Nameek's Demetra Gedy 5125-13 User manual

1
Tools You May Need
Level
Tape
Measure
Drill
Screwdriver
x2 wall
anchor x1 allen wrench
x2 screw
Included Installation Hardware
Following these mounting instructions with the hardware included will be more than
sufficient to support wall mounted installation.
Installation Instructions
Wall Mounted Toilet Paper Holder

2
1. Disassemble
Put the included allen wrench into
the two screws on the bottom of
the body and turn clockwise to
disassemble the base from the
mounting piece.
2. Remove Bracket
Pull mounting bracket from toilet
paper holder.
3. Drill Anchor Holes
Identify installation location. Mark
mounting bracket on wall and drill
holes the size of the anchors.
4. Install Anchors
Tap anchors into predrilled holes.

3
7. Tighten Screws
Tighten two (2) screws with allen
wrench included by turning
counterclockwise.
5. Mount Bracket
Mount bracket with screws.
6. Mount Paper Holder
Install toilet paper holder over
mounting bracket.