How to Use
Step 1: Plug-in the USB
Nano receiver inside the
USB port of Smart TV or Joy
Box. The system will
automatically install the
driver software
Step 2: Control the remote
mouse cursor on the
device by moving it in the
air. The movement of the
remote mouse controls the
direction of the pointer.
Note: You can turn the mouse
pointer off by pressing the
"CURSOR LOCK" button.
Press it again to turn the
mouse pointer on.
Auto Sleep and Low Power
After 20 seconds, the remote
will go into standby mode. To
use the device, press any key.
Blinking green light (without
any key pressed) indicates
low power of the remote
mouse. You can recharge it
with micro USB Cable.
Bluetooth/Infrared mode
The remote mouse’s default
mode is Bluetooth. Short press
the "OK" + "MENU" button on the
remote mouse to switch to
Infrared mode. Press it again to
switch to Bluetooth mode.
Note: Infrared mode can be
used to replace the buttons of
TV Remote with Remote Mouse
buttons.
Bluetooth Mode: Green Light
Infrared Mode: Red Light
V1.0
REMOTE MOUSE
Air Mouse IR Remote Keyboard
REMOTE MOUSE
OK
VOL+
OK/
MOUSE_L CLICK
MENU
BROWSER
Email
CURSOR LOCK
POWER
VOL-
ARROW KEY
Back/
MOUSE_R CLICK
HOME
MUTE
