Naxa NX-556 User manual

MODEL :NX 556-
19" Widescreen HD
LCD TV with DVD Player

Unit and Accessory
Product Feature
Getting Started
Front VIew
Rear View
Remote Control Key Functions
Menu Operation
Basic operation
Video menu options
Audio menu options
Setup menu options
Parental menu options
DVD Operation
Additional operation
DVD System Operation
Disc Care
Simple Troubleshooting
Techincal Specifications
3
3
4
4
5
6
8
8
10
11
12
14
17
18
21
23
24
25
1
2
Caution
Safety Information

caution
Caution
The lightening flash with arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of un-insulated "dangerous voltage"
within the products enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to the persons.
The exclamation point within an equilateral triangle is intend to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Correct disposal of this Product
Waste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life,
should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste
collection/recycling centre.
In the European Union there are separate collection systems for used electrical
and electronic products. Please help us to conserve the environment we live in!

Safety Information
To ensure reliable and safe operation of this equipment, please read carefully all the
instructions in this user guide, especially the safety information below.
Electrical safety
The TV set should only be connected to a mains supply which matches that stated on
the label.
To prevent overload, don't share the same mains supply socket with too many other
items of equipment.
Do not place any connecting wires where: they may be stepped on or tripped over.
Do not place heavy items on them, which may damage the leads.
Hold the main plug, not the wires, when removing from a socket.
During a thunderstorm or while leaving the TV for long periods, set the switch off.
Do not allow water or moisture to enter the TV or mains adaptor. Do NOT use in wet or
moist areas, such as Bathrooms, steamy kitchens or near swimming pools.
Pull the plug out immediately, and seek professional help if: the mains plug or cable is
damaged, liquid is spilt onto the set, or if it is accidentally exposed to water or moisture,
anything accidentally penetrates the ventilation slots, the set doesn't work normally.
Do not remove the safety covers. There are no user serviceable parts inside. You may
invalidate the warranty. This apparatus must only be serviced by qualified personnel.
To avoid battery leakage, remove exhausted batteries from the remote control, or when
not using far a long period.
Do not break open or throw exhausted batteries on a fire.
Physical safety
Do not block ventilation slots in the hack cover. You may place the TV in a cabinet, but
ensure at least 5cm (2") clearance all around.
Do not tap or shake the TV screen, or you may damage the internal circuits. Take good
care of the remote control.
To clean the TV use a soft dry cloth. Do not use solvents or petrol based fluids.
Do not install near any heat sources such as radiators, heat registers stoves or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong, the wide blade or the third prong is provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs.
Use only attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the appara-
tus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, has been exposed to
rain or moisture, does not operate normally or has been dropped.
Please always connect an apparatus with Class I structure to a main socket with protec-
tive earthing connection.
Please make sure both main plug and appliance coupler work properly.

Unit and Accessory and Product Feature
Mains cable
Mains adaptor
TITLE MENU
LCD-
MENU
INPUT PMODE SMODE MUTE
CC MTS GOTO SUBTITLE
PROGRAM INTRO REPEAT A-B
ZOOM ANGLE
PLAY
/PAUSE SLOW /STEP AUDIOSTOP
DVD-
SETUP

Getting Started
Getting Started
CH
VOL
Power
MENU
TV/AV
(IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby) LED Indicator: Press POWER to turn on and off,
Indicator on(Red) Standby mode
Indicator on(Green) Power on mode
Please insert a 12cm disc
according to the silk
Play the next track or chapter
Play the previous track or chapter
Eject the disc
Play the disc playing
Pause the disc playing
Stop the disc playing

5
Getting Started
Name Function Description
POWER (DCIN)
VGA IN
HDMI IN
VGA signal from computer output
YPbPr Connect to the composite terminal of your DVD/VCR
S-Video IN S-Video signal input
Video IN Video signal input
(AUDIO)L/R Audio signal input for AV
PC Audio in PC audio input
Headphone Connect it to your headphone or other audio equipment
RF Connect to antenna or cable source
Coax out Digital coaxial output.
Connect to Mains Adapter
Connect to HDMI of DVD or other equipment
DVD
8
8

