NavAtlas DXP1000DVR Operating instructions

INSTALLATION/OWNER’S MANUAL
Receiver with Bluetooth®
featuring a 6.2" Touch Screen Display
DXP1000DVR

Copyright Notes
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Other trademarks and trade names are
those of their respective owners.

2
DXP1000DVR
3
4
5
6
7-8
9
10-12
13-14
15-16
17-18
19-20
21-22
23
24
25
Page
Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparation/Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio Wiring Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AM/FM Tuner Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USB Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DVR Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DualMirror Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bluetooth Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Auxiliary Inputs/Rear Camera Operation. . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents

3
DXP1000DVR
Upon installation of this Monitor (“unit”) into a vehicle, the driver of the vehicle must not
operate this unit by watching videos or playing video games while driving. Failure
to follow this instruction could lead to driver distraction which could result in serious
injury or death to the vehicle’s occupants or persons outside the vehicle and/or property
damage.
Several states prohibit the installation of monitors if the screen is visible from the driver’s
seat. If you reside in a jurisdiction which has enacted such a law, this unit must not be
installed so that the screen is visible from the driver’s seat. When installing this unit
in the front console/dashboard, the unit must be positioned so that it is facing the front
passenger seat only. Failure to follow this instruction could lead to driver distraction
which could result in serious injury or death to the vehicle’s occupants or persons outside
the vehicle and/or property damage.
When operating this unit, keep the unit’s volume level low enough so that the vehicle’s
occupants can hear traffic-related sounds such as police and emergency vehicles.
Failure to follow this instruction could lead to driver distraction which could result in
serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or
property damage.
WARNING

4
DXP1000DVR
Safety Information
Please read all instructions carefully before attempting to install or operate.
Due to its technical nature, it is highly recommended that your DXP1000DVR is installed by a professional installer
or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only.
To prevent damage or injury:
• Make sure to ground the unit securely to the vehicle chassis ground.
• Do not subject the unit to excessive shock.
• When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may
cause the unit to malfunction.
• To prevent short circuits when replacing a fuse, disconnect the wiring harness first.
• Use only the provided hardware and wire harness.
• To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or volatile solvents
such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing.
• When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than
usual. Normal brightness will return after using the monitor for a while.
• When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or other cables
with an area of 0.75mm (AWG 18) or more to prevent voltage drops.
• Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous
to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap
immediately.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

5
DXP1000DVR
Preparation
Before You Start
• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it
would be subject to dust, dirt or excessive vibration.
Pocket Removal
• Unlock hood tabs and remove hood panel.
• Unscrew torx to remove dash panel.
• Pull dash panel to unclip from dash.
• Unscrew torx screw and pull out pocket.
Note: Remove screw anchor
from factory pocket and attach
to DXP1000DVR for mounting.
(Factory bracket
not included with
DXP1000DVR unit)
A
fter installation, use
screws to support unit.
1. Unlock hood tabs and remove
hood panel
.
2. Unscrew torx to
remove dash panel.
3. Pull dash panel to unclip from
dash.
4. Unscrew torx screw, and pull
out pocket.

6
DXP1000DVR
Wiring Diagram - Inputs/Outputs
Note: Please connect cameras before
powering the unit. Damage or no
video signal may occur if connected
after unit is on.
(Optional RBX4)
12V @ 1A AUX Switches
(External lighting, etc.)
Universal antenna required
(sold separately)
Universal antenna
required
(sold separately)
Note: Amplier (RCA) cables not
included (must purchase separately)
ANBX1/DMH25)
ACC
(

7
DXP1000DVR
Audio Wiring Configuration

8
DXP1000DVR
Audio Wiring Configuration

9
DXP1000DVR
Control Locations
Power / Mode
Home
Volume Down
Volume Up
1
2
3
Go Back (for DualMirror control via Android only)
Home (for DualMirror control via Android only)
Menu (for DualMirror control via Android only)
microSD slot (for DVR only)
5
6
7
4
234 5 7
6
18
8

10
DXP1000DVR
Power On/Off
Mode
Volume
Auxiliary Input
USB Port
microSD
Main Menu
Momentarily press to turn the unit on. Press and hold to turn the
unit off.
Press to step through all available input modes: Radio, DVR, USB,
DualMirror, Bluetooth Phone, Bluetooth Music, DualMirror,Music,
Video, Picture, Switch, QR Code, AV In and Settings. Modes of operation
are indicated on the display and/or the monitor.
Press +or -to increase or decrease the volume level.
Connect external audio devices to the rear 3.5mm auxiliary input.
Connect a USB device to the rear USB port to play MP3 files or view
AVI, MP4 video files or JPG photos.
The microSD card is for DVR recording only and is compatible up to
128GB.
From any operational mode, press the house icon in the lower left
corner to access the Main Menu screen. Swipe the screen or use the
right and left arrow keys to step through the three screens of menu
options.
General Operation

