Nav TV StreamBlue NTV-KIT510 User manual

StreamBlue
Steering Wheel to Smart-Device Controller
BM, DS
8/20/14
NTV-DOC190
StreamBlue
Steering Wheel to Smart-Device Controller with Audio Streaming
NTV-KIT510
Compatible with most Bluetooth enabled tablets and smart phones
3950 NW 120th Ave, Coral Springs, FL 33065 TEL: [phone] FAX: [phone]

BHM
10/09/14
NTV-DOC190
rB7
Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
2 | P a g e
PAC® SWI-RC/X
Metra™ASWC-1
iDataLink© Maestro
Overview
StreamBlue is a super high-quality Bluetooth 4.0 audio streaming interface that provides a seamless and
secure bi-directional wireless connection between your tablet or smart phone. The included and
selectable analog RCA or digital S/PDIF (electrical coaxial) allow the StreamBlue to be used by itself,
directly connected to a factory or aftermarket audio input or aftermarket amplifier, or to a third party
audio processing unit with either analog RCA or digital S/PDIF input. StreamBlue supports pairing of up
to 8 different devices and provides a 1 AMP output to turn on external devices whenever a paired device
is active. Additionally, when used in an application where a tablet or smart phone is used to replace the
factory radio, the StreamBlue, coupled with a vehicle compatible steering wheel control interface from
PAC©, Metra© or iDatalink©, allows steering wheel control functionality for safety. Please check with
the manufacturers of these steering wheel control devices to ensure compatibility and functionality with
your vehicle prior to installation (factory radio cannot coexist with the StreamBlue for steering wheel
control functionality).
Compatible with the following SWC interfaces:
Module Pin Outs
Kit Contents
Required Parts
Pin #
Color*
Description
1
Yellow
(+) 12v Constant input
2
Red
(+) 12v Accessory input
4
Red
IR (data) input
5
Brown
Not Used - Insulate end
6
White/Red
Not Used - Insulate end
7
Pink
Not Used - Insulate end
8
Blue
12V output (see note at right)
9
-Clear/Red band-
Right (+) RCA output
10
Black
(-) Ground input
12
[Shield]
IR Ground input
13
White
IR 3.3v input
14
Brown/Red
Not Used - Insulate end
15
Black
S/PDIF Shield output
16
Red
S/PDIF (+) Signal output
17
Black
RCA Shield output
18
-Clear-
Left (+) RCA output
StreamBlue module
NTV-ASY201
Power/Audio harness
NTV-HAR249
-Output 1: Provides 12v+ output when
Bluetooth is in use. Insulate wire if not
using.
All wires not mentioned here are not
used for this install.
Steering Wheel Control interface
(only one required, not included)
USB Cable
NTV-CAB009
Wire Side

BHM
10/09/14
NTV-DOC190
rB7
Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
3 | P a g e
1. Begin by installing the steering wheel control (SWC) device of your choice into the vehicle. Refer
to the installation instructions that came with the module of your choice and note any
limitations listed in the manufacturer's manual. E.G. "Will not operate Bluetooth buttons, etc." If
any button is not configurable it will not function with the StreamBlue. The StreamBlue remote
functions will not operate without one of the following 3 steering wheel control interfaces:
a. PAC® SWI-RC/X
b. Metra™ASWC-1
c. iDataLink© Maestro
2. Once the SWC of your choice is installed, follow the manufacturer's manual to program the unit
for:
a. Metra© ASWC-1: manually configure the device for CLARION 1
b. PAC® SWI-RC/X : configure for CLARION
c. iDataLink© Maestro : configure for Clarion with Bluetooth.
3. BUTTONS TO PROGRAM: Follow the manufacturer's directions to program the following
buttons once the unit is installed and the proper Clarion radio is selected: Volume up, Volume
down, Track up, Track down, Source and Mute.
StreamBlue Installation
1. From the StreamBlue module harness (diagram on next page), connect the following:
a. Pin 10 (black) to chassis ground
b. Pin 1 (yellow) to a constant 12v source
c. Pin 2 (red) to a 12v accessory source
2. Plug the male 3.5mm jack from the steering wheel control interface (If steering
wheel controls are needed. If not, skip this step –See FIG 2 wiring diagram)
into the female 3.5mm jack on the StreamBlue harness.
3. Connect the audio output of your choice (RCA low level or S/PDIF) to the
amplifier/auxiliary input in the vehicle. This may require a pair of RCAs, RCA to 3.5mm
adapter or S/PDIF to TOSLINK adapter (not included).
Steering Wheel Control Module Installation, Radio Type and Button Configuration
SWC button
StreamBlue button equivalent
*VOLUME +
VOLUME +
*VOLUME -
VOLUME -
TRACK +
TRACK +
TRACK -
TRACK -
**SOURCE/MODE
PAUSE/PLAY
MUTE
MUTE
**Holding the SOURCE/MODE button (3
sec) disconnects the last paired device
from the StreamBlue. A short tone will be
heard upon disconnect.
Functions may vary between
devices and OS’
*Volume control is not supported when S/PDIF is used.

