General safety precautions General safety precautions
14. Do not install it at the unstable location such as on the bouncing prop or tilted place.
It may be tipped over as it loses balance or damaged as it is fallen down.
15. Do not install it at the place with poisonous gas.
It may cause the fire.
16. Do not install it at the location with continuous vibration.
It may be tipped over as it loses balance or damaged as it is fallen down.
17. Do not install it at the place on the strong magnetic field or current field.
It may cause fire, electric shoc or brea down.
This equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic envi-
ronment.
18. Fasten the wheel of the product or shelf with wheels when installing this product.
If it moves or is tipped over, it may be damaged.
19. Do not leave it in the car under the burning sun for a long time.
The high temperature may distort the cabinet or the parts inside may be bro en down or heated.
If you use this product in this condition, it may cause the fire, electric shoc or brea down due to the short circuit or
poor insulation.
20. Do not place any fire source such as candlelight close to this product or place it on this product.
If it is tipped over or fallen down, it may cause damage or fire.
21. Do not place heavy objects on this product.
It may be tipped over as it loses balance or damaged as it is fallen down.
22. Do not transport it with the power cord or the connection cable connected.
If you move this product with the power cord or the connection cable connected, the damaged power cord, connec-
tion cable or connection terminal may cause the fire, the electric shoc or brea down.
23. Pull the power cord out while holding the plug portion.
If you pull the power cord out by force, the cord may the fire or the electric shoc .
24. Do not climb on this product.
If you climb on it, it may damage or hurt it.
25. 2 persons or more shall transport the device, which is heavier than 18 g.
If you drop or tip over the device, it may damage it.
The weight is indicated on the user's manual.
26. Use the attached power cord and connection cable, or those, which are indicated on the user's manual.
If you do not use the designated power cord and connection cable, it may cause the electric shoc or brea down.
27. Turn off the power switch when connecting the power cord or connection cable.
If you not turn off when connecting it, it may cause the electric shoc or brea down.
28. Do not use any chemical such as the paint thinner or benzine to clean the cabinet.
It may scratch the surface or disappear the indication to cause wrong operation, whch can be the reason for disorder.
29.
Clean the cabinet with 5~6 time diluted neutral detergent water on smooth cloth as stirring to remove the contamination.
After that, clean it with dry cloth to remove any stain.
Than you for purchasing our product.
Before using it, please read this user's manual carefully and apply it correctly and safely.
Please eep this manual close to you so you can refer to it anytime after reading it.
Also, for the transportation of the product, please attach this manual without fail.
Please observe the notes below.
1. Use at the rated power voltage.
Use of non-rated voltage may cause fire, electric shoc and brea down.
2. Do not open the cabinet and external cover.
The high voltage inside of this product may cause the electric shoc .
3. Do not remodel or disassemble this product.
Remodeling or disassembling in wrong method may cause fire, electric shoc or brea down.
4. Do not insert or drop any foreign substance such as metals or flammable object inside from the air hole.
It may cause fire, electric shoc or brea down.
If any foreign substance is inserted inside of this product, turn off the power, pull the plug out of the soc et
and contact the sales department. Do not use the product with the foreign substance in.
5. Never touch the antenna lie or power plug if it stars to thunder.
It may cause the electric shoc .
6. If any impact is applied, the parts inside of the product may be fallen out or bro en to be the cause of fire, elec-
tric shoc or brea down.
7. Clean the dust on the power plug periodically.
The dusty power plug may cause the poor insulation due to the moisture to be the reason of fire.
8 . Do not destroy, process, ma e closer to heating device, bend or twist forcibly, place any heavy object on nor
bind the power cord or power plug. If it is used in the bro en condition, it may cause fire or electric shoc .
9. Do not touch the power plug with wet hands.
If you pull in or out the power plug with wet hands, it may cause electric shoc s.
10. Put the power plug in firmly.
Putting the plug incompletely may cause the electric shoc or fire by the generation of heat.
11. Do not use any non-rated power soc et with numerous devices jointed on one power soc et or cable device.
The wire of non-designated capacity may cause the fire due to the generation of heat.
12. In case of malfunction, turn off the power switch immediately and pull out the power plug.
If this product is used in the abnormal condition such as damage to it, foreign substance inside of the prod-
uct, generation of joints, smelling, smo ing, overheating and non production of signal, it may cause fire, elec-
tric shoc or brea down.
Turn off the power switch immediately, pull the power plug out of the soc et and contact to the sales store..
13 . Leave space 10 cm or more from the wall for the installation of the device.
Do not install it close to the wall nor bloc the ventilation of the air.
Insufficient ventilation or accumulated heat inside of the product may cause the fire.