11
DXP1000DVR
From the Main Menu screen, press SETTINGS to access the Settings menu
and select from six categories across the bottom: General, Clock, Audio, Video,
Bluetooth and Language.
General:
• Key Beep - Select On or Off.
• Radio - Adjust the following radio options:
- Select between STEREO or MONO operation.
- Select between LOCAL or DX (distance) tuning.
- Select between the following region settings: USA, SOUTH AMERICA
and EUROPE.
- Select between RDS Regional ON or OFF.
- Select an RDS TA Volume between 0and 47.
- Select between RDS TA OFF or ON.
- Select between RDS AF OFF or ON.
• Camera Icon - Select between Normal or Mirror camera image.
• Wallpaper - Select from three different wallpaper options.
• About - Select to view information about the unit.
• Default Value - Press OK to reset all data to the default value or CANCEL
to maintain current settings.
General Operation
Setup Menu

12
DXP1000DVR
General Operation
Clock:
• Format - Select between a 12HR or 24HR clock display.
• Go to DVR Settings to set the clock time.
Audio:
• Bass - Adjust the bass (-7 to 7).
• Middle - Adjust the mid (-7 to 7).
• Treble - Adjust the treble (-7 to 7).
• Subwoofer - Adjust the following subwoofer options.
- Volume Adjust subwoofer volume (Off to 12).
- Frequency - Select Flat, 80Hz, 120Hz or 160Hz.
- Subwoofer - Turn subwoofer On or Off.
• EQ - Select between User, Jazz, Classic, Pop, Rock, Beat and Flat.
• Loudness - Select between Off, Low or High.
• Fader/Balance - Adjust Fader between front and back and Balance
between Left and Right.
• Audio Mix - Simultaneously play DualMirror mode and audio source
(radio, USB, etc.)
- Mix Output - Turn mix output On or Off.
- Mix Volume - Adjust mix volume between 0 and 47.
- Mix Ratio - Adjust mix ration between 0 and 100%.
Video:
• Color - Drag to adjust between -16 and 16.
• Brightness - Drag to adjust between -16 and 16.
• Contrast - Drag to adjust between -16 and 16.
• Tint - Drag to adjust between -16 and 16.
Bluetooth:
• Bluetooth - Turn Bluetooth functionality On or Off.
• Auto Connect - Turn auto connect feature On or Off.
• Auto Answer - Turn auto answer feature On or Off.
Language:
• English - Set the unit language to English, French, Spanish or Korean.
Setup Menu

13
DXP1000DVR
Select the Radio icon from the Main Menu screen.
Press to return to Main Menu screen.
Displays current mode of operation.
This icon will flash when the DVR is recording in the background.
Press << to tune radio to a lower frequency. Press < to tune the unit
down one step at a time.
Press >> to tune radio to a higher frequency. Press > to tune the unit up
one step at a time.
Press to access the Phone when Bluetooth is enabled. If Bluetooth is
turned off, pressing this button will turn it on.
Press to display the six preset stations stored in memory in the current
band. To store a preset station, tune unit to desired station, then press
and hold the desired preset button to store the current station in that
preset spot. Up to 18 FM and 12 AM stations can be stored in memory.
Momentarily press any preset station to play it instantly.
Press to mute the unit's sound. Press again to unmute, or sound can be
restored by adjusting the volume on the front panel.
Press to adjust Audio options as described on page 10.
Press to scan preset stations and listen to the first 10 seconds of each.
Press again to stop scanning and listen to the station. Press and hold to
automatically find and store the strongest stations as presets.
Press to select between two AM and three FM bands.
Press to see the next screen of options.
Radio Operation
Main Menu 1
Current Mode Indicator 2
DVR Recording 3
Tune Frequency Down 4
Tune Frequency Up 5
Phone 6
Preset Stations 7
Mute 8
Audio Control 9
Automatically Store /
Preset Scan 10
Band 11
Next Options 12
5
1
4
2
8
AM/FM Tuner Operation
67911 10 11
3

14
DXP1000DVR
Press to toggle between LOCAL and DX (distance) tuning.
Press to adjust Loudness levels Low, High or Off.
Press to access Subwoofer adjustment menu.
Press to select Program Type / Genre.
Press to select Alternative Frequencies.
Press to turn on/off Traffic Announcements.
Press to adjust the screen brightness Down.
Press to adjust the screen brightness Up
Local / Distance 13
Loudness 14
Subwoofer 15
Program Type (PTY) 16
Alternative Frequencies 17
Traffic Announcements 18
LCD Brightness Down 19
LCD Brightness Up 20
AM/FM/RDS Tuner Operation
16
14 15
13 20
18 19
17

