Navman Smart V3 User manual

Smart™ V3
for Palm OS® 5
User Manual
English

3
Smart V 3.0 | User Manual for Palm OS® 5
Contents
1. Introduction ..............................................................5
2. Installing Smart ....................................................6
3. Smart Desktop .....................................................7
4. Installing Maps Using Smart Desktop ..................8
5. Starting Smart ......................................................9
6. Controlling Smart ...............................................10
7. Main Menu Screen .................................................11
8. GPS Status ............................................................11
9. Setting your Destination .........................................13
10. Avoiding an Area ....................................................18
11. Viewing your Route ................................................19
12. Map Screen Pop-up Menu ....................................24
13. Route Demonstrator ..............................................25
14. Trip Meter ...............................................................26
15. Favourites and Quick Navs ....................................27
16. Settings ..................................................................29
17. Smart Desktop Advanced Features ...................35
18. Continuous Continental Navigation ........................37
19. Improving Performance ..........................................38
20. Accessories ...........................................................38
21. Support Information ...............................................40

4
Smart V 3.0 | User Manual for Palm OS® 5

5
Smart V 3.0 | User Manual for Palm OS® 5
1. Introduction
Whether you travel in your own country, or overseas, Smart™ will direct you to your destination without the need for
map books and second-hand instructions.
The Global Positioning System is available free of charge, at any time, and depending on your GPS receiver, may be
accurate to within 5 m (15 ft). Smart maps provide street level detail for door-to-door navigation, including Points of
Interest (POIs) such as accommodation, railway stations and airports.
Use this manual to help you install Smart, learn how to operate it effectively and safely and discover the range of
features available to you.
GPS and GPS Signals
The Global Positioning System (GPS) is a network of satellites that transmit accurate time and position information
worldwide. GPS receivers receive signals from these satellites, and use the information to determine an exact
location.
GPS satellites orbit the Earth at around 12,000 miles. While a GPS receiver can detect signals from up to 12 satellites
at any time, only three are needed to provide the two-dimensional position or “fix” (latitude and longitude) required for
vehicle navigation systems. GPS data is available free of charge for any user.
Smart is designed to use GPS information to find your current position, and calculate the best route to your
desired destination using the available road maps. Smart will then guide you with voice and visual commands to
your destination using the continuous stream of GPS data to track your position.
Safety Notice
In a vehicle, it is your sole responsibility to place, secure and use your handheld in a manner that will not cause
accidents, personal injury or property damage. The user of this product is solely responsible for observing safe
driving practices.
It is your sole responsibility to adhere to the following safety instructions at all times:
• Do not operate Smart while driving.
• Do not mount your GPS receiver or handheld in a way that interferes with airbags or other safety equipment.
• Do not use or handle your GPS receiver or handheld when it is hot; leave it to cool out of direct sunlight.
Navman disclaim all liability for use of this product in a way that may cause accidents or damage or that may violate law.