BHM
10/09/14
NTV-DOC190
rB7
Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
4 | P a g e
4. Unplug power to the SteerBlue module. On the side of the StreamBlue module, select the audio
output type being used* After the audio output format has been selected via the dip switch plug
power back into the SteerBlue module:
Dip Switch
1
2
X
X
Dip Switch
1
2
X
X
5. Once all the above steps are completed, test for proper functionality by enabling the Bluetooth
function on your smart-device. With the car on, do a scan for devices and ‘StreamBlue’ should
display. Select ‘StreamBlue’ and allow your Tablet or Smartphone to connect to it. Paired
devices will be remembered. There is no programming necessary for the StreamBlue.
6. Once installation is complete, it’s a good idea to cycle the ignition a few times to emulate exiting
and re-entering the vehicle and check for auto-reconnect functionality. Give the StreamBlue up
to one minute to reconnect with a smart device after cycling the ignition.
7. Optional: Output 1 (Blue) provides 12v+ output when Bluetooth is active (linked with a smart-
device). This wire is limited to a 1 Amp output and is perfect for use as an amplifier turn on. If
not using this wire, insulate for protection.
8. The Brown, Brown/Red and White/Red wires on the StreamBlue harness are not used
presently and are for future use. Please insulate the end of these wires.
RCAs
S/PDIF
*Only one type of audio output
can be used at a time: analog
or digital.
* Audio output selection is made when the module is unplugged. Volume control is not supported when S/PDIF is used.

BHM
10/09/14
NTV-DOC190
rB7
Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
5 | P a g e
Note: This diagram is for semi-
auto audio switching. For
manual switching, add a toggle
between Output 1 and AUX
trigger (blue wires). NAV-TV
recommends an S2P for ease of
install (gaining 12v ACC)
Wiring Diagram Scenarios
For adding Bluetooth streaming with a NAV-TV MOST-AUX (no steering controls)
FIG 2
FIG 1
For adding Bluetooth and steering wheel controls (radio replaced with tablet/
controlling smartphone only)

