NDI PL 104GG User manual

IMPORTANT :
being scratched.
Do not tighten screws/bolts until the unit is completely assembled.
Check to be sure that you have all parts and hardware.
Keep all hardware parts out of reach of children.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
PL 104GG,PL 121GG
DESK SHELL
Insert the cam with the arrow
pointing towards the hole in
the edge.
KLIX CAM INSTRUCTIONS
Line up Cam Lock,
turn clockwise.
1 2
Insert the Cam Lock into
Klix Cam. Turn Klix Cam to
lock.
3
Back PanelTop Panel
A B
Right Side Panel
Left Side Panel
C D
Screw
#6 x 58"
30 Pcs
Housing
Cap (Long)
4 Pcs
1 2
Housing
Cap (Short)
6 Pcs
3 4
Adjustable
Glide
4 Pcs
5
6 Hole
L-Bracket
5 Pcs
6 7
Please follow these instructions for easy assembly.
Cam Lock
10 Pcs
Klix Cam
10 Pcs
M4 x 65
Allen-Key
1 Pc
8
PAGE 1 OF 2

Turn Top Panel (A) upside down and insert Cam Lock
pins (1) into top panel and into side panels (C,D).
Insert Klix Cams (2) in Side Panels (C,D) and back
panel (B). Attach Back Panel (B) to side panels (C,D)
and Top Panel (A). Turn Klix Cam to tighten.
X
2
X
XD
6
7
1
C
B
TOP
4
Attach Housing Cap(3) & (4) to
each Klix Cam(2) by pushing
the neck thought the center of
the Klix Cam.
Attach those
Back Panel(B)
and left right
Side
Panel(C,D) to
Top Panel as
same as Box 1.
Attach L-Bracket(6) to Top
Panel(A), Back Panel(B) and
Side Panel(C,D) as shown by
tighten Screws(7) securely.
A
X
B
XC
X
3&4
Screw Adjustable Glides(5)
into bottom of Side Panel.
D
35
DESK SHELL
PL 104GG,PL121GG
PAGE 1 OF 2