NAUTIZ X2-V User manual

NAUTIZ
User Manual
Ver：V1.0

Contents
1 Introduction....................................................................................................................................1
1.1 Appearance of NAUTIZ X2-V................................................................................................................... 1
1.2 Installing the Battery.................................................................................................................................. 2
1.3 Removing the Battery................................................................................................................................ 2
1.4 Inserting a TF Card.................................................................................................................................... 2
1.5 Charging...................................................................................................................................................... 3
2 Use NAUTIZ X2-V..................................................................................
2.1 Powering On/Off the NAUTIZ X2-V......................................................................................................... 5
2.2 Locking and Unlocking the NAUTIZ X2-V.............................................................................................. 5
2.3 Keys............................................................................................................................................................. 5
2.4 Home Screen ...............................................................................................................................................6
2.5 Status Icons and Indicators....................................................................................................................... 6
2.6 Basic Settings............................................................................................................................................. 7
4 Network Connection and Connection Synchronization .....................................................12
4.2 Wi-Fi Network Connection...................................................................................................................... 12
4.3 Bluetooth....................................................................................................................................................12
4.4 GPS............................................................................................................................................................14
4.5 Connecting the NAUTIZ X2-V to a PC..................................................................................................14
4.6 Synchronization.....................................................................................................
5 Enabling the NFC Function .......................................................................................................16
5.1 To enable the NFC function, do as follows........................................................................................... 16
6 Managing the NAUTIZ X2-V......................................................................................................17
6.1 Installing Applications...............................................................................................................................17
6.2 Uninstalling Applications..........................................................................................................................17
6.3 Managing Applications ..............................................................................................................................17
7 Precautions and Troubleshooting ........................................................................................... 18
7.1 Precautions............................................................................................................................................... 18
7.2 Troubleshooting........................................................................................................................................ 19

NAUTIZ X2-V User Manual
- 1 -
1 Introduction
1.1 Appearance of NAUTIZ X2-V
Figure 1-1 Front view of NAUTIZ X2-V
Figure 1-2 Rear view of NAUTIZ X2-V

NAUTIZ X2-V User Manual
- 2 -
1.2 Installing the Battery
1. Push the battery to the bottom of the battery compartment and press it downwards.
2. Push the battery cover lock to the right to lock the battery cover.
1.3 Removing the Battery
1. Push the battery cover lock to the left.
2. Pull up the battery cover from the groove at the upper end of the battery cover.
(Note: The NAUTIZ X2-V adapts integrated design for the battery and battery cover.)
1.4 Inserting a TF Card
1. Push the card cover by following the OPEN direction marked on the card cover.
2. Open the card cover upwards and insert a TF card, as shown in the figure below.

NAUTIZ X2-V User Manual
- 3 -
3. Close the card cover, as shown in the figure below.
4. Pull back the card cover by following the LOCK direction marked on the card cover.
(Note: TF cads, namely Micro SD cards, are applicable to the NAUTIZ X2-V. After replacing a TF
card, restart the NAUTIZ X2-V.)
1.6 Charging
You can charge a battery in the following ways:
1. Bottom charging cable;
2. 1-slot charging & communication stand (to be purchased separately).
3. Battery quadruple charger(to be purchased separately)
4. Quadruple charger (to be purchased separately)
Bottom charging cable 1-slot charging & communication stand Battery quadruple charger Quadruple charger

NAUTIZ X2-V User Manual
- 4 -
Description of charging indicator:
When the battery is in the charging status, the charging indicator is in red.
When the battery is fully charged, the charging indicator is in green.
When the battery volume is low,
(1) a message indicating that the battery volume is less than 20% is displayed on the
screen.
(2) the NAUTIZ X2-V gives out a low battery prompt tone.
(3) the charging indicator blinks in red.

NAUTIZ X2-V User Manual
- 5 -
2 Using the NAUTIZ X2-V
2.1 Powering On/Off the NAUTIZ X2-V
After installing a SIM card and a battery and charging the NAUTIZ X2-V completely, you
can use the NAUTIZ X2-V.
1. To power on the NAUTIZ X2-V, press the On/Off key on the right for some time. The
NAUTIZ X2-V vibrates, displays the startup screen and enters the Android OS after the
guide progress is complete. It takes some time for the NAUTIZ X2-V to initialize. Please
wait patiently.
2. To power off the NAUTIZ X2-V, press the On/Off key on the right for some time. A
dialog box that provides shutdown options is displayed. Click Power Off.
2.2 Locking and Unlocking the NAUTIZ X2-V
Locking the NAUTIZ X2-V
Press the On/Off key momentarily to lock the NAUTIZ X2-V. If you do not perform any
operation for the NAUTIZ X2-V within the default locking time, the NAUTIZ X2-V is
automatically locked.
Unlocking the NAUTIZ X2-V
Press the On/Off key momentarily and swipe up on the
unlock button in the home screen to unlock.
2.3 Keys
The NAUTIZ X2-V provides a physical keypad that consists of four keys, as shown in the
figure below.
On the physical keypad of the NAUTIZ X2-V, keys are respectively home key, menu key,
scan key, and back key from left to right.
Home key: used to go back to the home screen.
Menu key: used to show menus.
Return key: used to return to the previous operation screen.

NAUTIZ X2-V User Manual
- 6 -
2.4 Home Screen
Return key
void key
Menu key
Home key
By default, the NAUTIZ X2-V has one home screen. You can add home screens by placing
applications to the home screen and slide to the left or right to switch to another home
screen. On the home screen, click the icon of any application to open the application.
★Tips
You can freely add or delete the icon of an application in the blank of the home screen.
Swipe up on the home screen to view all programs.
2.5 Status Icons and Indicators
Status icons and indicators are in the status bar at the upper part of the screen and show
device status and notifications.

NAUTIZ X2-V User Manual
Table 2-1 Status icons
Icon
Description
Icon
Description
WLAN
USB debugging
Bluetooth
Charging
USB connection
Battery full
Missed calls
Multiple notification icons,
which are beyond the scope
of display
Modem logs
Application permission
Silent mode
Connection between USB
and PC pea pod
★Note
As software is upgraded continuously, status indicators may be different from those
displayed on the NAUTIZ X2-V. The actual status indicators prevail.
2.6 Basic Settings
2.6.1 Date and Time Settings
To change the date and time in the NAUTIZ X2-V, do as follows:
1. Find the following icon.
3. Select Settings > System >Date & time >Set date or Set time.
- 7 -

NAUTIZ X2-V User Manual
- 8 -
2.6.2 Display Setting
Find the following icon.
Select Settings >Display > Brightness / Night mode / Automatic brightness adjustment /
Wallpaper / Hibernate / Auto-rotation screen / Font size / Display size / Screensaver /
Device theme
2.6.3 Ringtone Setting
Find the following icon.
Select Settings > Sound. Volume and ringtone can be set.