Naxa NT-4002 User manual
39.5” CLASS WIDESCREEN FHD TV
MODEL NO.: NT-4002
FCC Notice
Support
NAXA
9 Safety Information
Warning
CAUTION!
*'J � RISQUE DE CHOC ELEC TRIOUE/NE PAS OUVRIR
Important Safety Instructions
Safety
I
--�o
Safety
x
/
x
I
U
5
15
15
6
6
6
7
8
9
6 4
9 20
3 4
5
6
21
22
Connecting PC
Connecting a Headphone 13
14
TV uses a TFT LED display screen
FHDTV Compatible (480i, 480p, 576i, 576p, 720p, 1080i, 1080p)
Supports American TV Standards 8VSB/Free 64/256QAM,NTSC System, ATSC System
Connect directly to computer to achieve a TV/monitor.
Zero X radiation complies with green environment protection requirement
Advanced Chroma Processing
Closed captioning/Program Control
SAP/STEREO/MONO; ATSC.
HDMI input
USB input
Input terminals used for external equipment connection
35.7 8.15 22.3 inch
NT-4002
60 W
AC 100-240V~50/60Hz
1920 1080
12.2 lbs
Remote control sensor / Power indicator
VOL +/-
Press to increase/decrease the volume.
In the on-screen menu, use them to move left/right.
CH +/-
Press to change channels.
In the on-screen menu, use them to move up/down.
MENU
Press to see an on-screen menu of your TV.
SOURCE
Toggles between all the available input sources
STANDBY
Press STANDBY button to toggle between normal and standby mode.
1.
2.
3.
4.
5.
6.
28WOverview of front and back panel
2
3
4
5
6
1
TV reception
CO AX
OU T
Pb P r
IN
IN
L R
AC 100-240V~
50/60Hz
1 3 4 52 6 7
O UT
10
9
8
7
11
++
0
MUTE
LOCK
INFO MTS
SLEEP ADD/ERASE
CC
TIME
FREEZE
LIST
EPG
FAV +/-
ENTER
EXIT
RETURN
VOL CH
MENU
SOURCE
S.MODE
P.MODE
-/--
ZOOM
STANDBY
FAFAFAVVV
18
19
15
1 2
16
20
22 23
24
25
27
3
4
5
6
7
8
9
10
11
12
13
14
17
21
26
1. STAND
BY:
Turn the TV on/off.
2. MUTE: Press to mute the sound.
3. SLEEP: Set the sleep timer.
4. FAV :Select favorite channels.
5. FAV +/-: Press to watch next / previous favorite program.
6. ADD: Add this program to the favorite channels list.
ERASE: Delete this program from the favorite channels list.
7. LOCK: Press to display the Lock menu.
8. Time: Press to display current time.
9. LIST: Press to display the TV program list.
10. FREEZE: Press tofreeze the screen.
11. EPG: Press to display the EPG menu.
12. INFO: Display channel information.
13. CC: Press to display the closed caption.
14. M
T
S: Press to select the audio channels.
15. MENU: TV system setup.
16. SOURCE: Press to change input source.
17. ARROW buttons: Use to move cursor up/down/left/right.
18. ENTER: Validation key.
19. EXIT: Press to exit menu.
20. ZOOM: Press to change the screen scale.
21.
S.MODE:
Press to cycle through the different
sound settings.
22. VOL +/-: Press to increase/decrease the sound level.
23. CH+/-: Press to scan through channels.
24. P.MODE: Press repeatedly to cycle through the
available video picture modes.
25. Number key (0-9): Press 0-9 to select a TV channel
directly when you are watching TV. The channel changes
after several seconds
26. -/--:
Press this button to enter a program number for
multiple program channel such as 2-1, etc
27. RETURN:
Return to the previous channel viewed.
CO AX
OU T
CVBS/Y Pb Pr
IN
IN
L R
AC 100 -240V~
50/60Hz O UT
General Description
Installing Batteries in the Romote Control
Antenna connection
Use a 75ohm - 300ohm converter
300ohm coaxial cable
Antenna feeder
ANT IN
75ohm coaxial cable
Antenna cable
Batteries should last for 1 year under normal use.
If you do not intend to use the remote control for a long period of time, remove
the batteries to prevent damage due to leakage.
Do not use old and new batteries together.
The batteries or battery pack shall not be exposed to excessive heat such as
direct sunlight, fire, or other heat sources.
Installing Batteries
1Open the battery compartment
cover on the back side.
2Insert two AAA batteries inside the battery
compartment with their + and – ends
aligned as indicated. Do not mix old and
new batteries or different types of
batteries.
3 Close the cover.
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be
connected to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder
cable, you need to use the 300ohm/75ohm converter to connect the antenna cable to the
antenna jack. For details Please refer to the following drawing.
Antennas with 300ohm flattwins Leads Antennas with 75ohm Round Leads
External Connection
5.1 CH audio is possible when the TV is connected to an external device supporting 5.1 CH.
We recommend the use of cables with a Ferrite Core.