6
Smart V 3.0 | User Manual for Palm OS® 5
2. Installing Smart
Begin by installing Smart Desktop on your computer. Then install and register Smart on your handheld, activate and
download the maps you require from Smart Desktop. You will need an Internet connection to complete activation.
Note: Windows® XP® users, ensure XP® Service Pack 1 or higher is installed before you install Smart Desktop.
1. Close all open programs on your computer.
2. Plug your memory card reader (enclosed) into the USB port on your computer.
Note: Sony® CLIÉ™ users can use MS Import or Data Import instead of the memory card reader.
3. Insert the Smart CD into your computer CD-ROM drive. The Smart Desktop installer will start.
• If your computer does not automatically launch the CD, start the installation manually: Start > Run.
Type d:\setupSSP_PALM.exe where d is the letter assigned to your CD-ROM drive. Click OK.
4. Follow the screen prompts to install Smart Desktop.
• Select your preferred language for Smart Desktop when prompted.
• Review and accept the License Agreement when prompted. If you have any queries, contact Navman.
• Select a destination folder when prompted.
• Select your Palm User Account when prompted.
• Perform a HotSync® operation when prompted.
5. Smart Desktop will open. Follow the prompts to register online and activate Smart on your handheld.
• Review and accept the Privacy Notice when prompted.
• You will be prompted to enter your contact details so Navman can advise you when updates are released.
• Enter your Smart Application Key.
• Your computer will connect to the Internet and activate your Smart Application Key.
You are now ready to install a map to your handheld.
Additional Information for Tungsten™ T3
Smart supports the larger resolution display available to users of the Tungsten T3 handheld. Two extra files must
be installed to enable full-screen viewing on Tungsten T3:
1. Install Smart as per the above instructions.
2. Start Palm Quick Install.
3. Click Add and navigate to the following folder:
C:\Program Files\Navman\Navman SmartST Desktop Version 3 for
Palm\T3_Large_Screen_Support
where C: is the drive that Smart Professional was installed to.
4. Select the following two files by pressing and holding CTRL when you click
them:
• AppSlipRotate.prc
• StatusBarLib.prc
Warning - You must install these two files at the same time. If both are not installed during the same HotSync®
operation (see step 6), it may force a hard reset of your Tungsten T3, causing loss of data.
5. Click Open.
The files are now listed in the Handheld section of Palm Quick Install.
6. Perform a HotSync operation to install the selected files on your Tungsten T3.
7. Follow the handheld screen prompts.
You may now view Smart in full-screen by tapping . See your Tungsten T3 documentation for more
information.

7
Smart V 3.0 | User Manual for Palm OS® 5
3. Smart Desktop
Smart Desktop is used to manage maps to and from your handheld, obtain software updates, manage Custom
Points of Interest (POIs) and install Basemaps.
Accessing Smart Desktop
Once Smart Desktop has been installed, you can access it from the Start menu:
Start > Programs > Navman > Smart Desktop
Updating Smart
It is recommended that you regularly check the Navman website for software updates to the version of Smart you
are using:
Note: Only upgrades to the Smart application are available from the Navman website. Map upgrades must be
purchased from your Navman retailer.
1. Open Smart Desktop: Start > Programs > Navman > Smart Desktop
2. Follow the screen prompts until they finish. The Smart Desktop will appear.
2. On the Setup menu, select Update software then Check for updates on the web.
Your computer will connect to the Internet and display the Navman website.
3. Download the update for your region to your computer, if available.
4. On the Setup menu, select Update software then Update software on handheld.
Follow the prompts to update Smart.
Information about the map
Selected maps
Download selected maps to
memory card
Maps are coloured to indicate
whether they are:
• Selected,
• Installed,
• Available on CD,
• Available from Navman, or
• Not available

8
Smart V 3.0 | User Manual for Palm OS® 5
4. Installing Maps Using Smart Desktop
Smart comes with one Map Product Key that will allow you to install one map. If you require an additional map, you
must first purchase an additional Map Product Key from your Navman supplier.
Use Smart Desktop to activate your Map Product Key and install the required map.
Install and Activate Maps on Your Handheld
1. Insert a memory card in your memory card reader.
2. Connect your handheld to your computer using a USB cable, synchronisation cradle, or other device that came
with your handheld.
3. Activate a HotSync® operation between your computer and your handheld.
4. Once the HotSync operation is complete, open Smart Desktop:
Start > Programs > Navman > Smart Desktop.
5. Follow the prompts.
• Smart Desktop will open.
6. Insert a Smart Map CD into your computer CD-ROM drive. The available maps will display.
Note: Smart will support maps from Smart 1.30 and later.
7. Click the map you want to install to your handheld. Maps are of population areas and not of political areas such
as counties or states. You may need to install multiple maps to cover the desired geographical area.
• If you have already activated a Map Product Key, or your handheld came with a pre-activated Map Product
Key, the map will change colour to indicate it has been selected. Go to step 10.
8. Follow the prompts to activate the Map Product Key.
• Enter your Map Product Key.
• Your computer will connect to the Internet and activate your Map Product Key.
• You will be prompted to enter or update your contact details so Navman can advise you when updates are
released.
• Your computer will again connect to the Internet to confirm the activation of your Map Product Key.
9. Click the map to install to your handheld. The map will change colour to indicate it has been selected. The map
is listed in the Selected section of the Desktop Selected Maps tab.
• If you have another Map Product Key to activate, go to step 7.
10. Click the Add to Card button to install all maps listed in the Selected section of the Desktop Selected Maps
tab to your memory card reader.
11. When you have completed map installation, remove the memory card from your memory card reader and
insert it into your handheld.
Remove Maps from Your Handheld
1. Insert the memory card into your memory card reader.
2. Open Smart Desktop: Start > Programs > Navman > Smart Desktop.
3. Open the Maps on Palm section: Palm tab > Maps on Palm.
4. Click the map to be removed and select Remove from Palm from the pop-up menu.

