NANHUA LF43 Series User manual

LF43 Series
•
•
•
•
•
•
•
＞
～
≥
≥
≥
≥
≥

LF43 Series
Installation and Operation
• Fix product to mount face by using M12 screws(not provided),
ensure mount surface is flat and has enough mechanical strength.
• Secure safety wire to suitable position, ensure the position has
enough mechanical strength.
• Connect cable L, N, PE to terminal blocks.
• Ensure cable connection is correct before power on.
• Cable is 16AWG three-core at least.
• No requirement of installation height.
Internal wiring (Lead wire type)
Caution
• Risk of corrosion. Cover material is polycarbonate, not allowed
to direct or indirect contact with industrial spirit banana oil,
isopropanol, carbon tetrachloride, cyclohexene, etc organic
solvent.
•High power LED light has high temperature on product surface
while operating, do not cover the product with any objectives. It
is suggest the distance more than 3 meters between product
and illuminated objective, prevent burns or fire.
• It is normal phenomenon that the lighting surface temperature
rising while it is operating.
• Turn off the power when repair or maintain the product, all
wiring should be done by a licensed electrician.

LF43 Series
Cold white 15°
Cold white 15°
Cold white 25°
Cold white 25°
Cold white 60°
Cold white 60°