H.Position
V.Position
Sharpness
Phase
Clock
Exit
1280 x 1024 60Hz
MENU àSelect PICTURE àUP / DOWN KEY
1) Adjust Horizontal Position
3) Adjust Sharpness
4) Adjust Phase
5) Optimizing Image and eliminates Noise
2) Adjust Vertical Postion

7.4 OSD MENU
7.5 MISCELLANEOUS
7.3 FUNCTION
FUNCTION
1280 x 1024 60Hz
Auto Adjust
Auto Position
Auto Phase
Auto Clock
Auto Color
Exit
MENU àSelect FUNCTION àUP / DOWN KEY
1) Runs Auto-Adjust Function for optimizing
3) Automatically adjusts phase
4) Automatically adjusts image and eliminates noise
5) Automatically adjusts color status
2) Automatically adjusts screen position
OSD MENU
1280 x 1024 60Hz
Language
OSD H.Position
OSD V.Position
OSD Timer
Translucent
Exit
MENU àSelect OSD MENU àUP / DOWN KEY
1) Select Language
3) Adjust OSD Vertical Postion
4) Select OSD Auto Timer
5) Select transparent status of OSD menu
2) Adjust OSD Horizontal Postion
MISCELLANEOUS
1280 x 1024 60Hz
Signal Source
Mode Select
Reset
Exit
MENU àSelect MISCELLANEOUS à
UP / DOWN KEY
1) Select Signal Source
3) Go to Factory Setting
2) Select Mode

8. Troubleshooting
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The monitor does not respond after you turn on the system.
Make sure that the monitor is turned on. Turn off the power and check the monitor’s
power cord, AC adapter, and signal cable for proper connection.
Appear the “No Input the Signal"
Check the connecting of the audio cable between the monitor and the computer.
Appear the “Input Not the Supported"
Input signal are insuperable, refer the “Video Modes”
The appearance is not at the screen center.
Use “AUTO ADJUST”or manually adjust “PHASE”and “CLOCK”,
refer the Controls section.
The characters on the screen are too dim or too bright
Choose fit color temperature, use “AUTO COLOUR ADJUST or manually adjust
“RGB ADJUSTMENT, refer the Controls section.
Interference appear at the view of “CLOSE WINDOWS”
Use the “AUTO ADJUST”or manually adjust the values of “PHASE”and
“CLOCK”, refer the Controls section.Check the resolutin status is not up to 75Hz
and adjust it by 60Hz and then you can get the optimized images by using Clock
and Phase functions

9. Specifications
Dispaly
Type 17”Color Active Matrix TFT LCD
Color 16.2M Color
Pixel 0.264 x 0.264 mm
Screen Size 337.92 (H) x 270.336 (V) mm
Resolution (Max) 1280 x 1024 at 60 to 75Hz
Contrast Ratio 500:1
Brightness 300 cd/m2
Video
Frequency Horizontal: 56 ~ 75Hz
Vertical: 31.5 ~ 80KHz
Compatibility
Plug and Play VESA DDC 1/2B
Compatibility VESA / IBM / MAC
Power VESA Standard, DPMS
Operation Environment
Power Consumption Operation Mode: 35 watt max.
Stand-by: 4 watt max.
Temperature Operation Mode : 0 ºC ~ 40 ºC
Stand-by: -20 ºC ~ 60 ºC
Humidity Operatjion Mode: 10% ~ 85% R.H.
Stand-by: 90% R.H. Max.
User’s Mode
OSD Key Menu / Enter / Down / Up / Power
Dimension & Weight
Dimension Retail Box: 435 (W) x 510 (D) x 154 (H) mm
Weight 5 kgs

VESA Standard
Mode*1 Pixel freq.Resolution
640 x 350
Industry Standard
VESA Standard
IBM VGA 3H720 x 400
640 x 480
640 x 480
VESA Standard
VESA Guidelines
640 x 480
800 x 600
VESA Standard
VESA Standard800 x 600
800 x 600
Refresh rate H-freq.
VESA Guidelines1024 x 768
VESA Standard
VESA Standard1024 x 768
1024 x 768 60KHZ
56.5KHz
VGA
VGA
VGA
VGA
VGA
SVGA
SVGA
SVGA
XGA
XGA
XGA
48.4KHz
46.9KHZ
48.1KHz
37.9KHz
37.5KHZ
37.9KHz
31.5KHz
31.469KHZ
31.47KHz
75HZ
70Hz
60Hz
75HZ
72Hz
60Hz
75HZ
72Hz
60Hz
59.940HZ
70Hz
78.750MHZ
75.000MHz
65.000MHz
49.500MHZ
50.000MHz
40.000MHz
31.500MHZ
31.500MHz
25.175MHz
25.175MHZ
25.175MHz
Remarks*1
10. Video Mode
♦Below values are set by Manufacturer
SXGA
SXGA
1280 x1024
1280 x1024 75HZ
60Hz 64KHZ
80KHZ
108MHZ
135MHZ
VESA Standard
VESA Standard