NANO CAM NCP-DVRGPS User manual

USER MANUAL
FULL HD DASH CAM DVR
WITH GPS LOGGER
NCP-DVRGPS

Caution....................................................................................................................................................................... 5
Battery warning .......................................................................................................................................................... 5
Notes on Installation ................................................................................................................................................... 5
1 Introduction .............................................................................................................................................................. 6
1.1 Features ............................................................................................................................................................. 6
1.2 Package Contents .............................................................................................................................................. 6
1.3 Product Overview ............................................................................................................................................... 6
2 Getting Started ......................................................................................................................................................... 7
2.1 Inserting the Memory Card.................................................................................................................................. 7
2.2 Installing Car DVR............................................................................................................................................... 7
2.2.1 Adjust the device position ....................................................................................................................... 7
2.2.2 Connect to Power................................................................................................................................... 7
2.3 LED Indicator...................................................................................................................................................... 8
2.4 Powering the Car DVR On / Off........................................................................................................................... 8
2.4.1 Auto Power On / Off................................................................................................................................ 8
2.4.2 Manual Power On / Off and Reset........................................................................................................... 8
2.4.2.1 Manual Power On ................................................................................................................................... 8
2.4.2.2 Power Off................................................................................................................................................ 8
2.4.2.3 Reset the device ..................................................................................................................................... 8
2.5 Playing back Video on PC................................................................................................................................... 8
2.6 Initial Settings ................................................................................................................................................... 10
2.6.1 Formatting Inserted Micro SD Card........................................................................................................ 9
2.6.2 Set the Date / Time ............................................................................................................................... 10
2.7 Using the DVR .................................................................................................................................................. 10
2.7.1 Recording Video ................................................................................................................................... 10
2.7.2 Locked Recording................................................................................................................................. 10
2.7.3 Recording Screen ................................................................................................................................. 10
2.7.4 Video Mode .......................................................................................................................................... 11
2.8 Video Menu ...................................................................................................................................................... 11
2.8.1 Resolution............................................................................................................................................. 10
2.8.2 Loop Recording .................................................................................................................................... 11
2.8.3 WDR..................................................................................................................................................... 12

3
2.8.4 Exposure............................................................................................................................................... 13
2.8.5 Motion Detection................................................................................................................................... 13
2.8.6 Recording Audio ................................................................................................................................... 14
2.8.7 Date Stamp........................................................................................................................................... 14
2.8.8 G Sensor .............................................................................................................................................. 15
2.8.9 GPS...................................................................................................................................................... 15
3 Photo Mode ............................................................................................................................................................ 16
3.1 Photo Menu...................................................................................................................................................... 16
3.1.1 Capture Mode....................................................................................................................................... 16
3.1.2 Resolution............................................................................................................................................. 16
3.1.3 Sequence ............................................................................................................................................. 17
3.1.4 Quality................................................................................................................................................... 17
3.1.5 Sharpness............................................................................................................................................. 18
3.1.6 White Balance....................................................................................................................................... 18
3.1.7 Colour................................................................................................................................................... 19
3.1.8 ISO ....................................................................................................................................................... 19
3.1.9 Exposure............................................................................................................................................... 19
3.1.2.0 Anti Shaking.......................................................................................................................................... 19
3.1.2.1 Quick Review ........................................................................................................................................ 21
3.1.2.2 Date Stamp........................................................................................................................................... 21
3.2 Setting Menu .................................................................................................................................................... 22
3.2.1 Date / Time ........................................................................................................................................... 22
3.2.2 Auto Power Off ..................................................................................................................................... 22
3.2.3 Beep Sound.......................................................................................................................................... 23
3.2.4 Language.............................................................................................................................................. 23
3.2.5 Frequency............................................................................................................................................. 24
3.2.6 Lamp Setting ........................................................................................................................................ 24
3.2.7 Format .................................................................................................................................................. 25
3.2.8 Screen Saver ........................................................................................................................................ 25
3.2.9 Delayed Shutdown................................................................................................................................ 26
3.2.1.0 Default Settings..................................................................................................................................... 26
3.3 Playback Screen............................................................................................................................................... 27