TITLE MENU
LCD-
MENU
INPUT PMODE SMODE MUTE
CC MTS GOTO SUBTITLE
PROGRAM INTRO REPEAT A-B
ZOOM ANGLE
PLAY
/PAUSE SLOW /STEP AUDIOSTOP
DVD-
SETUP
TITLE
MENU
VOL+/-
CH+/-
NUMBER BUTTONS
POWER
AUTO EJECT
DVD play list/ DISC menu.
DISPLAY
Press to display the source and channel’s
information.
Remote Control Key Functions
6
Press to increase/decrease the sound level.
Press to select the DVD title.
Press this button to enter a program numberfor
multiple program channel such as 2-1,etc.
Return to the previous channel viewed.
Press 0-9 to select a TV channel directly when
you are watching TV. The channel change
after 2 seconds.
DVD eject.
Switch an LCD TV when at standby mode or vice
versa.
Press to scan through channels. To scan quickly
channels, press and hold down either+/-button.

TITLE MENU
LCD-
MENU
INPUT PMODE SMODE MUTE
CC MTS GOTO SUBTITLE
PROGRAM INTRO REPEAT A-B
ZOOM ANGLE
PLAY
/PAUSE SLOW /STEP AUDIOSTOP
DVD-
SETUP
LCD-MENU
DVD-SETUP
TV system setup.
DVD system setup.
MUTE
SMODE
PMODE
INPUT
THUMBSTICK
INTRO
If you play CD,it will scan program with 3S.
7
A-B
Select and play the preferable paragraph of DVD program
by pressing this key twice at the beginning and end of it.
REPEAT
Repeat playing the title or chapter.
PROGRAM
Select DVD picture angle.
ANGLE
Select DVD picture angle.
ZOOM
Select display mode:FULL/4:3 .
In DVD source this buttons to adjust DVD picture size.
DVD next chapter.
DVD previous chapter.
SUBTITLE
Select DVD disc subtitle.
GOTO
Play your favorite title/chapter/track.
MTS
DVD fast forward. / Press to select the audio channels.
CC
DVD fast reverse. / Press to display the closed caption.
AUDIO
Select DVD disc language.
SLOW/STEP
Play DVD programs at slow speed.
STOP
Stop DVD program.
Play/Pause
Play/Pause DVD program.
Press to mute the sound. Press again or press
VOL+ to unmute.
Press to cycle through the different sound settings.
Press repeatedly to cycle through the available
video picture modes.
Press to cycle through the input source in following:
Allows you to navigate the on-screen menus and
adjustthe system settings to your preference.

Press LCD-MENU to display the main menu.
Press repeatedly to select the SETUP(see the left picture), press ENTER or button to enter(see
picture right).
Select OSD LANGUAGE.
Press / button to select your desired language.
When you are satisfied with your choice, press the LCD-MENU..
Menu Operation
8
NOTE: If you use your LCD TV for the first time, you should select the language which will be used for displaying
menus and indications.
1. Press VOL+/- to adjust the volume.
2. If you want to switch the sound OFF, press the MUTE
3. You can cancel this function by pressing MUTE or VOL+ button.
OSD Language English
Time Setup
Caption
Reset Default
Setup
ENTER MENU
Enter Select Exit ENTER MENU Enter Select Exit
OSD Language English
Time Setup
Caption
Reset Default
Setup
TURN ON LCD TV
1. Connecting to the power with the mains adaptor and mains cable, At this time the TV will enter standby
mode and indicator show red.
2. Use POWER button can turn ON LCD TV from standby mode.
TURN OFF LCD TV
Press POWER button or button on the remote control to enter standby mode. The Indicator is red.

