nanoskin EVERGREEN EG-1006 User manual

Vacuum Gun
EG - 1006
Instruction Manual

EG1006001
EG1006002
EG1006003
EG1006004
EG1006005
EG1006006
EG1006007
EG1006008
EG1006009
EG1006010
EG1006011
EG1006012
EG1006013
EG1006014
EG1006015
EG1006016
Ref
No
.
.Part No. Description
Q ty
Tool
'
/
Ref
No
.
.Part No. Description
Q ty
Tool
'
/
1
2
3
4
1
1
1
1
1
1
1
1
1
1
1
Nozzle
Weighted Tube Ass y'
1
1
1
1
5
6
7
8
9
10
11
Gasket
PU Tube
Bracket
Switch
Nipple
12
13
14
15
16 Cone 2
A
Adapter 11
dapter 12
Clamp
Adapter 13
Adapter 14
Screw
1
Screw
Cone 1
EG-1006 Vacuum Gun

1
The Dust Collector Vacuum Gun is a blow & suction gun when connecting with wet/dry
vac and air compressor. A reversal “Tornado-like” air flow breaks down stubborn dirt,
then the vacuum sucks at the same time. The Dust Collector Vacuum Gun significantly
reduces air dust particle flows during operation and increases vacuum efficiency &
power up to 50%. The optimum air pressure operates between 85 and 95 psi.
Vacuum Gun
EG-1006
Instruction Manual
1
PARTS
Body :
Weighted Tube
Internal Cone
Trigger/Handle
Air Plug
Vacuum Hose Joint
Cone :
Standard Cone Cone with Brush
Adaptor Joints :
Adaptor Joint (L) Adaptor Joint (M) Adaptor Joint (S) Snap

DIRECTION FOR USE (PREPARATION)
2
Connection of Vac Hose
If the neck finish of vac hose and vacuum gun hose is different, please use the joint
adaptor to connect them together. (See figure below)
Situation 1: The connecting hose is too small
Situation 2: The connecting hose is too big
Joint Adaptor
Vacuum Hose
Joint Adaptor
Vacuum Hose

DIRECTION FOR USE (PREPARATION)
3
Connection of Air Compressed Air
Please turn off the air compressor while connecting the air compressor and air plug.
Connect the air plug with air coupler firmly.
Please connect the air plug and air coupler firmly.
Failure to connect properly might cause the air leaking when in operation
Please turn off the air compressor while disconnecting
the air plug.
Warning
Warning