Naxa NTD-1351 User manual

MODEL NO: NTD-1351
Instruction Manual
PLEASE READ CAREFULLY BEFORE USE
USER’S MANUAL
13.3"
WITH DVD PLAYER
WIDESCREEN
HD LED TV

1
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that this product incorporates
double insulation between hazardous mains voltage
and user accessible parts.
When servicing use only identical replacement parts.
This symbol indicates important
instructions accompanying the
product.
WARNING
To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
The apparatus must not be exposed to dripping or splashing. Objects filled with
liquids, such as vases or drinking glasses, must never be placed on the
apparatus.
This symbol indicates "dangerous
voltage" inside the product that
presents a risk of electric shock
or personal injury.
Caution: To reduce the risk of electric shock, do not remove cover (or back). No
user serviceable parts inside. Refer servicing to qualified service personnel.
Important Safety Precautions
2
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15. If an outside antenna or cable system is connected to the product, be sure the
antenna or cable system is grounded so as to provide some protection
against voltage surges and built-up static charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70-1984 (Section 54 of Canadian Electrical
Code, Part 1) provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an antenna-
discharge unit, size of grounding conductors, location of antenna-discharge
unit, connection to grounding electrode. See following example.
16. Mains plug is used as the disconnect device. It shall remain readily operable
and should not be obstructed during intended use.
This apparatus shall be connected to a mains socket outlet with a protective
earthing connection.
ELECTRIC
SERVICE
EQUIPMENT
NEC-NATIONAL ELECTRICALCODE
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250 PART H)
GROUND CLAMPS
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ANTENNA
DISCHARGE UNINT
(NEC SECTION 810-21)
ANTENNA
LEAD IN
WIRE
Important Safety Precautions

3
Welcome you to high quality image world color LED TV brings you. We
sincerely hope TV brings you the brand new visual and audio enjoyment.
This operating instructions can help you operate this TV set easily.
Read this manual before operating the unit for being familiar with its features and keep it for
future reference.
Introduction
Features
Specifications
General Description
Overview of front and side panel
Overview of back panel
Overview of remote control
Installing batteries in the remote control
External Connection
Antenna connection
Connecting VCR
Connecting DVD Player/Set-Top Box
Connecting DVD Player/Set-Top Box via HDMI
Connecting a headphone
Connecting Digital Audio system
Supporting signals
Turning the TV On and Off
Menu operation
Menu system introduction
5
6
7
7
9
12
12
13
14
15
15
16
17
18
19
19
20
21
Welcome you to purchase LED TV
Table of Contents
4
Table of Contents
Troubleshooting
22
27
17
8
26
12
Accessories
5
5
25
Supporting DVD Format
Connecting Amplifier/DVD Home Theater
Connecting PC
16
17
Picture
Source
Setnp
Channel
USB
USB Operation
23
24

5
Input terminals used for external equipment connection
One ANTENNA jack
One computer VGA/PC input
One COMPONENT inputs
One AV inputs
One VGA/PC AUDIO input
One PHONE output
One HDMI inputs
One USB input
5
Introduction
6
Note:
1. Due to TV may be used with different display screen, weight marked in this
user's manual or in packaging box are subject to change without notice.
2. In case of any design change, a notice will not be released.
Introduction
W arnings
Specifications
Features
Quick setup Guide
Qui ck setu p Guide
Warranty Card
War rant y Card
Manual
Instructions
This product can play the following DVD formats disc.
Supporting DVD Format
Adapter requirement In put
Out put
AC~100-240V 50/60Hz
DC 12V 3A
E
13.3"
350mmx116mmx280mm
1366X768
NTSC/ATSC
24W
Hative resolution
Sound output
≤1 W
O O
0 C-40 C

