pg. 3
Copyright 2018© Nanovdisplay, Inc. All rights reserved. www.nanovdisplay.com
1.0 Warranty Information
Regarding Operating Conditions
This product should only be installed in an environment that satisfies both the temperature
and humidity levels required for normal operating conditions.
Temperature: -30°𝐶 to +50°𝐶
Humidity: 20% to 80%
Warranty Statement
Subject to the requirements, conditions, exclusions and limitations of the original Limited
Warranty supplied with Nanov Display Inc. products, and the requirements, conditions,
exclusions and limitations contained herein, Nanov will additionally provide Warranty
Repair Service in the world for the warranty period originally specified, and to the
Original Purchaser only. The above described warranty repairs must be performed by an
Nanov Authorized Service Center or Distributor. Along with this Statement, the Original
Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be
presented to the Service Center or Distributor. Conditions covered are limited only to
manufacturing defects in material or workmanship, and only those encountered in normal
use of the product.
Warranty –36 Months
Notice for Users
This manual describes how to use the product. Please read the manual carefully before
using the product. After reading the manual, keep it with the certificate so you may
reference the manual at any time. If you have any question or a problem occurs, please
contact to the provider or the service center immediately.
