NASA electric NS-60 User manual
1
NS-60
2
3
min“
1
2
3
4
85
6
7
8
9
10
11
4
12
8
13
14
15
16
17
5
LA
MB
NC
ASMD
PE
QF
RG
SH
TI
UJ
K
O
NS-
6
1
2
3
1
2
3
4
1
Min2
3
7
1
MAX...Min2
3
4
MAX...
Min
V
HZ
W
8
1
2
3
MAX4
5
6
1self clean7
8
9
9
10
1
2
3
24
85
6
7
8
9
10
11
11
812
13
14
15
16
17
12
NA
OB
PC
.Q D
RE
SF
TG
UH
I
J
K
L
M
1
2
3
1
2
3
NS-
13
4
1
2
3
1
2
MAX...
VV HZ Hz
W Watt
3
4
14
MAX...
1
2
3
MAX4
5
6
7
8
9
15
16
Anti-drip:
This iron is equipped with a drip stop function: the iron automat-
ically stops steaming when the temperature is too low to prevent
water from dripping out of the soleplate.
Anti-calc:
The Anti-calc function ltrate the minerals from the water to pre-
vent mineral residue build up at the steam chamber.
17
4.After the indicator goes out, turn the steam control to the suit-
able position (g10), steam will be sprayed, ironing can start.
Bursting steam:
Set the temperature control at the “…” or MAX position, then
press down the bursting steam button (g11), the base plate will
spray out bursting steam.
Dry ironing:
Turn the steam control to minimum position (g6), set the tem-
perature control to the suitable position, you can dry ironing.
Self cleaning:
1.Set the 3-position switch to position (for corded iron)
2.Take the iron from the stand.
3.Ensure that there is enough water in the water tank.
4.Set the temperature konb to MAX
5.Insert the mains plug into the wall socket
6.When the pilot light rst goes out and then comes on again,
remove the mains plug from the wall socket
7.Press the “self clean” button for about 1 minute,
8.Strong steam and hot water will be sprayed to clean the steam
chamber.
9. Let the iron heat up again, the remainder of the water in-
side the steam chamber will now vaporized and leave the iron
through the soleplate.
18
4. when cordless steam ironing for a considerable time and
when applying a number of “shot of steam”, the soleplate might
cool down more than required. For that reason we advise you
to always use the iron in the corded mode if you wish to apply
numerous shots of steam
Filling water:
1.Before lling water, please pull out the plug rst.
2.Set the steam control to the minimum position.(=no steam)
(g6)
3.Set the 3-position switch to position (g2) and take
cordless iron from the stand .Pull down the cover of water lling
mouth, then ll water (g7).
Spraying:
Press the spraying button (g8), steam will be sprayed out from
the spraying nozzle. At that time, you should keep enough water
in the water tank.
Steam ironing:
1. Ensure that there is enough water in the water tank.
2. Turn the steam control to minimum position (g6) and set the
temperature control at the “…” or MAX position (g9).
The list of the marking symbol
V Volt Hz Hertz
3. Insert the mains plug into the wall socke t
19
A: Soleplate L: Pilot light
B: Skirt M: Rear cover
C: Handle N: Cord guard
D: Spray ASM O: Power unit
E: Fill cover P: Face plate
F: Clean button Q: 3-positions switch
G: Steam knob R: Stand
H: Spray & Burst steam button S: Stand cover
I: Temperature dial T: Stand skirt
J: Top handle U: Skirt cover
K: Water tank
Main technical parameters:
Corded ironing :
1. Set the 3-position switch to position (g3)
2. Take the iron (with power unit) from the stand (g4)
3. Always replace the iron (with power unit) on the stand when
you interrupt ironing.
Cordless ironing :
1. Set the 3-position switch to position (g2)
2. Take the iron (without power unit) from the stand (g5)
3. Always replace the iron on the stand when you interrupt iron-
ing
20
CORDLESS/CORDED STEAM IRON
NS-60
Please read these instructions for use and have a good look at
the illustration before using the appliance
Characteristics and structure:
The product has many functions such as temperature regulating, spray-
ing, dry ironing, variable steam, bursting steam, etc. The iron can be used
for corded and cordless iron. And it with characteristics: luxury shape,
high heat eciency, easy using, good ironing result, work saving and time
saving, and so on.
AJ-2059B
Table of contents
Languages:
