Nakamichi BT HP01 User manual

Contents
Important Safety Instructions -------------------------------------2
BT HP01 --------------------------------------------- ----------------4-
BT HP01 Anatomy ----------------- ------------------------- -------5- -
Adjusting the headband -------------------------------------------6
Connecting the BT HP01 to an audio source -----------------------6
Disconnecting the BT HP01 -------------------------------------------7
Switching the BT HP01 on/off ----------------------------------------7
Changing the volume -----------------------------------------------8
Remote-controlling the connect devices from ----------9BT HP01
Managing Calls ----------------------------------------------------10
Cleaning and maintaining the BT HP01 ----------------------------10
Troubleshooting ---------------------------------------------------11
Specifications ------------------------------------------------------13
LIMITED WARRANTY (U.S Only) ----------------------------------14
Product Code -------------------------------------------------------15
Page 1

Important Safety Instructions
. Read this user manual carefully and completely before using the
product.
. Always include this user manual when passing this product on to
third parties.
. Do not use a defective product if found.
Preventing damage to health and accidents
. Do not listen at high volume levels for long periods of time to
prevent damages to the ear.
. Always maintain a distance of at least 3.94” (10 cm) between the ear
cups and the cardiac pacemaker or implanted defibrillator since the
product generates permanent magnetic fields.
. Keep the product, accessory and packaging parts out of reach of
children and pets who could swallow smaller pieces.
. Do not use the product in an environment that requires your special
attention (e.g. in traffic).
Preventing damage to the product and malfunctions
. Always keep the product dry and do not expose it to extreme
temperatures (hairdryer, heater, extended exposure to sunlight, etc.)
to avoid corrosion or deformation.
. Only clean the product with a soft, dry cloth.
. Switch off the product after use to conserve battery power.
Intended Use
The BT HP01 is a wireless Bluetooth headphone designed to work
with mobile phones or other Bluetooth devices/ Bluetooth compliant
devices and allows for wireless music streaming or phone calls.
“Improper use” means using the product
. other than as described in this user manual,
. under operating conditions which differ from those described in this
user manual.
Page 2

Safety instructions for the Lithium –Polymer
battery Pack
If abused or misused, the battery pack may leak. In
extreme cases, it may even present an explosion or fire
hazard.
. Heat generation
. Fire development
. Explosion
. Smoke of gas development
Please note that NAKAMICHI does not accept liability for
damage arising from abuse or misuse.
I Keep away from children
ii Immediately remove the battery from an obvious
defective product.
iii Dispose the battery pack at special collection points
or return it to a specialist dealer.
iv When not using the device for extended periods of
time. Please charge it before usage.
v Only charge the device at ambient temperature
between 10⁰C/50⁰F and 40⁰C/104⁰F.
vi Do not heat above 70⁰C/ 158⁰F, e.g. do not expose to
sunlight or throw the device into a fire.
vii Do not dismantle or mutilate the device
viii Do not expose to moisture.
Page 3

BT HP01 – BLUETOOTH HEADPHONE
The BT HP01 is a headphone which allows for wireless music
streaming when used with mobile phones or other Bluetooth
devices/Bluetooth compliant devices.
Bluetooth
The BT HP01 complies with the Bluetooth 3.0 standard. Via its
Bluetooth interface, it can be connected to a wide variety of
Bluetooth enabled devices. Bluetooth wireless technology
allows the BT HP01 to link with your Bluetooth enable devices
(e.g. mobile phone, MP3 player, PC or tablets) with a range
of up to 30feet (10 meters).
Additional features
. Great for travel: comfortable, rugged and twistable
construction
. Optional connection via audio for music enjoyment with
Bluetooth technology
Page 4

CHARGE
BT HP01’s Anatomy
1. USB interface for charging
2. Volume up (+)
3. Volume down (-)
4. Power on/off button
5. Microphone
6. Previous track
7. Play/pause button
8. Next track
1.
4.
5.
6.
7. 8.
3.
2.
Page 5

Adjusting the headband
For optimum transmission
quality, good noise attenuation
and best possible comfort, the
headband has to be adjusted to
properly fit your head:
. Wear the headset so that the
headband runs over the top of
your head.
. Adjust the length of the
headband so that
The ear pads rest comfortably
against your ears,
You feel an even and gentle
pressure around your ears,
A snug fitting of the headband
on the head.
Connecting the BT HP01 to an audio source
-------------------------------------------------------
CAUTION
Danger of malfunction due to radio waves!
The transmitted radio waves of mobile phones can impair the
operation of sensitive and unprotected devices.
Only use the headset in environments where wireless Bluetooth
transmission is permitted.
-------------------------------------------------------
The devices complies with the Bluetooth 3.0 standard.
When switching the device on for the first time, it will automatically
go into pairing mode. The device is waiting to be paired with a
Bluetooth enable device.
Press the On/Off button and keep it press until the LED
alternately flashes blue and red.
The LED will flash blue and red alternately to indicate the device is in
pairing mode.
Page 6

Pairing the BT HP01 with an audio source
If the device is connect to an audio source via Bluetooth, the LED will flash
blue three times and you will hear a beeping sound. This indicated the
device is now connected with the audio source.
If no device is found within approximately five minutes, the LED will flash
red three times . The device will automatically switch off.
Disconnecting the BT HP01
To disconnect the device from the audio source, you can switch off the
headset or by pressing the button once. The device will still retain the
audio source setting till the Bluetooth function is switch on again.
---- -- ------------- -- -- ----------- -- -- ------------- -- ---
WARNING
Danger of hearing damage!
Listening at high volume levels for long periods can lead to permanent
hearing defects.
Before putting the device on, set the volume to a low level.
Do not continuously expose yourself to high volumes.
---- -- ------------- -- -- ----------- -- -- ----------- -- -- ---
Switching the BT HP01 on
Press the On/Off button and keep it pressed until the LED flashes blue. You
will head a beep sound.
. When turning the device on for the first time, the device will automatically
go into a pairing mode.
. When the device is already paired to an audio source, the Bluetooth
connection is automatically connected to the an audio source.
. When the device is already paired with an audio source, but if the audio is
switched off or out of range, the device’s LED will flash blue.
Switching the BT HP01 off
. Press the on/off button and keep it pressed until the LED flashes red three
times.
. You will hear a descending beep. The Bluetooth connection is
automatically deactivated. The device switches off.
Page 7

Changing the volume
The BT HP01 allows you to change the volume of the audio signal
during a call or while listening to music:
V+ Incrementally increases the volume.
If you press the respective button briefly, the volume changes
incrementally, if you hold down the button, the volume changes
continuously.
When the minimum or maximum volume is reached, an
acknowledgement tone will be heard.
V- V+
Page 8
Buttons Functions
V- Incrementally reduce the volume.

Remote-controlling the connect devices from BT HP01
You can directly control any device support Bluetooth AVRCP profile
via the buttons on the device.
Please kindly refer to the instruction manual of your audio source for
information on whether your audio source supports the Bluetooth
AVRCP profile.
Remote-controlling the audio source from the BT HP01
If your headset has a Bluetooth connection to an audio source (e.g.
mobile phone, iPod, MP3 or CD player), you can use the BT HP01 to
remote-control the audio source as follows:
* These functions are not support by all connected Bluetooth devices.
>/||
|<< >>|
Page 9
B u t t o n s F u n c t i o n s
>/ I I Press once to pause or play the current track music.
|<< Press once to back track to the previous track music.
>>| Press once to skip to the next track music.