4
3.4 Playback Menu................................................................................................................................................. 27
3.4.1 Deleting Photos & Videos...................................................................................................................... 27
3.4.2 Locking and Unlocking Photos and Videos ........................................................................................... 28
3.4.3 Slide Show............................................................................................................................................ 28
3.3.4 Deleting Files......................................................................................................................................... 28
3.5 Playing Video & Viewing Pictures ...................................................................................................................... 29
3.5.1 Playback ............................................................................................................................................... 29
4 Menu Tables....................................................................................................................................................... 30-31
Warranty................................................................................................................................................................... 31

5
Caution
•Ensure you are using your Car DVR within your countries’ road laws. Please make sure you are familiar with your local road legislation
before use.
•Avoid leaving your Car DVR in direct sunlight for extended periods of time in an unventilated space.
•Please set time and date before you use this device to record.
•The notifications given by the Car DVR are suggestions only, please drive to the actual conditions.
•The results of GPS positioning are only for reference. The Car DVR will lose GPS positioning abilities when signal is blocked (eg driving
through tunnels, enclosed car parks).
•GPS positioning accuracy may vary depending on weather and surroundings such as dense cities, tunnels, or forests.
GPS satellite signals cannot pass through most solid materials. Tinted windows may also affect the GPS signal.
•The values displayed in this system, such as speed, position, and the distance warning, may be affected by the surrounding environment.
•The system is to be used only for non-commercial use, within the limits permitted by the relevant laws
•Avoid using the Car DVR in the vicinity of any devices that emit radio interference (eg. Microwave Ovens).
•It is considered normal operation for the Car DVR to get warm during use.
Battery Warning
•Always charge the Car DVR using the provided charger. Improper charging of the Car DVR may result in failure of the internal battery.
•Never dismantle the Car DVR or expose the internal battery.
•Do not dispose of the Car DVR in fire.
•Dispose of the Car DVR observing local regulations being mindful of the internal battery.
•Do not attempt to replace or expose the internal battery.
Notes on Installation
1. It is advised that the Car DVR is installed near the rear view mirror, at the top centre of the windshield for optimal operation.
2. Make sure that the lens is within the range of the windscreen wiper to ensure a clear view when it rains.
3. Do not touch the lens with your fingers. Finger prints left on the lens will result in unclear videos or photos. If photos or videos are blurred,
please clean the lens gently with a microfibre cloth.
4. Do not install the device on a tinted window. Doing so may damage the tint film and restrict the Car DVR’s GPS signal.
5. Make sure that the installation position does not hinder or block the field of view or GPS signal.
6. Only use the included charging cable to power the Car DVR.

6
1. Introduction
Thank you for purchasing a NanoCam Plus Car DVR. Please read through these instructions before attempting to install this product.
For the latest manual updates, please see www.nanocamplus.com.au or www.nanocamplus.co.nz.
1.1 Features
•Recording full high definition 1080P footage at 30 frames per second.
•2.7” colour screen
•165° wide angle lens
•GPS recording saves your speed and path
•Emergency recording saves your footage when an impact is detected
•Supports Micro SD cards, class 6 and above up to 32GB
1.2 Package Contents
Car DVR Mount with GPS Module Software CD Micro USB Cable 12v Adapter
1.3 Product Overview
1. USB socket
2. GPS socket
3. Power Button
4. Reset Button
5. Microphone
6. 2.7” Screen
7. Status light
8. 165° wide angle lens
9. Speaker
10. LED Light
11. OK Button
12. HDMI mini socket
13. Menu/Mode Button
14. Up Button
15. Micro SD card Slot
16. Down Button

7
2. Getting Started
2.1 Inserting Memory Card
With the Car DVR turned off and the screen facing towards you insert the memory card with the text on the Micro SD card facing toward
you. Push the memory card in until a click is heard.
Note:
1. Do not remove or insert the memory card while the Car DVR is turned on as this may
damage the memory card or corrupt the memory cards stored data.
2. Please use a Class 6 or higher rated micro SD card with a maximum capacity of 32GB.
3. Please format the Micro SD card before the initial use.
4. When removing the memory card, be careful as the card may eject quickly.
To remove the memory card
Ensure that the Car DVR is powered off, push the memory card until a click is heard and release the card to eject.
2.2 Installing the Car DVR
1. Remove the protective stickers from the Car DVR and the Suction Mount.
2. Slot the mount bracket into the socket on the top of the Car DVR and with the screen facing you, slide the bracket from left to
right until the bracket locks in place.
3. Connect the GPS plug to the Car DVR.
4. With the GPS module in the down position attach the suction cup to the windscreen.
5. Press the mount base firmly against the windscreen and switch the GPS module to the up position.
2.2.1 Adjust the device position
1. Loosen the knob on the right hand side of the mounting bracket, and adjust the vertical and horizontal angle of the camera.
2. Tighten the knob to lock the position of the camera.
2.2.2 Connecting to Power
Only use the included charger to power and charge the Car DVR.
1. Once the Car DVR is securely installed on your vehicle's windscreen, plug the 12v charger into your vehicle's cigarette lighter.
2. Run the cable along your vehicle's console and windscreen and plug the USB Micro plug into the Car DVR.
Note:
1. It is recommended that the Car DVR is installed behind your vehicle's rear view
mirror.
2. Make sure that the camera view is not obstructed by any window tint or any
other objects.
3. When removing the suction mount be sure to release the it by switching the
GPS module to the down position.