78
General Description
Overview of back panel
11
11 PHONE OUT
Please access to audio by earphone.
General Description
Overview of front and side panel
SPEAKER
REMOTE CONTROL SENSOR
Aim the remote control towards this
spot on the TV.
POWER INDICATOR
Green: In power on mode.
Red: In standby mode.
Toggles between all the available input
sources ( TV,AV, S-VIDEO,YPBPR,
VGA,HDMI, DVD)
Press to see an on-screen menu of your
TV's features.
CH+/-
Press to change channels.
In the on-screen menu, use the CH +/-
buttons as up/down arrow buttons.
VOL+/-
Press to increase or decrease the volume.
In the on-screen menu, use the VOL +/-
buttons as left/right arrow buttons.
button
Press button to toggle between
and standby mode.normal
9
10
10
SOUREC
MENU
SOURCE 9)HDMI
Connect to the HDMI jack of a device
with an HDMI output.
VGA/PC IN
Connect to the video output jack on
your PC.
HEADPHONE
COMPONENT
Connect Component video.
COMPOSITE VIDEO
Video input for external devices, such
as a camcorder or VCR.
COMPOSITE COMPONENT AUDIO
Audio inputs for external devices.
AUDIO OUT
Connect to the audio output jacks
on your amplifier/home theater.
COAXIAL
Connect to a Digital Audio devices.
ANT
Connect to an antenna or cable TV
system.
10 DC12V IN
Connect the supplied power
10
Connect to a set of headphone for
private listning
11
11
USB input
POWER
MENU
SOURCE VOL+VOL-
CH+CH- PLAY EJECT

9
Overview of remote control
General Description
1.
2.
Number key(0-9):
3.
4. -/--:
RETURN:
5.
PROG +/-:
9.
7. S.MODE:
P.MODE:
6.
8.
10.
11. ARROW BUTTONS(
ENTER:
12.
13.
14.
15.
INFO: Displays the channel information
16.
18.
17.
19. LOCK: Press to display the parental menu.
20. Time: Press to display Time menu.
21.CC: press to display the closed caption
22. FREEZE: Press to freeze the screen.
23. FAV: Selects faorite channels.
24. LIST: Press to display the TV program list.
25. FAV +/-: press this button +/-the favorite program list.
26. ADD:
ERASE:
Add this program to the list .
Delete this program from the favorite
favorite channels
channels list .
27. SLEEP: Sets the sleep timer press the repeatedly
to select sleep time among off, 5, 10, 15, 30, 45,
60, 90, 120, 180, 240.
123
46
5
78
0
-/--
VOL PROG
PMODE.S MODE
.
EXIT MENU
POWER MUTE
ENTER
INFO EPG ZOOM MTS
9
SOURCE
RETURN
DISPLAY SETUP AUDIO
TITLE
MENU
LOCK
TIME FREEZE CC
REPEAT
A-B
LIST
FAV ADD/ERASE
FAV +/-
GOTO
SUBTITLE
PBC
12
45
6
8
7
9
3
10
11
12
13 14
15 18
17
16
19
20
22
21
23
24
26
25
27
NTD-1351
10
Overview of remote control
General Description
DVD Mode :
When in DVD mode, use the arrows in the
bottom section of the remote to operate the
menus etc.
EJECT BUTTON( )
Press the EJECT button whenthe power is on the
disc will eject. Put the disc in the slot slightly, with
the data side facing towards you. Press EJECT
button again the disc is pulled in automatically,
and the unit starts playing automatically (Without
auto play function for JPEG discs).
MENU PBC BUTTON
Press menu button and the screen will display
“Root Menu”, select item according to your
preference. (This button is valid to DVD disc
possessing multilayer Menu). PBC button lets you
play Video CDs,interactiv-ely. If PBC is on, you
can use the number buttons to select tracks in
the menu. If PBC is off, you can select the tracks
directly.
AUDIO BUTTON
When play DVD, by pressing this button, you can
change the audio language from the one selected
at the initial settings to a different language,
available.
REPEAT BUTTON(REP)
Press the REPEAT button one time, it repeats the
chapter. Press it again and it repeats all chapters
of the disc. Press REPEAT button one more time
and the repeat function cancels.
A-B REPEAT BUTTON(REPA-B)
Press the A-B button once to set point A Press .
the A-B button a second time to set point B. After
setting the program repeat playing from A to B.
Pressing the A-B button a third time will cancel
the repeat.
TITLE BUTTON
Press TITLE button, there will have an
screen indication “TITLE”.
Press the direction or numeric buttons to select
your favourite title. Will play from the first chapter
of the selected title.(for DVD disc only)
ENTER: Validation key. (bottom section of ENTER
button for DVD function only)
ARROW BUTTONS ( / / / ):Use to move
cursor up/down/left/right. (direction buttons of
bottom section for DVD function only)
SUBTITLE: This function may enable you to
select multi subtitle languages (as many as 32
kinds only for the discs with multi subtitles
encoded). Press the SUBTITLE button to get
desired display.
DISPLAY: Press display buttom to show the the
information of the DVD player.
GO TO BUTTON
Press this button to go to desired position . The
player provides 3 search mode.
[
[
[DVD only]
TITLE XX/XX CHAPTER [ ]/XXX
[DVD only]
TRACK GOTO T:X
CD]
DISC GOTO
[DVD only]
CHAPTER XX/XX TIME
On the remote control, the bottom section
ARROW BUTTONS ( / / / ):Up and down
buttons of the OSD menu, to change the OSD
menu items; Left and right buttons of the OSD
menu, to select the OSD menu items. (only for
DVD function)
When the above items are showed on LED
screen, you can input numbers to locate desired
sector.
The number you input is invalid if it is beyond the
track’s capacity.
CD]
E

