NDI PLUS PL 107-A1 User manual

Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Keep all hardware parts out of reach of children.
IMPORTANT !!
being scratched.
Do not tighten any screws or bolts until the unit is completely assembled.
Check that you have all parts and hardware.
Please follow these instructions for easy assembly.
PL 107-A1
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Keep all hardware parts out of reach of children.
IMPORTANT !!
being scratched.
Do not tighten any screws or bolts until the unit is completely assembled.
Check that you have all parts and hardware.
BOX / FILE PEDESTAL
JCBC Screw
M6 x 40mm = 4pcs
14Washer = 8pcs
Pencil Tray
1 no.
1
6
#8 x 112"
Pan Head Screw
2 Pcs
6 Hole
L-Bracket
2 Pcs
Metal Scallop
Shape Handle
2 Sets
7
2
File Clip
2 Pcs
8
3
Keys
1 Set
M4 x 65
Allen-Key
1 Pc
302 x 16 x 3mm
Aluminum Bar
1 Pc
9
4
10
5
Screw
#6 x 5
8"
12 Pcs
PAGE 1 OF 2

1
5
3
2
1
1
Attach the File Clip(2) on the
drawer side.
Insert the Aluminum Bar(3) into
the clip.
Attach Handle(1) to the drawer
front and screw it from behind
drawer front.
Additional Hardware.
Please note that we have enclosed additional hardware
to allow you to attach this box / file pedestal to
underside of most desks.
4
2
3
Attach the L-Bracket(6)
to underside of
worksurface and
Side Gable of Pedestal.
6
7
* On model PL169, attach L-Bracket(6) to
bottom of Pedestal and Side Gable of desk.
Remove drawer from pedestal. Fully open drawer.
Where first slide meets second slide there is a
small clip. Pull the clip on the left hand slide up,
push the clip on the right hand slide down. Pull
drawer out.
Attach the Pencil Tray(10) on
the top drawer.
10
8
Affix Pedestal case to
Side Gable using
Pan Head Screw (8).
5
4
Mount Pedestal case to
underside of worksurface
using JCBC Screw (5).
PL 107-A1
BOX / FILE PEDESTAL
PAGE 2 OF 2