BHM
10/09/14
NTV-DOC190
rB7
Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
6 | P a g e
StreamBlue Button Functions
Controlling your smart device with the StreamBlue works just as you would expect: volume
buttons control the volume and track buttons control the track selection. By default, the "source"
button will play and pause the music. Pressing ‘play’ after linking Bluetooth will play the default
music player on your device (may require a second press on some tablets and smart phones
depending on the model, carrier, operating system and firmware version). If you have an app open
and running, it will take precedence over the default music player when pressing pause/play.
Pressing and HOLDING (3 seconds) the SOURCE/MODE button will disconnect the last paired
device. This should be used in the event that you are having trouble connecting via Bluetooth, if
you wanted to use the mobile device’s native keyboard, or if a passenger wanted to stream their
music instead of the typically connected device.
Output 1 will provide a 1 Amp, 12v+ output when the smart-device is linked via Bluetooth to the
StreamBlue. This can be used as a remote turn on for an amplifier or other use.
The following diagram is laid out as an example of what could be programmed. When you program the SWC
interface to learn the vehicle’s steering wheel buttons, you can set any button to do whichever function you
choose (to some extent), therefore button operation will be very install-dependent.
Track down
Track up
Volume down
Pause/Play
(programmed as
MODE/SOURCE)
(
Volume up
The StreamBlue does not support Voice Command launch from a steering wheel button press. However, with the
latest operating system updates on the majority of commonly used tablets and smart phones, Voice Recognition
can be launched using only a verbal command. Depending on your device's setting, the tablet or smart phone
may have to be unlocked and/or the streaming paused prior to a verbal voice recognition command being
recognized. This is especially helpful for applications where a steering wheel control interface is either not used
or supported and hands free operation is required by law. Please consult your carrier or device manual for
individual settings and verbal voice recognition help.

BHM
10/09/14
NTV-DOC190
rB7
Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
7 | P a g e
StreamBlue Operation
The StreamBlue will remember up to 8 different devices. After 8 devices have been connected, it
will delete the oldest device on the list automatically.
Using the StreamBlue in conjunction with a factory radio is not supported at this time. This is a
limitation caused by the third party steering wheel control interface due to the fact that they
were engineered to be used ONLY when replacing the factory radio, not in combination with
the factory radio.
General functionality of the StreamBlue will vary due to differences in hardware platforms and
operating systems. NAV-TV cannot support every claimed feature for every device.
VOICE COMMAND usage on Android will play audio over BT, alternate devices will not (audio
will be heard from the device, not over BT)
Once accessory is present on the red accessory wire of the StreamBlue it will automatically look
for the last device that was active. E.G. if an in dash tablet was last used with the device and
functioning when the vehicle was turned off, the StreamBlue will first attempt to connect to this
device when the ignition is turned on again.
While in use, the StreamBlue will stay connected to the paired device in use unless:
oACC power (red wire) is removed,
oBluetooth is turned off on the connected device,
oThe StreamBlue device is deleted from the connected device, or
oThe connected user’s device falls out of range (~15-20’) to the StreamBlue*
Volume control (from steering wheel) controls the StreamBlue exclusively (no indication on
Android, other devices will show volume bar), so it’s best to set the smart device’s volume to
desired standard volume level. NOTE: Volume control is not supported for S/PDIF out
applications. If Volume is adjusted from the smart device, it will control the volume of the
StreamBlue when connected and paired.
The StreamBlue will wake up the smart device if in sleep mode automatically upon Bluetooth
connection. (It will not unlock the device if locked)
To begin music playback on smart devices after Bluetooth connection, simply press the button
assigned to the SOURCE/MODE command once. This button may have to be pressed twice for
this command.
Pressing and HOLDING (3 seconds) the SOURCE/MODE button will disconnect (Bluetooth) the
last paired device. This command only disconnects, it will not connect a device.
On Android devices it may be necessary to open the music player or APP upon wakeup before
the device can be controlled by the StreamBlue (device dependent, many Androids will begin
playing the default music player). This varies with many devices and your individual device must
be tested after installation to see if "AUTOPLAY" is supported with your Android device.
*Note: if the connected device falls out of range and returns (assuming the StreamBlue is still on and
running), the StreamBlue may have to be manually reconnected on some devices.