1. Connect a coxial cable between the SPDIF jack on the TV and the digital audio input jacks
on the digital audio system. When a digital audio system is connected to the SPDIFterminal:
Decrease the gain (volume) of the TV, and adjust the volume level with the system’s
volume control.
COAX
OUT
CVBS/Y Pb Pr
IN
IN
L R
AC 1 00-240V~
50/60Hz O UT
COAX
OUT
CVBS/Y Pb Pr
IN
IN
L R
AC 1 00-240V~
50/60Hz O UT
COAX
OUT
CVBS/Y Pb Pr
IN
IN
L R
AC 100 -240V~
50/60Hz O UT
COAX
OUT
CVBS/Y Pb Pr
IN
IN
L R
AC 1 00-240V~
50/60Hz O UT
Each PC hasa different backpanel configuration.
The HDMI jacksdo not supportPC connection.
We recommend theuse of cables with a Ferrite Core.
1. Connect aD-Sub Cable betweenRGB/PC IN connector on the TVand the PCoutput
connector on yourcomputer.
2. Connect thePC audio inputjack on the TV.
Plug headphone connectorinto headphone jackon the TV. Then theTV speaker will
be muted.
CO AX
OU T
CVBS/Y Pb Pr
IN
IN
L R
AC 1 00 - 240V~
50/6 0Hz OUTCOAX
OUT
CVBS/Y Pb Pr
IN
IN
L R
AC 1 00 -240V~
50/6 0Hz
(Not supplied)
OUT
Input Source
TV
AV
Component
HDMI 1
HDMI 2
HDMI 3
VGA
480i, 480p, 720p, 1080i, 1080p
480i, 480p, 720p, 1080i, 1080p
USB
1. Insert the power cord plug into a polarized AC outlet.
2. Press button on remote control or STAND BY button on the LED TV.
3. Normal picture will be displayed on the screen after 6 seconds. If no signal input,
"No Signal" will be displayed on the screen.
4. If temporary POWER off is required, press button on remote control or
STANDBY button on the LED TV.
5. If you want to completely switch off the power for this unit, unplug the power cord
from the electrical outlet.
6. After switching off the unit, do not turn on the TV again for at least 5 seconds.
Status indication lamp
No light: In power on mode.
Red: In standby mode.
Auto power off
If there is no signal input in TV mode, the TV will automatically access the standby state
in approximately 10 minutes.
Memory before turning TV off
The settings of picture and the preset channels will be memorized after turning off the
unit. After restarting, the unit will work according to the mode set before being turned off.
How to turn the TV on or off
17 18
.
19 20
5. Advanced
This only adjustable for PC/VGA input signal.
6.
7
9.
10.
Audio Receiver : Turn on/off the audio receiver.
Device Lists : Press Enter to display available devices.
Connect : Turn on/off the audio receiver.
Root Menu : Press Enter button into the root menu.
CEC Control
Device Auto Power Off : Turn on/off the device auto power off.
TV Auto Power On : If this function is enabled, the TV will power on autimatically
after turningon an externally connected CEC device.
.
21 22
7. Hotel Menu
-Press RIGHT navigation button orENTER
button to enterit.
Hotel Mode: turn on/off Hotel Mode.
Boot Setting: set Picture Mode, Default
Volume, MaxVolume, BootSource.
(Boot Channel &Channel Select won’twork if noTV signals.)
Hotel Lock: turn on/off Tuner Lock, Keypad Lock or Menu Lock.
Power Save: select desired Power Save time.
TV to USB:export data toUSB device.
USB to TV: import data fromUSB device.
Reset Hotel Setting:reset above hotelsetting.
23 24
• Insert a USB memory device, which contains Photo or Music files, into USB slot.
• Press SOURCE button on the remote control to switch this unit to USB (or Media) mode.
•Press LEFT/RIGHT navigational button to choose between the Photo or Music page.
Photo Playback
- Select Phototab on the USB page.
- Press UP/DOWN navigation button to select preferred folder/file and press
the ENTER button to enter a folder or play selected file.
•Press UP/DOWN navigational button to select and press the OK button to open the file.
Durning playback
-Press UP/DOWN navigation button to play previous/next photo.
-Press LEFT/RIGHT navigation button to rotate a photo counterclockwise/
clockwise.
-Press EXIT button to return to Photo menu page.
Durning Playback
-Press INFO button to display/hide the tool bar.
Music Playback
-Select the MUSIC tab on the USB page.
-Press UP/DOWN navigation button to select preferred folder/file and press the
ENTER button to enter a folder or play selected file.
-Press LEFT/RIGHT navigation button to select preferred option and
press ENTER button to confirm it.
26
25
If you have any problem, review the solutions for each symptom listed below. The following
symptoms may have been caused by inappropriate adjustment rather than actual
malfunction of the unit. If the trouble persists, contact the Customer Care Center, see back
page for contact details.
Please check antenna connection. Station may be
experiencing problems, please tune to another station.
Please adjust the contrast and brightness settings.
Please check the power cord is plugged in and that
the power outlet works.Unplug the power cord plug it in
after 60 seconds and restart the TV.
Table of contents
Other Naxa TV manuals