12
SLEEP
P.MODE S.MODE LIST
1 2 3
SOURCE
+-./ ABC DEF
DTV
Installing Batteries in the Remote Control
Point the remote towards the remote
control sensor of the wireless TV and
use it within 7 meters.
Put the used batteries into the recyc-
ling bin since it can negatively affect
the environment.
Universal Remote Control operation please refer to Appendix 2.
General Description
Antenna connection
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be
connected to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder
cable, you need to use the 300ohm/75ohm converter to connect the antenna cable to the
antenna jack. For details Please refer to the following drawing.
Use a 75ohm - 300ohm converter
300ohm coaxial cable
Antenna feeder
ANT IN
75ohm coaxial cable
Antenna cable
Antennas with 300 W flat twins Leads Antennas with 75 W Round Leads
External Connection
Installing BatteriesInstalling Batteries
1Open the battery compartment
cover on the back side.
2Insert two 1.5V AAA size batteries in
correct polarity. Don´t mix old or used
batteries with new ones.
3Closed the cover.
Battery
Cover
2xsize AAA 1.5V
Battery
Cover
The batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
11
Overview of remote control
General Description
PLAY AND PAUSE BUTTON( )
Press this button to start playback. Press this
button again to pause playback.
STOP BUTTON( )
Press button once to stop. Press button to resume
from where you stopped.
Press button Twice to stop. Press button to start
from beginning. In order to protect the disc, press
button then press EJECT button to take the disc
out. When the disc is ejected, hold the disc edge
to prevent scratches.
When not using the DVD function (in standby
mode or using others modes for a long time),
please take out the disc to protect the DVD loader
and the disc.
PREV/NEXT BUTTON( /)
When playing a DVD disc, press PREV to play the
previous chapter. when playing a SVCD, VCD,
CD disc, press PREV to play the previous track.
When playing a DVD disc, press NEXT to play,
the next chapter. when playing a SVCD, CD disc,
press NEXT to PLAY the next track.
FR/FF BUTTON( /)
To Use Fast Forward or Fast Reverse:
1. When playing a DVD, press FF buuton to fast
forward through the disc. Press FR button to
fast reverse through the disc.
2. Press PLAY button to resume normal playback.
SETUP BUTTON
Press this button to get the setup menu . you can
select the setting as you like .

13 14
External Connection
Connecting VCR
External Connection
Connecting DVD Player/Set-Top Box
These instructions assume that you have already connected your TV to an antenna or a
cable TV system. Skip step 1 if you have not yet connected to an antenna or a cable
system.
5
VCR Rear Panel
4
3
Audio Cable (Not supplied)
Video Cable (Not supplied)
RF Cable (Not supplied)
Follow the instructions in Viewing a VCR or Camcorder Tape to view your VCR tape.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
We recommend the use of cables with a Ferrite Core.
1. Unplug the cable or antenna from the back of the TV.
2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR.
3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN
terminal on the TV.
4. Connect a Video Cable between the VIDEO OUT jack on the VCR and the VIDEO IN
jack on the TV.
5. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AUDIO L and
AUDIO R jacks on the TV.
If you have a mono (non-stereo) VCR, use a Y-connector (not supplied) to hook up to
the right and left audio input jacks of the TV. If your VCR is stereo, you must connect
two cables.
TV Rear Panel
and the AUDIO OUT jacks on the DVD player.
the TV and the COMPONENT [Y, PB, PR] jacks on the DVD player.
The rear panel jacks on your TV make it easy to connect a DVD to your TV.
Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr
(Red) for enhanced video quality.
Be sure to match the component video and audio connections.
For example, if connecting the video cable to COMPONENT IN, connect the audio
cable to COMPONENT IN also.
Each DVD player/STB has a different back panel configuration.
When connecting a DVD player/STB, match the color of the connection terminal to the
cable.
We recommend the use of cables with a Ferrite Core.
1. Connect a Component Cable between the COMPONENT IN [Y, PB, PR] jacks on
2. Connect Audio Cables between the COMPONENT IN [R-AUDIO-L] jacks on the TV
TV Rear Panel
Audio Cable (Not supplied)
2
Component Cable (Not supplied)
1
DVD Player/Set-Top Box