Press the LCD-MENU button to display the main menu.
Use buttons to select and adjust the available menus.
9
The OSD (On Screen Display) function enables you to adjust the screen conveniently since
it provides graphical presentation.
1. Using the CH+/CH- on the front panel or on the remote control.
Press CH+ to increase channel number.
Press CH - to decrease channel number.
2. Using 0-9 digital buttons and button
Enter the channel's number with 0-9 digital buttons and - button, then press "ENTER" button to play the
channel's program.
For example: 1. Press 4 button, then press "ENTER" button to play channel 4.
2. Press 4 button, and press 5 button, then press "ENTER" button to play channel 45.
3. Press 1 button, and press 2 button, and press 1 button, then press "ENTER" button to play
4. Press 1 button, and press 3 button, and press button, and press 4 button, then press
"ENTER" button to play channel 13-4.
channel 121.
ENTER MENU
Enter Select Exit
Picture Mode User
Brightness
Contrast
Saturation
Tint
Sharpness
Color Temperature
50
50
50
0
3
Video
ENTER MENU
Enter Select Exit
Password
Parental
ENTER MENU
Enter Select Exit
Setup
OSD Language English
Time Setup
Caption
Reset Default
ENTER MENU
Enter Select Exit
annetnAedoMrenuT
Channel Scan
Channel Skip
TV
ENTER MENU
Enter Select Exit
Balance
Bass
Treble
Sound mode Concert
SPDIF type PCM
0
50
50
Audio

Press the MENU on the front panel or LCD-MENU on the remote control and then use to select the
Video menu, press or ENTER button to enter it(see the picture below).
1. Use to select what you want to adjust in the
Video menu.
2. Press ENTER or / button to adjust(according to
the hint below).
3. When you are satisfied with your adjustment, press
LCD-MENU.
You can dispaly the input source menu by pressing the INPUT on
the remote control or TV/AV on the front panel, press button
to select, press “ENTER” button to confirm.
Picture Mode
Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in
PICTURE menu. You may select the picture mode directly by pressing the PMODE button on the remote
control.
Brightness
Press button and then use to adjust the brightness of the picture.
Contrast
Press button and then use to adjust the contrast of the picture.
Saturation
Press button and then use to adjust the saturation of the picture.
Tint
Press button and then use to adjust the Tint of the picture(in NTSC mode).
Sharpness
Press button and then use to adjust the sharpness level of picture.
Color Temperature
Press "ENTER" to enter the submenu.
Color Temperature: press button to select the mode
------User, Cool, Standard, Warm
And the “R Gain, G Gain, B Gain” numbers in “User” mode
is set by youself.
10
In this manual, the OSD(On Screen Display) may be different from your TV's because it Is just
an example to help the TV operation.
Video menu options
Color Temperature User
R Gain
G Gain
B Gain
0
0
-20
MENU
Select Back
MENU
Select Exit
Picture Mode User
Brightness
Contrast
Saturation
Tint
Sharpness
Color Temperature
50
50
50
0
3
Video

11
Audio Mode
You can select the type of sound which best corresponds to your listening requirements by selecting Sound
in SOUND menu. You may select the sound mode directly by pressing the SMODE button on the remote
control.
Balance
Press button and then use to adjust the audio output between left and right speakers.
Bass
Press button and then use increase or decrease the level of the lower-pitched sounds.
Treble
Press button and then use to increase or decrease the level of the higher-pitched sounds
Spdif Type
Press to select the one of mode of the digital audio output such as PCM and Dolby digital or off.
Tuner Mode
You can select the signal input mode: Antenna, Cable.
Channel Scan
Select “Channel Scan”, press ENTER button to start the channel scan. Press LCD-MENU to stop or it
will not stop untill the scan is finished.
Audio menu options
Press the MENU on the front panel or LCD-MENU on the remote control and then use to select the
AUDIO menu, press or ENTER button to enter it(see the picture below).
1. Use to select what you want to adjust in the
Audio menu.
2. Press ENTER or / button to adjust(according to
the hint below).
3. When you are satisfied with your adjustment, press
LCD-MENU..
TV menu options
Press the MENU on the front panel or LCD-MENU on the remote control and then use to select the
TV menu, press or ENTER button to enter it(see the picture below).
1. Use to select what you want to adjust in the TV
menu.
2. Press ENTER or / button to adjust(according to
the hint below).
3. When you are satisfied with your adjustment, press
LCD-MENU..
annetnAedoMrenuT
Channel Scan
Channel Skip
ENTER MENU
Scan Select Back
MENU
Select Exit
annetnAedoMrenuT
Channel Scan
Channel Skip
TV
MENU
Select Exit
Balance
Bass
Treble
Sound mode Concert
SPDIF type PCM
0
50
50
Audio

12
Press / button to select the channel you want set, and press ENTER to set.
Channel Skip
Select “Channel Skip”, press ENTER button to enter the submenu.
OSD Language
To select language of the OSD menu.
Timer Setup
Select “Timer Setup”, Press ENTER button to enter the submenu.
Caption
(See next page.)
Reset Default
Select “Reset Default”, Press ENTER button, and it will clew you “ Are you sure”, select “YES” to
default set.
Time Zone
To select time zone.
Time
Press ENTER button to enter and you can set time.
Sleep Timer
To select the sleep timer.
annetnAedoMrenuT
Channel Scan
Channel Skip
ENTER MENU
Scan Select Back
Time Zone Eastern Time
Time
Sleep Timer Off
MENU
Select Back
ENTER MENU
Set Select Back
1 Analog
2 Analog
3 Analog
4 Analog
5 Analog
6 Analog
7 Analog
8 Analog
Press the MENU on the front panel or LCD-MENU on the remote control and then use to select the
Setup menu, press or ENTER button to enter it(see the picture below).
1. Use to select what you want to adjust in the
Setup menu.
2. Press ENTER or / button to adjust(according to
the hint below).
3. When you are satisfied with your adjustment, press
LCD-MENU..
Setup menu options
ENTER MENU
Enter Select Exit
Setup
OSD Language English
Time Setup
Caption
Reset Default

- Caption Style: press to select one of Automatic and Custom, when you select automatic, the others
are disable and can not be adjusted.
- Font Size: press to select one of Medium/Large and Small.
- Font Color: press to select one of Red/Green/Blue/Yellow/Magenta/Cyan/Black and White.
- Font Opacity: press to select one of the Solid/Transparent/Translucent.
- Background Color: press to select one of the Black/White/Red/Green/Blue/Yellow/Magenta/Cyan.
- Background Opacity: press to select one of the Solid/Transparent/Translucent.
- Window Color: press to select one of the Black/White/Red/Green/Blue/Yellow/Magenta/Cyan.
- Window Opacity: press to select one of the Solid/Transparent/Translucent.
13
Caption
Select “ Caption”, press ENTER button to enter the submenu(see below).
Analog Closed Caption
Press “ENTER”, to select CC1/CC2/CC3/CC4/TEXT1/TEXT2/TEXT3/TEXT4, or select Off.
Digital Closed Caption
Press “ENTER”, to select Service1/Service2/Service3/Service4/Service5/Service6, or select Off.
Digital Caption Style
This item allows you to set the closed caption, and press ENTER button to enter Digital Caption Style
menu as below:
Analog Closed Caption Off
Digital Closed Caption Off
Digital Caption Style
Caption Style
Font Size
Font Color
Font Opacity
Background Color
Background Opacity
Window Color
Window Opacity
Custrom
Large
White
Solid
Black
Solid
Black
Transparent
MENU
Select Back
ENTER MENU
Enter Select Exit
MENU
Select Exit
Setup
OSD Language English
Time Setup
Caption
Reset Default
MENU
Select Exit
Caption
Analog Closed Caption Off
Digital Closed Caption Off
Digital Caption Style