9
Smart V 3.0 | User Manual for Palm OS® 5
5. Starting Smart
By now, you have installed Smart Desktop on your computer, installed Smart on your handheld, installed any
required maps to your memory card and mounted your GPS receiver in your vehicle, if required. You are now ready to
start Smart and establish a connection between your handheld and GPS receiver.
1. On the handheld Home screen, tap the SmartST icon (a).
2. The Legal Notice screen will display. Read the legal notice and tap I Agree to confirm that you understand.
3. The Tutorial will display. Tap to move through the screens.
• To prevent the Tutorial from displaying, select the Show tutorial on startup checkbox.
4. The Main Menu screen will open.
You are now ready to obtain a GPS fix.
a

10
Smart V 3.0 | User Manual for Palm OS® 5
6. Controlling Smart
Navigation
Icons display on the Map, 3D Map, Next Instruction and Turn List View screens for screen navigation. Additionally, on
handhelds with a 2-way or 5-way toggle, screen navigation may be undertaken using the toggle buttons. See your
handheld manual to identify whether your handheld has a toggle.
Icon Toggle Description
Right
Cycles through the navigation screens once a route has been calculated:
• Map screen
• 3D Map screen
• Next Instruction screen
• Turn List View screen
Left Opens the Main Menu screen.
Up
From the Map screen, enables you to zoom in to view less of the street map, but with more
detail.
From the 3D Map screen, with the Information button set to Angle, enables you to
increase the viewing angle.
Down
From the Map screen, enables you to zoom out to view more of the street map, but with
less detail.
From the 3D Map screen, with the Information button set to Angle, enables you to
decrease the viewing angle.
Touch-Screen
Use the stylus with the handheld touch-screen to navigate and use the Main Menu options, set destination
addresses and configure the GPS status. See your handheld manual for information on using the stylus with the
touch-screen.
Tap and hold the stylus on the Map screen to activate the pop-up Map menu. See page 24 for information on the
pop-up Map menu.
5-way toggle

11
Smart V 3.0 | User Manual for Palm OS® 5
7. Main Menu Screen
The Main Menu screen gives you access to all of Smart’s functions, including navigating to a destination.
1. From the Map screen, tap to open the Main Menu screen.
2. Tap , to display more Main Menu options.
8. GPS Status
Signals are transmitted by Global Positioning System (GPS) satellites orbiting the Earth. This screen provides a visual
representation of the information being received. Latitude and longitude are displayed, along with a North-pointing
compass, the heading in degrees and ground speed. Satellites available are shown as segments.
From the Main Menu, tap GPS Status. The GPS Status screen will display:
• Yellow Segment - a satellite is being tracked but is not being used
• Red Segment - a satellite is being used to determine a two-dimensional (2D) position fix.
• Green Segment - a satellite is being used to determine a three-dimensional (3D) position fix.
The circle under the satellite segments is green when there is a valid fix (2D or 3D) and red when there is no fix.
While a 2D fix is sufficient to maintain a valid fix, a 3D fix is more accurate.
Latitude and longitude of current
position;
Tap to toggle the units displayed
between degrees, minutes
and decimal seconds; decimal
degrees; degrees and decimal
minutes
Each segment represents a satellite
Type of fix
A green circle indicates the GPS
Receiver has a valid fix;
A red circle indicates no valid fix
Coordinated Universal Time (UTC)
and date
Number of satellites used in GPS fix
North-pointing compass
Ground speed
Indicates whether the COM port is open

12
Smart V 3.0 | User Manual for Palm OS® 5
Getting a GPS Fix
For Serial GPS Receivers
1. From the Main Menu, tap Setup.
2. Tap in the upper right-hand corner, then select GPS from the drop-down box. The GPS Setup screen will open.
3. Tap Serial in the Port section.
4. Refer to the instructions supplied with your GPS receiver to select the Baud rate.
5. Tap to return to the Main Menu.
6. Tap , then GPS Status to open the GPS Status screen.
7. Tap the GPS On checkbox to open the COM port. Your handheld will now obtain a GPS fix. A clear view of
the sky is required.
For Bluetooth GPS Receivers*
Initialisation
1. From the Main Menu, tap Setup.
2. Tap in the upper right-hand corner, then select GPS from the drop-down box. The GPS Setup screen will open.
3. Tap Bluetooth in the Port section.
4. To connect the handheld to your GPS receiver, tap Discover. The handheld will search for active Bluetooth devices.
5. Select the name of your GPS receiver in the Device section and tap Select. Your handheld will now obtain a
GPS fix. A clear view of the sky is required.
6. Tap to return to the Main Menu.
Reconnecting*
1. From the Main Menu, tap , then GPS Status to open the GPS Status screen.
2. Ensure that the GPS On checkbox is ticked. Your handheld will now obtain a GPS fix. A clear view of the sky
is required.
3. Tap to return to the Main Menu.
*To re-establish a lost or closed GPS fix.
GPS Status Messages
The GPS status messages are displayed on the Map and 3D Map screens.
These messages provide feedback on the status of the GPS receiver connection.
The following table explains the meaning of these messages and includes suggested actions.
Status Message Meaning Suggested Action
Waiting for GPS A GPS position fix has not
yet been established.
Ensure the GPS On checkbox on the GPS Status screen
is selcted and the GPS receiver has an unobscured view of
the sky.
If you are in a vehicle with athermic (heat-reflecting)
windows, you may require an external GPS antenna
(sold separately).
GPS Signal Lost Your GPS fix has been lost. Ensure the GPS receiver has an unobscured view of the sky.
No GPS
Message
You have a valid GPS
position fix and GPS data is
being received.
No action required. You can navigate to your destination.

13
Smart V 3.0 | User Manual for Palm OS® 5
9. Setting your Destination
Before you travel, you must specify a destination for Smart to plan your route.
Note: Depending on the country of destination, one or more fields may not be available when selecting your destination.
To a Street Address
1. From the Main Menu, tap Destination, then Address. The Destination Address screen will open.
2. Select a country from the Country drop-down box.
3. Type and select the destination address:
• To select a post code or zip code, type up to five characters of the post code in the Post Code box, or the
zip code in the Zip Code box. Select the post code or zip code from the list that displays.
Note: When navigating in the United Kingdom, type the post code with spaces, but without the last two letters.
• To select an area, type the name of a geographical location such as a town, city, state or county in the Area
box. Select the area from the list that displays.
• To select a road, type the name of a road in the Road box. Select the road from the list that displays.
• To select a house number, type the house number in the House No box. Select the road from the list that
displays.
4. Complete one of the following:
• To calculate and display the route to the address, tap . The 3D Map screen will open.
• To display the address without calculating the route, tap . The Map screen will open.
• To add the address as a favourite, tap .
• To configure routing settings, tap . The Routing Setup screen will open.

14
Smart V 3.0 | User Manual for Palm OS® 5
To the Intersection of Two Streets
1. From the Main Menu, tap Destination, then Intersection. The Destination Intersection screen will open.
2. Select a country from the Country drop-down box.
3. Type and select the destination address:
• To select an area, type the name of a geographical location such as a town, city, state or county in the Area
box. Select the area from the list that displays.
• Type the name of one of the intersecting roads in the Int. of box. Select the road from the list that displays.
• Tap the And box. A list of roads that intersect with the road specified in the Int. of box will display. Select a
road from the list that displays.
4. Complete one of the following:
• To calculate and display the route to the intersection, tap . The 3D Map screen will open.
• To display the address without calculating the route, tap . The Map screen will open.
• To add the intersection as a favourite, tap .
• To configure routing settings, tap . The Routing Setup screen will open.
To a Point of Interest (POI)
A POI is a named site, feature, landmark or public venue. POIs are stored in Categories, such as parks and
museums. POIs can be displayed as icons on a map.
Note: You can also navigate to a POI via the pop-up Map menu. See page 24.
1. From the Main Menu, tap Destination, then Points of Int. The Points of Interest screen will open.