15
16
External Connection
Connecting DVD Player/Set-Top Box via HDMI
This connection can only be made if there is a HDMI Output connector on the external
device.
What is HDMI?
HDMI, or high-definition multimedia interface, is a next-generation interface that enables
the transmission of digital audio and video signals using a single cable without
compression.
Multimedia interface is a more accurate name for it especially because it allows multiple
channels of digital audio (5.1 channels).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the
HDCP(High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi-channel digital audio.
Each DVD player/STB has a different back panel configuration.
We recommend the use of cables with a Ferrite Core.
1. Connect an HDMI Cable between the HDMI connector on the TV and the
HDMI connector on the DVD player/Set-Top Box.
TV Rear Panel
HDMI Cable (Not supplied)
DVD Player/Set-Top Box
Connecting Amplifier/DVD Home Theater
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the
cable.
We recommend the use of cables with a Ferrite Core.
1. Connect Audio Cables between the AUDIO L and R OUT on the TV and AUDIO IN [R-
AUDIO-L]on the Amplifier/DVD Home Theater.
When an audio amplifier is connected to the AV OUT [R-AUDIO-L] terminals: Decrease
the gain (volume) of the TV, and adjust the volume level with the Amplifier's volume control.
TV Rear Panel
Audio Cable (Not supplied)
Amplifier/DVD Home Theater
Connecting Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
5.1 CH audio is possible when the TV is connected to an external device supporting 5.1
CH.
We recommend the use of cables with a Ferrite Core.
1. Connect an COAXIAL Cable between the SPDIF jacks on the TV and the Digital Audio
jacks on the Digital Audio System. When a Digital Audio System is connected to the Input
SPDIF terminal: Decrease the gain (volume) of the TV, and adjust the volume level with
the system's volume control.
TV Rear Panel
COAXIAL Cable (Not supplied)
Digital Audio System
External Connection

Turning the TV On and Off
1. Insert the power cord plug into a polarized AC
outlet.
2. Press POWER button on the remote control or
button on the LED TV.
3. Normal picture will be displayed on the screen after
6 seconds. If no signal input, "No Signal" will be
displayed on the screen.
4. If temporary POWER off is required, press POWER button on the remote control or
button on the LED TV.
5. If you want to completely switch off the power for this unit, unplug the power cord plug
for this unit.
6. After switching off the unit, you should turn on the TV again at least 5 seconds later.
Status indication lamp
Green: In power on mode.
Red: In standby mode.
Auto power-off
If there is no signal input in any Mode, the TV will automatically accesses the standby
state in about 15 minutes.
Memory before turning TV off
The settings of picture and the preset channels will be memorized at turning off the unit.
When being started up again, the unit will work according to the mode set before being
turned off.
1How to turn the TV on or off
17 18
Basic Operation
Input Mode
Air
Cable
8VSB
Free 64/256QAM
CVBS NTSC 3.58
Supporting signals
Component
VGA/PC
480p/60Hz
720p/60Hz
1080i/60Hz
HDMI
640x480/60Hz
800x600/60Hz
1024x768/60Hz
480p/60Hz
720p/60Hz
1080i/60Hz
1360x768/60Hz 1080p/60Hz 1080p/60Hz
Connecting PC
Each PC has a different back panel configuration.
The HDMI jacks do not support PC connection.
We recommend the use of cables with a Ferrite Core.
1. Connect a D-Sub Cable between RGB/PC IN connector on the TV and the PC output
connector on your computer.
TV Rear Panel
D-Sub Cable (Not supplied)
PC
1
2.Plug PHONE out connector into PHONE out jack on the TV the TV speaker will
be muted.
2 Phone Out
External Connection
Press SOURCE button to display the input source
list;
Press ▼/▲ button to select the input source you
want to watch;
Press ENTER or ▶ button to enter the input
source;
Adjust the OSD Screen
BASIC OPERATION
Press MENU button to display
the MAIN OSD MENU.
Press button to select
the MENU you want.
Press button to enter the
sub menu.
You can use MENU or EXIT
button to save and return back
to the previous menu.
Press button to select
the option and then press
to adjust the value in
the value in the sub menu.
◀/▶
▼/▲
▼/▲
◀/▶
INPUT SOURCE
TV
AV
HDMI
VGA
Componnet
DVD
USB