8
2.3 LED Indicator
STATUS EXPLANATION LED INDICATOR COLOUR
Battery Charging Solid RED Light
Power on, Battery Fully Charged Solid BLUE Light
Power on, Recording Flashing BLUE light
2.4 Powering the Car DVR On / Off
2.4.1 Auto Power On/Off
When the Car DVR is correctly installed and connected to your vehicle's 12v power supply, the Car DVR will automatically
power up and start recording when the vehicle accessories are activated.
2.4.2 Manual Power On/Off and Reset
2.4.2.1 Manual Power On
Hold the Power button on the top of the camera until the NanoCam Plus start up screen appears.
2.4.2.2 Power Off
Make sure that recording has been stopped and then press the Power button on the top of the car DVR. After
powering down the device please wait for 10 seconds before turning the Car DVR back on.
2.4.2.3 Reset the Device
If the Car DVR does not function normally, try restarting the car DVR. To restart the car DVR, with a flattened paper
clip press the small button in the middle of the underside of the Car DVR.
2.5 Playing back video on a PC
To playback video files on your PC it is recommended to connect the Micro SD card (not included) directly to your PC using either
a USB Micro SD card reader (not included) or if your PC has a SD card slot, a Micro SD/SD Card converter (not included).
Once the Micro SD card is connected it should appear as a removable storage device.
It is recommended that you transfer video files that you want to playback to a file on your computer before attempting to playback.
This will reduce any delay in playback.
To view the GPS data on these video files, the included GPS software will be required to show the speed and positioning of your
vehicle at the time of recording.
For more information on the GPS software, please see the section named Playback Software.
2.6 Initial Settings
Before using the Car DVR we recommend Formatting the Inserted Micro SD Card and setting the correct Time and Date.

9
2.6.1 Formatting the Inserted Micro SD Card
Formatting the Micro SD card will delete all information on the inserted Micro SD
Card and prepare the card for use with the Car DVR.
1. Press the OK Button to stop the Car DVR from recording.
2. Press the MButton to enter the Video Menu.
3. Press the MButton again to enter the Settings Menu.
4. Use the
<
and
>
Buttons to navigate the Settings Menu and highlight the
Format setting and press OK to select.
5. Select SD Card and press the OK Button.
6. Select OK to confirm and press the OK Button.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. Formatting your Micro SD Card will delete all files from the card. Once these files have
been deleted you will not be able to recover them.
2.6.2 Set Date / Time
Setting the Time and Date allows you to stamp your footage with the time as a
reference.
1. Press the OK Button to stop the Car DVR from recording.
2. Press the MButton to enter the Video Menu.
3. Press the MButton again to enter the Settings Menu.
4. Use the
<
and
>
Buttons to navigate the Settings Menu and highlight the
Date/Time setting and press OK to select.
5. Use the
<
and
>
buttons to edit the selected digit and the OK button to
confirm and progress to the next digit. The final field sets the format that the
date will be presented in, pressing OK with this field highlighted will save the
date and time and return you to the settings menu.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. Once the time and date is set it can be stamped onto your footage using the Date
Stamp setting. Please see section Date Stamp for more details.