BHM
10/09/14
NTV-DOC190
rB7
Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
8 | P a g e
The behavior of all button assignments are limited by the SWC interface’s ability to read the
vehicle steering wheel button presses and deliver them to the paired Smartphone or Tablet.
Since the StreamBlue emulates the exact functions of the buttons on the device, the operation
will be dependent on the stock functionality of each paired device.
FAQ & Troubleshooting
Q1: I installed the StreamBlue, paired my device successfully but the steering wheel controls do
nothing.
A1: The StreamBlue has an LED on the circuit board that blinks slowly when a device is paired to it and
active. When no device is connected to the StreamBlue or active, the LED blinks VERY slowly. When the
unit receives IR commands from the steering wheel control interface it blinks rapidly. When pressing the
steering wheel buttons are you seeing the LED blink rapidly? If yes check to make sure that you have
programmed the steering wheel control interface correctly according to the manufacturer's directions,
the proper Clarion radio type on page 3 of these directions, and that you have assigned the steering
wheel buttons according to the recommendations on pages 3 & 4. If no, the StreamBlue is not receiving
any IR commands from the steering wheel interface. Did you plug the male 3.5 mm connector from the
steering wheel control interface into the female 3.5 mm female connector of the StreamBlue? Inspect
your wiring, connections and contact the manufacturer of the steering wheel control interface if
problems persist.
A2: Check to make sure that the StreamBlue device shows "connected" in your devices' Bluetooth
manager. If it does not show connected, delete the device and repair it. The StreamBlue will not
function on any paired device until the paired device shows that it is connected.
Q2: I programmed everything correctly but not all buttons are working.
A1: Make sure that the functions assigned to each button are correct and reprogram the steering wheel
control adapter for the correct functions.
A2: In some cases not all steering wheel control buttons function with certain steering wheel control
adapters. Check the compatibility of your make, model, year and trim level with the installation and
operation manual of the steering wheel control interface. If problems persist contact the manufacturer
of the steering wheel control interface.
Q3: What happens if I pair more than 8 devices to the StreamBlue?
A: If more than 8 devices are paired to the StreamBlue the oldest device in the pairing history will be
deleted and the new device will be allowed to pair. Additionally, holding the button programmed for
SOURCE/MODE will disconnect the last paired device.
Q4: How long does the StreamBlue device take to pair?

BHM
10/09/14
NTV-DOC190
rB7
Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
9 | P a g e
A: The initial pairing of a new device may take up to 30 seconds to pair for the first time. After the unit is
paired, the connection usually takes between 3 to 5 seconds after start up as long as the device you are
trying to connect was the last device connected to the StreamBlue.
Q5: I just purchased a new device. How do I know if it is compatible with the StreamBlue?
A: If the new device is Bluetooth capable, chances are that the StreamBlue will be compatible. However,
we cannot guarantee that all functions will be available. The StreamBlue is USB updateable and, as
newer devices become available and tested, updates will be released to ensure device dependent
compatibility. NOTE: Due to limitations with some devices we cannot guarantee full support due to
device limitations.
Q6: Volume control isn’t working when I use S/PDIF for audio out.
A: Volume control for S/PDIF audio out is not supported. You must use the volume knob (DRC) of the
audio processor.
Q7: I cannot pair to a secondary device as the StreamBlue thinks it is still connected with (or will not
disconnect from) the original device.
A: Long press the button programmed for ‘PAUSE/PLAY’ (source/mode) to release the last connected
device from the StreamBlue.
If after reading through this installation and user manual problems still persist, please call our technical support department
at 1-866-477-3336 x 2 (toll free USA and Canada) or 1-561-955-9770 x 2 (internationally).
Please note that we cannot provide support for steering wheel control interface programming
and installation support. Please contact the manufacturer of the steering wheel control
interface for support.

BHM
10/09/14
NTV-DOC190
rB7
Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
10 | P a g e
Tested Devices
The StreamBlue is compatible with most current tablets and smartphones equipped with current
operating systems as of 10/7/14.
Other tested devices:
Samsung Galaxy S5, S4, S3
Samsung Galaxy Tab 2 & 3
Toshiba Thrive
HP Windows 8.1 Tablet (track, volume only)
All have full transport control over the current open APP, i.e, video player, Netflix, Pandora, etc.
Current tests with HTC phones on the AT&T network have shown that they will not connect and therefore
are not supported.
More devices will be added as they’re tested.