19 20
Menu system instruction
Menu system instruction
Adjust the OSD Screen
PICTURE
The PICTURE menu offers options to enhance and refine the picture displayed
on your TV based on ambient room light and personal prefer-ences.
Adjustment options include PICTURE MODE,CONTRAST,B RIGHTNESS,
COLOR, TINT,SHARPNESS, COLOR MODE
How to Navigate:
Press the MENU button on the remote control. then press◀/▶ buttons to
select PICTURE. Press the down ▼ button to highlight PICTURE MODE,
then press the ◀/▶ button to select your viewing preference from 4 factory
options: Custom > Soft > Vivid > Standard.
The Standard setting is recommended for most viewing environments. Depending
on the ambient light level in the room, you may select one of the other options
more pleasing. To make more critical adjustments based on your own preferences
in Custom :
Press ▼ button to highlight Constrast/brigthness/Color/Tint/Sharpness. then
press◀/▶ buttons to increase or decrease the option.
button to highlight Constrast/ Brigthness/ Color/ Tint/ Sharpness. then press
Press ▼ button to highlight Advanced Video. then press the ◀/▶ button to select
Color Temp, Aspect Ratio, Noise Reduction, Adaptive Contrast, Auto Zoom,
Color Range.
Press ▼ / ▲ button to select the option and then press ◄ / ► to adjust the value
in the sub menu;
NOTE:
Contrast: This item can adjust the highlight intensity of the picture, but the shadow
of the picture is invariable.
Brightness: This item can adjust the optical fiber output of the entire picture, it
will effect the dark region of the picture.
Color: This item can adjust the saturation of the color based on your own like.
Tint: This item may use in compensating color changed with the transmission in the
NTSC code.
Sharpness: This item can adjust the peaking in the detail of the picture.
Adjust the OSD Screen
The Sound menu offers options to make sound enhancements while listening
through the built-in speakers
How to Navigate:
Press the MENU button on the
remote control. then press ◀/▶
buttons to select Sound. Press
the▼ button to highlight
Sound Mode, then press the
◀/▶ button to select your sound
preference from 6 factory
options: Standard> News >
Music > Movie > Sport >
Custom.
SOUND

21 22
Menu system instruction Menu system instruction
Adjust the OSD Screen
To make more critical sound adjustments based on your own preferences in Custom :
Press▼ button to highlight Bsaa/ Treble/ Balance. then press the
increase or decrease the option.
Press▼ button to highlight Surrond, the press the ◄ / ► buttons to select it ON or OFF.
Press▼ button to highlight AVC. then press the◄ /► buttons to select it ON or OFF.
Press▼ button to highlight Audio Language. then press the◄ /► buttons to select the
language you want. This is only available in digital TV.
NOTE:
Balance: This item can adjust the speaker’s output, it enables you to listen to
best at your position.
Surround: The choice of this item can suit the big space or the encirclement sound
effect pattern,
according toreceiveing the broadcast signal or the external input source.
AVC: This item uses for reducing the difference between channel and program’s
volume automatically.
it made the overall water to be even. This function will also reduce the fluctuation
of the sound.
◄ / ► buttons to
SETUP
In the Setup menu you may change some preferences that include Sleep Time,
Time Zone and so on.
How to Navigate:
Press the MENU button on the remote control. Navigate using ◄ /► buttons to
select Setup. Gain access to display op tionsb y press ing down▼arrow butt on to
highlight Parental Controls or other options, then press◄ / ► buttons on your
remote to select.
Adjust the OSD Screen
Press▼ button to highlight Parental Controls. then press the buttons to
select Enter Password.
Press▼ button to highlight Time. then press the◄ /► buttons to select Sleep Time,
Time, Zone, DST, clock.
Press▼ button to highlight Closed Caption. then press ◄ / ► buttons to enter sub-menu.
Press▼ button to highlight Menu Settings. then press ◄ / ► to adjust the value in
the sub menu;
Press▼ button to highlight VGA Settings. This is only available in PC source.
Press▼ button to highlight Restore Default. then press the ► buttons to reset .
NOTE:
Enter Password: factory default code is “9999”
Sleep Time : This item can close doen the TV automatically.
Time Zone : This item can select the area.
Clock : This item will change with the area which you have selected in Time Zone.
This is only vailable in PC source.
Restore Default: lt will replace the picture establishment for default value.
◄ / ►
CHANNEL
How to Navigate:
Press the MENU button on the remote control. Navigate using buttons to select
Channel.
◄ / ►
Press ▼ / ▲ button to select Air/Cable, then press ◄ / ► button to select Air or Cable.
Press ▼ / ▲ button to select Auto Scan, then press ENTER or ► button to enter sub menu.
Press ▼ / ▲ button to select Favorite, then press ENTER or ► button to enter sub menu.
Press ▼ / ▲ button to select Show/Hide, then press ENTER or ► button to enter sub menu.
Press ▼ / ▲ button to select Channel No., then press ◄ / ► button to select what you
want watch.
Press ▼ / ▲ button to select Channel Label, then press ENTER or ► button to enter sub menu.
You can input alphabet or the digital number to change the name of the channel.