15
DXP1000DVR
USB Operation
USB/microSD Operation
Main Menu 1
Current Mode Indicator 2
Phone 3
Previous File/Track 4
Mute 5
Elapsed Time Indicator 6
Audio Control 7
Play 8
Repeat 9
Next File/Track 10
Random 11
Folder Access 12
Next Options 13
To play audio files or MP3 files from a USB device, insert the device and
playback will begin automatically. To return USB playback from another
mode of operation, select the corresponding icon from the Main Menu.
• USB Playback - Insert a USB device into the rear USB port.
Press to return to Main Menu screen.
Displays current mode of operation.
Press to access the Phone when Bluetooth is enabled. If Bluetooth is
turned off, pressing this button will turn it on.
Press to go back to the previous file or track.
Press to mute the unit's sound. Press again to unmute, or sound can be
restored by adjusting the volume on the front panel.
Shows the elapsed time and time remaining for the current track.
Press to adjust Audio options as described on page 10.
Press to pause or resume playback.
Press to select a repeat option: Repeat 1, Repeat Folder or Repeat Off.
Press to advance to the next file or track.
Press to enable or disable random playback.
Press to access the current folder to quickly see and select files.
Press to see the next screen of options.
12
43 5 6 7 8 9 10 11 13
12

16
DXP1000DVR
USB Operation
Previous Options 14
Rewind 15
Fast Forward 16
Loudness 17
Subwoofer 18
Alternative Frequencies 19
Traffic Announcements 20
LCD Brightness Down 21
:CD Brightness Up 22
Press to see the previous screen of options.
Press to fast reverse the current track at various speeds: FRx2,
FRx4, FRx8 or FRx16.
Press to fast forward the current track at various speeds: FRx2,
FRx4, FRx8 or FRx16.
Press to adjust Loudness levels Low, High or Off.
Press to access Subwoofer adjustment menu.
Press to select Alternative Frequencies.
Press to turn on/off Traffic Announcements.
Press to adjust the screen brightness Down.
Press to adjust the screen brightness Up.
1615 17 1814 2019 21 22

17
DXP1000DVR
DVR Operation
Main Menu 1
Current Mode Indicator 2
Screen Options 3
Bluetooth Phone 4
Record 5
Play 6
Settings 7
The unit's DVR feature allows for recording and playback of video.
Press to return to Main Menu screen.
Displays current mode of operation.
Press either DVR1 or DVR2 to display a full-screen view of the
selected view.
While in full-screen mode, press the touch screen to return to the
normal view.
Press to access Bluetooth calling.
Press to start recording. Press again to stop recording and save.
Press to play back recorded videos.
Press to access and adjust DVR settings.
DVR Operation
12
675 7
4
3

18
DXP1000DVR
DVR Operation
From the main video screen, press the scroll arrows up or down to
scroll through and view all recorded videos.
Select file to playback/delete.
From the main video screen, press to delete the selected video(s).
While viewing selected video, press to delete the selected video.
While viewing selected video, press to return to the previous video.
While viewing selected video, press to start or pause playback.
While viewing selected video, press to advance to the next video.
While viewing selected video, press to watch in full screen mode.
During full-screen playback, touch the screen to access video
controls.
The following options will appear along the bottom of the screen to
allow control of video playback: Previous, Rewind, Play/Pause, Fast
Forward Next and Return (go back to previous screen).
Scroll 8
Select 9
Select & Delete 10
Delete Current VIdeo 11
Previous 12
Play/Pause 13
Next 14
Full Screen 15
910 1211 13 814 15

19
DXP1000DVR
2-Way DualMirror™ Operation
Cable Number Devices Product Description Wire Length
SL55A Android 5-pin microUSB connector to HDMI + US
B5
ft
SL113A Android 11-pin microUSB connector to HDMI + US
B3
ft
SL115A Android 11-pin microUSB connector to HDMI + US
B5
ft
DL5i iOS HDMI cable & USB cabl
e5
ft
Mirror Link
1. Click QR code icon on HOME screen on page 3.
2. When QR code shows up, scan the QR code on the Android phone
.
3. Download DualMirror.apk from Google Play Store.
4. When the download is complete, the DualMirror APP icon is
created on main menu.
5. Select DualMirror App installed in the Android phone.
6. Tap OPEN BT SETTING to move to Bluetooth setting mode
7. Pair the Android phone with the unit via Bluetooth.
8. Connect Android phone to the unit using the Dual SL cable or using
wireless screen mirroring and DMH25 dongle.
9. Select DUAL MIRROR Mode.
10. Tap ACCEPT on Warning screen .
*.
Note : If the 2-way control is not working, verify that the DualMirror
app is
running prior to connecting the phone to the unit and make
su
re that the Bluetooth is paired/connected and the status on the
app also sa
ys "Connected".
Remark:
For the 2-way control feature, here is how to setup and connect your Android device.
*. Currently IOS is not compatible for 2-way control.
The DualMirror technology requires the following cables which are sold separately.
TM
The DualMirror technology allows you to mirror the screen of select Android smartphones as
well as iPhone, iPod and IPad devices onto the receiver’s screen and to charge your mobile device
through the front USB port. Simply plug in your device to the front HDMI and USB inputs,
and you
are ready to view
your favorite navigation or music apps directly on the receiver’s screen.
TM
Wireless WiFi Android/Video and Mrroring Dongle
For Android/
iOS devices
DMH25
Note: For wireless mirorring, Android phones must support Miracast to work. Please check your
phone manufacturer's specifications for compatibility. Apple Airplay/Mirorring is supported.