14
Press the MENU on the front panel or LCD-MENU on the remote control and then use to select the
Parental menu, press or ENTER button to enter it(see the picture below).
Enter the code 0000 to enter the parental menu(see the
picture below), or press LCD-MENU to cancel.
Program Block(see below)
Change Password: Select “Change Password”, press
ENTER button to enter the submenu, and change the
password as you like or press MENU to cancel.
Clean parental setup: Select “Clean parental setup”,
Press ENTER button, and it will clew you “ Are you
sure”, select “YES” to default set.
Program Block
Rating Enable: Press / button to select On/Off, when you select Off, the others below are disable and
can not be adjusted.
U.S. TV Ratings: Press ENTER button to enter, and use / / / button to select, and press ENTER
button to confirm.
U.S. Movie Ratings: Press ENTER button to enter, and use / / / button to select, and press ENTER
button to confirm.
Canadian English Ratings: Press ENTER button to enter, and use / / / button to select, and press
ENTER button to confirm.
Canadian French Ratings: Press ENTER button to enter, and use / / / button to select, and press
ENTER button to confirm.
Open V-Chip(see next page)
Parental menu options
Rating Enable On
U.S. TV Ratings
U.S. Movie Ratings
Canadian English Ratings
Canadian French Ratings
Open V-Chip
MENU
Select Back ENTER MENU
Set Select Back
Program Block U.S. TV Ratings
A D L S V FV
TV-Y
TV-Y7
TV-6
TV-PG
TV-14
TV- MA
Allowed Rating Block Rating
MENU Exit
Password
Parental
MENU Exit
Parental
Program Block
Change Password
Clean parental setup

15
Open V-Chip
Select “V-Chip”, Press ENTER button to enter, you will see an item “U.S.(50 states+possessions)”, and press
ENTER button again to enter the Open V-Chip menu(see the picture below).
You can select the item you want to set, press ENTER
button to enter, and use / button to select, and
press ENTER button to confirm.
MENU Exit
Open V-Chip
Entire Audience
Dialogue
Language
Sex
Violence
Children
Fantasy Violence
MPAA

16
(page 14)
If used, this optional feature can “block” undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options
and settings that restrict or “block” the programming that can appear on the TV. Parental control allows the user the capability of defining which program
rating they consider accept-able, to the younger or more sensitive viewer. It can be preset and turned either on or off by the user who specifies the
secret 4-number code, the password. The number of hours blocked are specified. General audience and children viewer blocks should both be
programs into the TV’s memory. Viewer ratings are specified for both TV and the motion picture industry; both rating systems should be used, for
complete coverage.
The ratings are based on the ages of children.
To insure complete coverage for all TV programs, (movies and regular TV shows) choose a rating for MPAA, from the selections below. And choose
ratings from the TV Parental Guidelines Rating System below, using the Age Block option for General Audiences, and for Children. In addition
to those, you may wish to add additional restrictions from the Content Block menu. See the Parental Control menu, and submenus example below.
Overview
Determine which rating you consider acceptable to the viewer. (For example, if you choose TV-PG, all more restrictive ratings will be automatically
blocked; the viewer will not be able to see: TV-PG, TV-14, or TV-MA rated programming.)
Do you want to block the auxiliary video source entirely? (Blocks the signal sent by the equipment, such as a VCR, connected to the TV Audio/Video
input jacks) Or leave unblocked, then choose allowable ratings. Block program “Content” based on individual parameters such as: Strong Dialog,
Bad Language, Sex Scenes, Violence Scenes, or Fantasy Violence Scenes; in the Content Blk option.
Select a secret password; in the Set Password option. Use the number keys on the remote. Don’t forget the password, it is the only way you can
access the Parental Control menu and change rating selections, or turn Parental Control off.
Do you want Parental Control to be active all the time? If not, you can turn it on or off with the Lock On/Off option.
* You can set different Parental Control viewing restrictions for general audiences and for children both can be active at the same time.
* Simply specifying one content block such as Sex Scenes, will not automatically block another content in the programs from appearing.
* Even if you choose to leave the Aux inputs unblocked, the ratings you specify will automatically restrict the programming that appears
from the video sources.
* You can not disable Parental Control by disconnecting the TV from power. Block hours will automatically reset to the original block time setting
specified if power is disconnected.
Things to Consider before Setting Up Parental Control
MOTION PICTURE ASSOCIATION OF USA (MPAA) RATING SYSTEM
ssecneiduAlareneG reweivtsomotevisneffotontnetnoCG
PG Parental Guidance
Suggested
Content is such that parents may not want their children to
view the program.
PG-13 Parental Strongly
Cautioned
Program is inappropriate for preteens, with a greater degree
of offensive material Suggested than a PG rated program
RRestricted viewing Not for children under age 17.
Strong elements of sex and/or violence.
NC-17 No Children under
age 17
Not for children under age 17 under any circumstances.
Strong sexual content.
XHard Core Films Same as NC-17 rating.
No Rating No Rating MPAA Not Rated
Grade Meaning
TV PARENTAL GUIDELINE RATING SYSTEM
snerdlihCgnuoY reweivtsomotevisneffotontnetnoCY-VT
TV-Y7 Children 7 and over Considered suitable for children over 7, may contain
Fantasy Violence Scenes.
TV-G Parental Audience Considered suitable for all audiences; children
may watch unattended.
TV-PG Parental Guidance Suggested Unsuitable for younger children, may contain:
Suggestive Dialog, Bad Language, Sex, and Violence Scenes
TV-14 Parents Strongly
Cautioned
Unsuitable for children under 14, may contain: Strong
Dialog, Bad Language, Sex, and Violence Scenes.
TV-MA Mature Audience
Only
Adults only, may contain: Strong Dialog, Bad Language, Sex, and
Violence Scenes.
Grade Meaning
Note
The V-Chip will automatically block certain categories that are ‘more restrictive’.
If you block TV-Y category, then TV-Y7 will be automatically blocked.
Similarly, if you block TV-G category, then all the categories in the ‘young adult’ will be
blocked(TV-G, TV-PG, TV-14 and TV-MA).
Information
Canadian Rating:
Canadian English is used throughout all of Englishspeaking Canada (E, C, C8+, G, PG, 14+, 18+).
Canadian French is used in Quebec (E, G, 8 ans +, 13 ans +, 16 ans +, 18 ans +).
Press Enter to enter the sub-menu and then uses the 0-9 to enter the correct password : 0,0,0,0.