23 24
USB
USB Operation
Note: Before operating Media menu, Plug in USB device, then press SOURCE
button to set the Input Source to USB.
Press button to select Photo/Music , and then press ENTER button to enter.◄ / ►
Playing Photo
It is available to playback the JPEG photo files from the USB device.
Press ▼ / ▲ button to select the photo you want to watch, and then press ENTER
button to play.
Press ▼ / ▲ button to play previous or next photo.
Press button to rotate the photo.◄ / ►
USB
USB Operation
Playing Music
It is available to playback the music files in the formats MP3 from the
USB device.
Press ▼ / ▲ button to select the music you want to listen, and then press ENTER
button to play.
Press button to select menu in the botton you want to run, and then press
ENTER bitton to operate.
Press exit button to back to the previons menu.
◄ / ►

25 26
2. OSD Lang : Set the OSD language options.
4. LAST MEMORY:Save the last set to open with
the related options are: On/ Off.
If this function is enabled, it allows you to continue
the playback of a film (DVD) even after switching
off or remove of a disk. The player stores all
settings like play position or used language and
continues playback with these settings after the
disk is reinserted.
This function will be enabled or disabled via the
setup-menu of the DVD-player.
Audio Setup Page
DVD Setup Menu
Interface Function
Press the DVD Setup button to activate the DVD
player OSD menu, the DVD setting menu by the
romote control the bottom section arrow buttons
and ENTER button. press the Left/Right arrow buttons
to move between the different sub-menus; press
the Up/Down arrow buttons to highlight the
prefered option, confirm with the button. Press ENTER
the DVD setup button to exit the OSD menu.
General Settings page
1. TV DISPLAY: Set the ratio of output to the
television signal options are:
Preference Page
1. TV Type: This product supports output of
various system, including AUTO, NTSC, PAL.
PAL: Choose this settings if your DVD player
is connected to a PAL TV. The default setting
is PAL; NTSC: Choose this settings if your
DVD player is conn -ected to a NTSC TV.
AUTO: Choose this settings if your DVD player
is connected to a multi-system TV.
For more information of output format, refer to
the instruction of your DVD player.
2. Audio: DVD built-in disc dubbing language
selection options.
3. Subtitle: This player provides English etc.
languages as the built-in subtitle language,
when playing DVD, user may hide the subtitle
or choose any of them as the present subtitle
language.
4. Disc menu: DVD Disc language selection
options.
Normal/PS(4:3 Pan Scan),Nomal/PS
(4:3 Leiter Box),Wide,The current
default settings is wide.
3. CAPTIONS :Play the enclosed captions on
some DVD titles,Optional settings:ON/OFF.
1.LT/RT: Logic Surround stereo
audio output. This matrix-based coding
process enables stereo audio tracks to
carry four channels (left,center,right and
surround) of audio data.
2.Stereo: Analog stereo audio output .The
player sends the subwoofer and speech
signals to your front right and front left
speakers.
5. Default: This option will resume the original
settings of this player.
Interface Function

27 28
8
Troubleshooting
MUTE
E
E
E
E
E

29
Picture defects and the reason