10
2.7 Using the Car DVR
2.7.1 Recording Video
When the Car DVR is connected to your vehicle's 12v power supply, the Car DVR will automatically power up and begin
recording when you start your vehicle. During the start up the buttons will be unresponsive and the camera will take a
moment to begin recording. The Car DVR will automatically stop recording and shutdown when your vehicle is powered off.
Note:
1. Because of how some vehicles are wired, the recording may continue when the engine is switched off. If this happens, please
manually turn off the Car DVR or remove the car adapter from the cigarette lighter when not in use.
2. The recording loop length can be configured to save a video file for every 3 or 5 minutes of recording. For information on how to
adjust this setting please refer to the Loop Recording section of this manual.
3. The device saves the recorded footage and photos on to the inserted Micro SD Card. If the memory card capacity is full, the oldest
file in the memory card will be overwritten.
2.7.2 Locked Recording
Locked Recording saves the current video file and protects it from being overwritten. To manually start a Locked
Recording follow the instructions below.
1. During recording push the Mbutton.
2. To unlock the footage, press the Mbutton again.
3. To stop recording press the OK button again.
Note:
1. If the G Sensor (Gravity Sensing) function is enabled and a collision is detected, the device will automatically trigger the
emergency recording and protect the current video file. Please refer to the section titled G Sensor (Gravity Sensing).
2. The emergency recording file is created as a new file, which will be protected to avoid being overwritten by normal loop recording.
If the inserted Micro SD Card fills up with Emergency Recording files the message “SD Card Full” will appear on the screen, the
oldest emergency file will be automatically deleted when a new emergency recording file is created.
2.7.3 Recording Screen
Number Icon Item Description
1 Recording Indicator The Record Indicator will flash when the Car DVR
is Recording
2 Mode Mode shows whether you are in Video mode or
Photo mode
3 Loop Shows the duration of the loop clips
4 Motion Detection The Motion Detection Icon will appear when
Motion detection is activated

11
Number Icon Item Description
5 Exposure Shows the current exposure setting
6 Microphone Shows if the microphone is muted or recording
7 Wide Dynamic Range The WDR icon will appear when the Wide Dynamic Range setting is active
8 Day/Night Mode Will show a sun or moon icon indicating if the LCD light is activated or not
9 Gravity Sensing Icon shows the current Gravity Sensitivity
10 Recording duration Shows the current recording duration
11 Resolution Shows the current set resolution
12 GPS Signal The GPS icon appears when GPS is active
13 Memory card The Memory Card icon shows when a Micro SD Card is installed
14 Speed Shows your current speed
15 Date Shows the current date
16 Time Shows the current time
17 Battery Shows the battery level
18 Emergency Recording Shows when the Gravity Sensing function has been triggered
2.7.4 Video Mode
When the Car DVR is powered up the video screen will start by default. In this screen recording will automatically start and
can be stopped by pressing the OK Button. To access the Video Menu, ensure that the Car DVR is not recording then
press the Mbutton.
2.8 Video Menu
2.8.1 Resolution
Resolution sets the video quality. Higher resolution video will capture more detail and
will also produce larger files. To change the recording resolution, please follow the
instructions below.
1. Press the OK Button to stop the Car DVR from recording.
2. Press the MButton to enter the Video Menu.
3. Use the
<
and
>
Buttons to navigate the Video Menu and highlight the Resolution
setting and press OK to select.
4. Use the
<
and
>
Buttons to highlight your required resolution, then press the OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before
attempting to access the menu.
2. Higher resolution clips will create larger files which will fill the Micro SD Card faster.

2.8.2 Loop Recording
Loop recording allows you to set the duration that the camera will record before
creating a new clip. To set the clip length please follow the instructions below.
1. Press the OK Button to stop the Car DVR from recording.
2. Press the MButton to enter the Video Menu.
3. Use the
<
and
>
Buttons to navigate the Video Menu and highlight the Loop
Recording setting and press OK to select.
4. Use the
<
and
>
Buttons to highlight your required Clip Length, then press the
OK button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. Selecting the OFF option will create the longest possible clip, in most cases depending on
the set resolution and other factors this will be limited to 10MB.
3. To avoid filling the card quickly it is advised to use the 2 or 3 minute options.
2.8.3 WDR
The WDR setting increases the dynamic range of the camera. To turn this setting on
or off, please follow the instructions below.
1. Press the OK Button to stop the Car DVR from recording.
2. Press the MButton to enter the Video Menu.
3. Use the
<
and
>
Buttons to navigate the Video Menu and highlight the WDR
setting and press OK to select.
4. Use the
<
and
>
Buttons to highlight either OFF or ON, then press the OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
12