17
DVD Operation
DVD Operation
Press the Power button on the TV or the remote control, then press the INPUT button to select DVD mode.
If there is no disc in the DVD player the screen will show "NO DISC".
Place a disc
Insert a disc with the mirror side facing towards you. If the disc is double sided, place the title you want to
play facing you.
Do not touch the playing surface.
Hold the disc around the outside with your fingers and place the disc into the slot. The player will
automatically draw the disc into the player.
To "Eject" the disc, press the " " button on the TV or the AUTO EJECT button on the remote control.
Play
The contents of each disc vary, as to how the disc was authored and what features are included. Some
discs start playing as soon as they have been read, some need "Play" selecting in the Menu. Different play
modes are offered, such as Menu Play, Sequence Play and other modes.
Menu Play
1. Compatible with DVD,CD.
2. lf the disc is a DVD, ROOT MENU will appear on the screen.
3. When a DVD disc is loaded, press the Arrows buttons to highlight the menu item you want to choose.
4. Press ENTER or Play to start when highlighted.
5. Return to Menu when Playing: When playing a DVD disc press the Menu button to return to the "ROOT"
menu.
Title Play
1. Compatible with DVD discs.
2. During DVD playback, press Title button to display the DVD title content.
3. Press the Arrow buttons to highlight the title you want to choose, and press Enter; also you can press
numeric buttons to choose.
4. The DVD player begins with the chapter 1 of the chosen title.
Sequence Play
1. Compatible with DVD, CD, HD-CD, WMA, Digital Audio disc /JPEG discs.
2. when in stop state, press the Play button, the player will play in the "Sequence" mode.
This is for all compatible discs.
Program Play
1. Compatible with DVD, CD, HD-CD, WMA, Digital Audio disc /JPEG discs.
2. The Program Playback option allows you to enter the order in which you want chapters or tracks to play,
maximum to 16.
3. According to the highlight, use the Numeric buttons to enter the chapters / tracks in the order you want
them to play. Then press Play or use Arrow buttons to highlight the "PLAY" item and press Enter. The
chapters /tracks will play in the programmed order. You can program maximum 16 titles / chapters / tracks.