15
Smart V 3.0 | User Manual for Palm OS® 5
2. Type and select the POI search criteria:
• Select a category of POI from the Category drop-down box.
• Select a type of POI from the Type drop-down box.
• Select a country from the Country drop-down box.
• Type the name of a geographical location such as a town, city, state or county in the Area box. Select the
area from the list that displays.
3. Tap to open the Points of Interest Results screen displaying your search results.
4. Select a POI from the list of search results. Only the first 100 search results will display.
• If the list is long, begin typing the name of the POI in the Name box. The list of POIs will reduce to match your
search.
5. Complete one of the following:
• To calculate and display the route to the POI, tap . The 3D Map screen will open.
• To display the address without calculating the route, tap . The Map screen will open.
• To add the POI as a favourite, tap .
• To view POI information, tap . The Points of Interest Information screen will display.
To a Destination Using Palm Contacts
Addresses stored in your Palm Contacts database can be used to set a destination. The contact address must be
applicable to an installed map.
1. From the Main Menu, tap Destination, then Contacts. The Find Contact screen will open.
2. Type the surname of your contact in the Surname box. Select the contact name from the list that displays. The
address will automatically appear below.
3. Confirm that the correct details are displayed. Tap .
• If the details of the contact address are incorrect they will display in red. A correct address from the handheld
Contacts file may not precisely match the Smart database. In this case, tap to the right of the Road,
Area or Country drop-down boxes. A list of options should display. If not, type the address or select from
the list that displays.
4. Complete one of the following:
• To calculate and display the route to the contact address, tap . The 3D Map screen will open.
• To display the address without calculating the route, tap . The Map screen will open.
• To configure routing settings, tap . The Routing Setup screen will open.

16
Smart V 3.0 | User Manual for Palm OS® 5
To a Recent Destination
The last 20 routes are stored as recent destinations.
1. From the Main Menu, tap Destination, then Recent. The Recent Destinations screen will open.
2. Select a destination from the list.
3. Complete one of the following:
• To calculate and display the route to the Recent Destination, tap . The 3D Map screen will open.
• To display the address without calculating the route, tap . The Map screen will open.
• To configure routing settings, tap . The Routing Setup screen will open.
Multiple Destination Points with the Trip Planner
You can use the Trip Planner to set multiple destination points for your trip. Smart will calculate a route via each
of these points in the specified order. Destination points can be added via the Trip Planner screen or by selecting
Add to Trip from the Map pop-up menu. A maximum of sixteen destination points may be added to each trip.
Creating a Trip
1. From the Main Menu, tap Trip Planner. The Trip Planner screen will display.
2. Tap to add a destination point. The Destination screen will open.