2.8.4 Exposure
Exposure is used to manually control the light sensitivity settings. To change the
Exposure setting follow the instructions below.
1. Press the OK Button to stop the Car DVR from recording.
2. Press the MButton to enter the Video Menu.
3. Use the
<
and
>
Buttons to navigate the Video Menu and highlight the
Exposure setting and press OK to select.
4. Use the
<
and
>
Buttons to highlight your required Exposure setting, then press
the OK button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2.8.5 Motion Detection
Motion Detection is used to pause recording when no motion is detected in front
of the camera, and to start recording when motion is detected again. To activate the
Motion Detection setting follow the instructions below.
1. Press the OK Button to stop the Car DVR from recording.
2. Press the MButton to enter the Video Menu.
3. Use the
<
and
>
Buttons to navigate the Video Menu and highlight the
Exposure setting and press OK to select.
4. Use the
<
and
>
Buttons to highlight either OFF or ON, then press the OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
13

14
2.8.6 Recording Audio
The Recording Audio setting allows you to mute the microphone during recording,
or set it to record. To set your recording preferences, please follow the instructions
below.
1. Press the OK Button to stop the Car DVR from recording.
2. Press the MButton to enter the Video Menu.
3. Use the
<
and
>
Buttons to navigate the Video Menu and highlight the
Recording Audio setting and press OK to select.
4. Use the
<
and
>
Buttons to highlight either OFF or ON, then press the OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2.8.7 Date Stamp
Date stamp will stamp the current date onto the footage for future reference. To set
the date stamp please follow the instructions below.
1. Press the OK Button to stop the Car DVR from recording.
2. Press the MButton to enter the Video Menu.
3. Use the
<
and
>
Buttons to navigate the Video Menu and highlight the Date
Stamp setting and press OK to select.
4. Use the
<
and
>
Buttons to highlight either OFF or ON, then press the OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. For date stamp to be correct the time and date must be set first. To set the time and date
please see section Date/Time.

15
2.8.8 G Sensor (Gravity Sensing)
The G Sensor defines the required force needed to trigger emergency recording.
Once Emergency recording is triggered the current recording will be saved and
protected from being saved over by the normal loop recording. To set the required
sensitivity please follow the instructions below.
1. Press the OK Button to stop the Car DVR from recording.
2. Press the MButton to enter the Video Menu.
3. Use the
<
and
>
Buttons to navigate the Video Menu and highlight the Gravity
Sensing setting and press OK to select.
4. Use the
<
and
>
Buttons to highlight either OFF or ON, then press the OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. If your memory card is filling up quickly you may need to lower the sensitivity of the G
Sensor (Gravity Sensor) to decrease the number of triggers caused by normal driving.
2.8.9 GPS
The Car DVR’s built in GPS sensor will record the speed and location of your vehicle
and encode the data into the recorded files. This can be activated or deactivated
using the GPS setting in the Car DVR’s video menu. To activate or deactivate this,
please follow the instructions below.
1. Press the OK Button to stop the Car DVR from recording.
2. Press the MButton to enter the Video Menu.
3. Use the
<
and
>
Buttons to navigate the Video Menu and highlight the GPS
setting and press OK to select.
4. Use the
<
and
>
Buttons to highlight your required setting, then press the OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. GPS tracking can only be played back using the included ‘Driving Recorder Player’
Software.

16
3. Photo Mode
This screen is used to capture still images using your Car DVR. To access the Photo
screen ensure that the camera is not recording and hold the M(Menu/Mode) button for
3 seconds. Photo mode also has a menu which is used to edit the photo settings. This
menu can be accessed by pressing the M(Menu/Mode) in the Photo Screen.
3.1 Photo Menu
3.1.1 Capture Mode
Capture mode is used to set a delayed timer. To set a timer delay follow the
instructions below.
1. Enter the Photo screen.
2. Press the MButton to enter the Photo Menu.
3. Use the
<
and
>
Buttons to navigate the Photo Menu and highlight the Capture
Mode setting and press OK to select.
4. Use the
<
and
>
Buttons to highlight your required timer delay, then press the
OK button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you
are in the Photo screen when you access the menu.
3.1.2 Resolution
Resolution sets the still image quality. Higher resolution images will capture more
detail and will also produce larger files. To change the photo resolution, please follow
the instructions below.
1. Enter the Photo screen.
2. Press the MButton to enter the Photo Menu.
3. Use the
<
and
>
Buttons to navigate the Photo Menu and highlight the
Resolution setting and press OK to select.
4. Use the
<
and
>
Buttons to highlight your required resolution, then press the OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you
are in the Photo screen when you access the menu.

