NADAIR KIT-06-30-35-40-360 User manual

User Manual
Carpet beater attachment kit
Model Number:
Since1980
5
KIT-06-30-35-40-360

Index
1. Kit inclusion .................................................................................................................. 3
2. High-voltage hose ......................................................................................................... 4
3. Carpet beater specification ............................................................................................ 5
3. High-Voltage wand specification ..................................................................................... 5
5. How to use the carpet beater .......................................................................................... 6
6. Low-Voltage wand specification .................................................................................... 7
7. Included cleaning tool .................................................................................................... 8
8. Easy Storage ............................................................................................................. 9
9. Trouble shooting ........................................................................................................... 8

1. INCLUDED IN THE KIT
1
5
9
10
37
6
8
2
5’’
10’’
4’’
12’’
4
14’’
1. High-voltage hose with dual control switch
2. Adjustable Low-Voltage wand
3. Adjustable High-Voltage wand
4. Electrical carpet beater
5. 12’’ Swiveling Floor brush
6. Dusting Brush
7. Upholstery Brush
8. Crevice Tool
9. Accessory Bag
10.Chrome hose hanger
* Product dimensions may vary
ADJUSTABLE FROM 25.5’’ TO 38’’ ADJUSTABLE FROM 25.5’’ TO 38’’

2. HIGH-VOLTAGE HOSE
2.2 Connecting the hose to the wall inlet
The hose end cuff must be connected as shown in the picture below. The black part on the end cuff must be well
aligned with the 2 pins inside the inlet (C). The plastic square must be facing up (D).
2.1 Compatibility
The hose is compatible with most wall inlets. Inlets must have a 1.5’’ inner diameter (A) in order for the hose to
fit, and must have 2 low-voltage pins/metal prongs (B) in order to turn the vacuum ON and OFF from the switch
located on the hose handle.
2.3 Dual switch control
1. Suction activation only: When using floor
brush and accessories
2. Turn the unit off
3. Suction and carpet beater activation
2.4 72’’ pigtail (power cord)
The pigtail must be plugged into a stan-
dard 110-120 V outlet to power the electric
carpet beater. The switch must be set to
level II as demonstrated in step 2.3.
C
A B
D
1.
2.
3.

3. CARPET BEATER AND WAND SPECIFICATIONS
To remove the hose
push on this button and
pull on the the hose
It will come out
To extended the
Press here to adjust the
beater height
LED Light
Press here to
unlock the neck
Press here to
realease the wand
wand, push this button
at the same time.
To activate the carpet beater, simply put the hose switch on
level 2 and the beater will automatically start
5 Adjustable heights
Extend from 25.5’’
to 38’’

5. INSTRUCTIONS
Connecting the wand to the electric carpet beater
Connecting the high-voltage hose to the wand
Carpet beater (Powerhead) port
The electric carpet beater (power-
head) has male ports to connect
to the electric wand.
Hose port
The hose nozzle must have two
female ports in order to connect
it to the wand.
Wand ports
Our electric wand has 2 male
ports.
Connection
Align the female ports from the
hose nozzle with the male ports
on the wand and push the hose
nozzle into the wand.
Wand port
The electric wand has female ports
to connect to the electric carpet
beater (powerhead).
Connection
To connect the wand to the electric
carpet beater, align the female ports
(from the wand) and the male
connectors (from the carpet beater),
then push the wand into the beater.
5.1 Carpet beater
port 5.2 Electrical wand port 5.3 Connection or the wand to the beater
5.4 Hose nozzle port 5.5 Electrical wand
port 5.6 Connection of the hose nozzle to the wand

To extend the wand, simply push on the button (E) and pull on the wand (F) at the same time
G
F
E
Align the hose nozzle button (G) with the lock button on the wand (H) and push the
nozzle in the wand until you here a “click”
Insert the other end of the wand into the port on the brushes
6. LOW-VOLTAGE WAND
6.1 How to extend the wand
6.2 How to connect the wand to the hose nozzle
6.3 How to connect the different attachment tools
H

Ideal for hard surfaces. Made of horse hair - Will not scratch your floor
7. INCLUDED CLEANING TOOLS
7.1 12’’ Superior Floor brush
Made of horse hair - Delicate and soft on furniture
7.2 Dusting brush
Made of horse hair - Perfect for delicate furniture
7.3 Upholstery brush
Ideal to clean cracks and crannies
7.4 Crevice tool
12’’
4’’
5’’
10’’
* Product dimensions may vary

8. EASY STORAGE INCLUDED
8.1 Chrome hose hanger
8.1 Accessory bag
4.75’’ 4.75’’
4.5’’
The perfect accessory to store your hose neatly.
* Product dimensions may vary
20’’
Crevice tool compartment
Floor Brush compartment
Small brushes compartment
Wand storage compartment
Easily store your accessories without making a mess in your storage room.

Service problems that appear to be major can often be solved easily.
You can be your own troubleshooter by reviewing this guide.
Problem Check Solution
CHECK THESE FIRST
4- TROUBLESHOOTING
Power nozzle
won’t turn ON
receptacle on nozzle.
reset reset.
Power nozzle
still does not
operate properly
13. TROUBLE SHOOTING GUIDE