17
Smart V 3.0 | User Manual for Palm OS® 5
3. Tap Address. The Destination Address screen will open.
Note: You can also add destination points using Intersections, Points of Interest, Favourites, your Palm
Contacts database and recent destinations.
4. Select a country from the Country drop-down box.
5. Type and select the destination address:
• To select a postcode or zip code, type up to five characters of the postcode in the Postcode box, or the
zip code in the Zip Code box. Select the postcode or zip code from the list that displays.
Note: When navigating in the United Kingdom, type the post code with spaces, but without the last two letters.
• To select an area, type the name of a geographical location such as a town, city, state or county in the
Area box. Select the area from the list that displays.
• To select a road, type the name of a road in the Road box. Select the road from the list that displays.
• To select a house number, type the house number in the House No box. Select the road from the list that
displays.
6. Tap . The destination point is added to your trip. The Trip Planner screen will display.
• To add another destination point, go to step 2.
7. To manage the trip, tap to the right of the point. The pop-up Trip Planner Menu will display.
• To move a point up, select Move Up.
• To move a point down, select Move Down.
• To delete a point, select Delete.
• To delete all points, select Clear All.
• To skip all prior destination points, select Skip To.
8. To save the trip to your handheld or memory card:
• Tap . The Trip Name screen will open.
• Type a name for the trip in the Trip Name box.
• Tap , then tap . The Trip Planner screen will display.
9. Tap . The 3D Map screen will open. Smart will calculate and display the trip.
Loading a Trip
1. From the Main Menu, tap Trip Planner. The Trip Planner screen will display.
2. Tap and select the trip to be loaded from the drop-down box.
3. Tap . The 3D Map screen will open. Smart will calculate and display the trip.
Using the Map or 3D Map Screen to Plan a Route
You can plan a route directly from the Map or 3D Map screen using the pop-up Map menu. For more
information on the pop-up Map Menu, see page 24.
1. From the Main Menu, tap Map.
2. Scroll the map by dragging the stylus and then lifting it off the map. Repeat until your destination is visible.
• Zoom in or out of the map as required to locate your destination using to zoom in and to zoom out.
3. Tap and hold the road or POI icon that represents your destination. The pop-up Map Menu will display.
4. Select Navigate to from the pop-up Map menu. Smart will calculate and display the route to your
destination.

18
Smart V 3.0 | User Manual for Palm OS® 5
10. Avoiding an Area
Smart enables a route to be calculated that avoids a specified area on the map. Up to 10 Avoid Areas can be added.
Avoid Areas are displayed as shaded areas.
Adding an Avoid Area
1. From the Main Menu, tap Map.
2. Tap and hold the area that you want to avoid.
3. Select Add Avoid Area from the pop-up Map menu. An Avoid Area is displayed.
4. Set the Avoid Area to the correct size and position.
• To position the Avoid Area, tap and drag it to the area you want to avoid.
• To size the Avoid Area, tap and drag the sizing boxes to the size required.
5. Tap the below the Avoid Area to enable it.
Deleting an Avoid Area
1. From the Main Menu, tap Map.
2. Tap and hold the Avoid Area that you want to delete.
3. Select Delete Avoid Area from the pop-up Map menu. The Avoid area is deleted.
Deleting all Avoid Areas
1. From the Main Menu, tap Map.
2. Tap and hold the Map screen outside of an Avoid Area.
3. Select Clear Avoid Areas from the pop-up Map menu. All Avoid areas are deleted.

19
Smart V 3.0 | User Manual for Palm OS® 5
11. Viewing your Route
Once a route has been calculated, there are several ways to view it. Cycle through the screens by tapping .
Map Screen
The Map screen is always oriented North, and shows your current position and surrounding street names. If the
route has been calculated, the route and all turns are highlighted.
• To view the Map screen, either tap to cycle through the screens until the Map screen is displayed, or tap Map
on the Main Menu.
• Zoom in and out by tapping to zoom in and to zoom out.
• Navigate around the map by dragging the stylus across the screen.
• Tap and hold to access the Map pop-up menu.
Your current position
is marked with .
Your next turn is highlighted
in a different colour to future
turns. The colour will depend
on the theme you are using.
Your current location.

20
Smart V 3.0 | User Manual for Palm OS® 5
3D Map Screen
The 3D Map screen displays when a route is calculated, oriented to the travelling direction with an adjustable
horizon.
• To view the 3D Map screen, either tap to cycle through the screens until the 3D Map screen is displayed, or
tap Map on the Main Menu.
• Zoom in and out by tapping to zoom in and to zoom out.
• To change the viewing angle, set the Information button to Angle, then use to decrease the angle and to
increase the angle, or tap and hold the angle number to the right of the Information button, moving the slider
left to decrease the angle and right to increase the angle.
• Tap and hold to access the Map pop-up menu.
Your current position
is marked with .
Your next turn is highlighted
in a different colour to future
turns. The colour will depend
on the theme you are using.
Distance to next turn.
Direction of next turn.
Tap to hear the next
instruction.
Information Button
Tap to cycle through the following
display options:
• Speed
• Time
• Heading (HDG)
• Distance to go to destination (DTG)
• Expected time of arrival at
destination (ETA)
• Time to go to destination (TTG)
• Angle
Your current location.