17
3.1.3 Sequence
When Sequence is activated, when a photo is triggered a sequence of 3 photos is taken. To activate or deactivate
Sequence mode, follow the instructions below
1. Enter the Photo screen.
2. Press the MButton to enter the Photo Menu.
3. Use the
<
and
>
Buttons to navigate the Photo Menu and highlight the
Sequence setting and press OK to select.
4. Use the
<
and
>
Buttons to highlight either OFF or ON, then press the OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you
are in the Photo screen when you access the menu.
3.1.4 Quality
Quality sets the image detail. Higher quality images will capture more detail and
will also produce larger files. To change the recording resolution, please follow the
instructions below.
1. Enter the Photo screen.
2. Press the MButton to enter the Photo Menu.
3. Use the
<
and
>
Buttons to navigate the Photo Menu and highlight the Quality
setting and press OK to select.
4. Use the
<
and
>
Buttons to highlight your required quality, then press the OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you
are in the Photo screen when you access the menu.

18
3.1.5 Sharpness
Sharpness sets the boldness of the image. Images with a stronger sharpness will
create bolder images with stronger outlines. To change the photo Sharpness, please
follow the instructions below.
1. Enter the Photo screen.
2. Press the MButton to enter the Photo Menu.
3. Use the
<
and
>
Buttons to navigate the Photo Menu and highlight the
Sharpness setting and press OK to select.
4. Use the
<
and
>
Buttons to highlight your required sharpness, then press the
OK button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you
are in the Photo screen when you access the menu.
3.1.6 White Balance
The White Balance setting is used to manually adjust the settings used to
counteract different light conditions. This setting is set to Auto by default. To change
the White Balance setting follow the instructions below.
1. Enter the Photo screen.
2. Press the MButton to enter the Photo Menu.
3. Use the
<
and
>
Buttons to navigate the Photo Menu and highlight the White
Balance setting and press OK to select.
4. Use the
<
and
>
Buttons to highlight your required setting, then press the OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you
are in the Photo screen when you access the menu.

19
3.1.7 Colour
The Colour setting is used to set the colour palette. To change the Colour setting
follow the instructions below.
1. Enter the Photo screen.
2. Press the MButton to enter the Photo Menu.
3. Use the
<
and
>
Buttons to navigate the Photo Menu and highlight the Colour
setting and press OK to select.
4. Use the
<
and
>
Buttons to highlight your required colour setting, then press the
OK button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you
are in the Photo screen when you access the menu.
3.1.8 ISO
ISO is used to manage how much light is let into the image sensor. Setting a higher
ISO will let in more light and blurred movement and lower ISO will capture less
movement and less light. To change the ISO setting follow the instructions below.
1. Enter the Photo screen.
2. Press the MButton to enter the Photo Menu.
3. Use the
<
and
>
Buttons to navigate the Photo Menu and highlight the ISO
setting and press OK to select.
4. Use the
<
and
>
Buttons to highlight your required ISO setting, then press the
OK button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you
are in the Photo screen when you access the menu.

20
3.1.9 Exposure
Exposure is used to manually control the light settings. To change the Exposure
setting follow the instructions below
1. Enter the Photo screen.
2. Press the MButton to enter the Photo Menu.
3. Use the
<
and
>
Buttons to navigate the Photo Menu and highlight the ISO
setting and press OK to select.
4. Use the
<
and
>
Buttons to highlight your required exposure setting, then press
the OK button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you
are in the Photo screen when you access the menu.
3.1.2.0 Anti Shaking
The Anti Shaking setting uses the on board chipset to correct some of the blur
caused but handheld photography. To enable Anti Shaking follow the instructions
below.
1. Enter the Photo screen.
2. Press the MButton to enter the Photo Menu.
3. Use the
<
and
>
Buttons to navigate the Photo Menu and highlight the Anti
Shaking setting and press OK to select.
4. Use the
<
and
>
Buttons to highlight either OFF or ON, then press the OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you
are in the Photo screen when you access the menu.