nanny BM-02 User manual

• Monitors every breath your baby takes
• Triggers an alarm in the event of danger
• Safe, non-intrusive and may save
your baby’s life
• Detects SIDS (Sudden Infant Death Syndrome)
• Allows parents to sleep peacefully
• Certified by the European Union Authority
on Medical Devices
Relax, the Nanny is continuously watching over your sleeping baby!
Power 3 V, 2 x 1.5 V AA alkaline batteries
Average battery lifetime 6 months
Recommended weight of baby From min. 2 kg to max. 15 kg
Sensor pad 350 x 550 x 15 mm
Approvals EC certificate number MED 040093,
issued by ETI on 18th August 2004
IMPORTANT WARNING
The manufacturer does not
recommend buying or renting
a second-hand baby monitoring
product.
In the event of careless product
handling, the sensitivity of the sensor
can decrease possibly causing
unwanted alarms.
PACKAGE CONTENTS
Sensor pad, control unit,
extension cable, and a plastic,
wall-mount bracket.
SPECIFICATIONS
[email protected]
www.nanny.cz
NANNY BM-02 BABY RESPIRATION MONITOR
INSTALLATION
2
3
1

• NANNY carefully
monitors every breath
your baby takes via
a thin, hyper-sensitive
pad placed under
your baby’s crib
mattress.
• NANNY triggers an
alarm if your baby stops
breathing for more than
20 seconds or if the
breathing rate drops below
8 breaths per minute.
• NANNY can help
you save your baby’s
life if Sudden Infant
Death Syndrome
(SIDS) or other life-
threatening event
occurs (vomiting,
allergy, illness, etc.).
• NANNY allows you to sleep peacefully knowing that your loving
child is sleeping safe and sound.
• NANNY has no physical contact with the baby and its sensor
does not generate any form of electric field. Its passive sensing
device has no harmful effects on humans.
• NANNY has been approved by the European Medical Authority
and has been documented as saving the lives of many babies.
is a very sensitive device, capable
of carefully monitoring a sleeping baby’s breathing.
Please note that external vibrations (moving the bed, building vibrations,
or powerful air movements) can trigger the Nanny’s alarm.
Therefore, please be sure that the crib is not in physical contact
with another bed (which is used by another person) or in close contact
with any device that generates vibrations. If you move the crib
to a new location, be sure to test the Nanny before use.
Protect the sensor pad from physical damage
(impacts, falls, and bending can all damage the sensor).
indicates the baby’s breathing
indicates an ALARM
(combined with a siren sound)
indicates low batteries